Enhancement of the detection power of surface plasmon resonance measurements by optimization of the reflection angle.

The detection limit of surface plasmon resonance (SPR) measurements has been improved by a factor of approximately 2-3.5 if the angle of incidence was near to the reflection minimum of the SPR resonance curve instead at the position of the steepest slope, the standard alignment in SPR imaging. The enhancement of the detection power, a result of signal-to-noise optimization, is demonstrated by applying a photodiode and a CCD camera for SPR detection.

Recent progress in analytical instrumentation for glycemic control in diabetic and critically ill patients.

Implementing strict glycemic control can reduce the risk of serious complications in both diabetic and critically ill patients. For this reason, many different analytical, mainly electrochemical and optical sensor approaches for glucose measurements have been developed. Self-monitoring of blood glucose (SMBG) has been recognised as being an indispensable tool for intensive diabetes therapy.

Differential surface plasmon resonance imaging for high-throughput bioanalyses.

A new imaging technique for high-throughput surface plasmon resonance (SPR) measurements is described. It is the application of a CCD camera for simultaneous processing of two images at two different wavelengths provided by two laser diodes. The two lasers are brought to resonance by tuning of the angle of incidence so that the detection power and the dynamic range are optimized for the wavelength pair selected.

Ion mobility spectrometry for food quality and safety.

Ion mobility spectrometry is known to be a fast and sensitive technique for the detection of trace substances, and it is increasingly in demand not only for protection against explosives and chemical warfare agents, but also for new applications in medical diagnosis or process control. Generally, a gas phase sample is ionized by help of ultraviolet light, ss-radiation or partial discharges. The ions move in a weak electrical field towards a detector.

Analysis of biosensors by chemically specific optical techniques. Chemiluminescence-imaging and infrared spectroscopic mapping ellipsometry.

The standard methods currently used to read out microarrays are fluorescent and chemiluminescent imaging techniques. These methods require labeling of a component with a marker and, usually, only the concentration of the marker molecule is detected. A label-free imaging method that also enables quantitative spectroscopic analysis of the composition and component interaction would be of great advantage.

Spatially resolved element analysis of historical violin varnishes by use of muPIXE.

External muPIXE has been used for characterisation of small samples of varnish from historical violins, and pieces of varnished wood from historical and modern stringed instruments. To obtain spatially resolved information about the distribution of elements across the varnish layers single-spot analysis, line-scans, and area-mapping were performed. Local resolution of approximately 20 mum was obtained from the 3 MeV, 1 nA proton micro-probe.

Separation and identification of phytosiderophores and their metal complexes in plants by zwitterionic hydrophilic interaction liquid chromatography coupled to electrospray ionization mass spectrometry.

A sensitive method for the separation of different phytosiderophores (PS) of the mugineic acid (MA) family, and the candidate ligand for intracellular metal transport in plants nicotianamine (NA), and respective metal complexes in plants by zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC) coupled to electrospray ionization mass spectrometry (ESI-MS) is described. Separation of mugineic acid, 2'-deoxymugineic acid (DMA), 3-epi-hydroxymugineic acid (epi-HMA), nicotianamine, Fe(III)-DMA, Fe(III)-NA, M(II)-DMA, and M(II)-NA complexes (M(II)=Zn(II), Cu(II), Ni(II), and Fe(II)), was achieved within 22 min on the ZIC-HILIC column by using a gradient elution with a mobile phase consisting of ammonium acetate and acetonitrile at pH 7.3, at a flow rate of 0.

Controlling semiconductor nanoparticle size distributions with tailored ultrashort pulses.

The laser generation of size-controlled semiconductor nanoparticle formation under gas phase conditions is investigated. It is shown that the size distribution can be changed if picosecond pulse sequences of tailored ultra short laser pulses (<200 fs) are employed. By delivering the laser energy in small packages, a temporal energy flux control at the target surface is achieved, which results in the control of the thermodynamic pathway the material takes.

Infrared transmission spectrometry for the determination of urea in microliter sample volumes of blood plasma dialysates.

Application of mid-infrared spectroscopy for the determination of urea in blood plasma dialysates of microliter sample volumes using a transmission microcell was investigated. Infrared spectra of the dialysates of plasma samples collected from 75 different patients using CMA 60 microdialysis catheters were evaluated with multivariate partial least squares regression. Using the absorbance spectral data from 1520-1420 cm(-1) and 1220-1120 cm(-1), a minimum standard error of prediction (SEP) of 0.

Scaling and the design of miniaturized chemical-analysis systems.

Micrometre-scale analytical devices are more attractive than their macroscale counterparts for various reasons. For example, they use smaller volumes of reagents and are therefore cheaper, quicker and less hazardous to use, and more environmentally appealing. Scaling laws compare the relative performance of a system as the dimensions of the system change, and can predict the operational success of miniaturized chemical separation, reaction and detection devices before they are fabricated.

Conductivity detection on microchips.

Conductivity detection as a versatile detection technique for chip-based electrophoretic separation methods is described and the basic principles are discussed. The necessary electronic equipment and technologies to implement the detection electrodes on a microchip are presented. A difference between contact and contactless detection is made and the resulting advantages and problems are shown.

Construction and analytical application of an on-column photo reactor for improved detection of iron-species as plant metabolites in capillary flow injection and capillary electrophoresis.

An on-column photo reactor for CE, which is constructed from UV-transparent capillaries and a small Pen-Ray UV lamp, is applied to the analysis of small, non-covalent iron-species. These iron-species, e.g.

Electrostatic induction of the electric field into free-flow electrophoresis devices.

The electrostatic induction of an applied voltage causes electrophoretic separation under free-flow conditions and no electrolysis or electric current flowing between the metal electrodes was observed.

On-chip extrusion of lipid vesicles and tubes through microsized apertures.

In this work we present the formation of micrometre-sized lipid vesicles and tubes with perfectly homogeneous diameter and extraordinary length. The method is a novel approach for unconventional fabrication of soft-matter microstructured devices based on the combination of top-down and bottom-up fabrication processes. Photolithography techniques are applied to fabricate microsized apertures that provide the requirements to form lipid structures with predictable size and to align and guide the vesicles and tubes in microstructured channels.

Lab-on-a-chip: microfluidics in drug discovery.

Miniaturization can expand the capability of existing bioassays, separation technologies and chemical synthesis techniques. Although a reduction in size to the micrometre scale will usually not change the nature of molecular reactions, laws of scale for surface per volume, molecular diffusion and heat transport enable dramatic increases in throughput. Besides the many microwell-plate- or bead-based methods, microfluidic chips have been widely used to provide small volumes and fluid connections and could eventually outperform conventionally used robotic fluid handling.

Femtosecond laser ablation elemental mass spectrometry.

Laser ablation mass spectrometry (LA-MS) has always been an interesting method for the elemental analysis of solid samples. Chemical analysis with a laser requires small amounts of material. Depending on the analytical detection system, subpicogram quantities may be sufficient.

Production of ultrafine particles by nanosecond laser sampling using orthogonal prepulse laser breakdown.

The particle size distribution and composition of nanosecond laser-generated aerosols from brass samples in atmospheric argon has been measured by low-pressure impaction and subsequent quantitative analysis of the aerosols by total reflection X-ray fluorescence. Ablation was performed applying a Nd:YAG laser at 1.06 microm both without and with a prepulse plasma breakdown generated by a second Nd:YAG laser at 2-60 micros prior to the ablation pulse.

Spectral variable selection for partial least squares calibration applied to authentication and quantification of extra virgin olive oils using Fourier transform Raman spectroscopy.

The limits of quantitative multivariate assays for the analysis of extra virgin olive oil samples from various Greek sites adulterated by sunflower oil have been evaluated based on their Fourier transform (FT) Raman spectra. Different strategies for wavelength selection were tested for calculating optimal partial least squares (PLS) models. Compared to the full spectrum methods previously applied, the optimum standard error of prediction (SEP) for the sunflower oil concentrations in spiked olive oil samples could be significantly reduced.

Process analysis using ion mobility spectrometry.

Ion mobility spectrometry, originally used to detect chemical warfare agents, explosives and illegal drugs, is now frequently applied in the field of process analytics. The method combines both high sensitivity (detection limits down to the ng to pg per liter and ppb(v)/ppt(v) ranges) and relatively low technical expenditure with a high-speed data acquisition. In this paper, the working principles of IMS are summarized with respect to the advantages and disadvantages of the technique.

Coupling of SPME with MCC/UV-IMS as a tool for rapid on-site detection of groundwater and surface water contamination.

The combination of headspace solid phase microextraction (HS-SPME) [1] with fast chromatographic pre-separation by means of multi-capillary columns (MCC) coupled to an ion mobility spectrometer equipped with a 10.6 eV photoionisation source was applied to rapid on-site monitoring of ground and surface water contaminations. Under field conditions, water contaminants were directly detectable down to the upper microg/L range.

Direct optical emission spectroscopy of liquid analytes using an electrolyte as a cathode discharge source (ELCAD) integrated on a micro-fluidic chip.

Atomic emission detection of metallic species in aqueous solutions has been performed using a miniaturised plasma created within a planar, glass micro-fluidic chip. Detection was achieved using an Electrolyte as a Cathode Discharge source (ELCAD) in which the sample solution itself is used as the cathode for the discharge. To realise the ELCAD technique within a micro-fluidic device, a parallel liquid-gas flow was set up in a micro-channel and a glow discharge ignited between the flowing liquid sample surface and a metal wire anode.

Double-wavelength technique for surface plasmon resonance measurements: basic concept and applications for single sensors and two-dimensional sensor arrays.

A new technique for on-line monitoring of analyte binding to sensor surfaces by surface plasmon resonance (SPR) detection is described. It is based on differential measurements using two wavelengths provided by two diode lasers. The technique is as simple and robust as the conventional SPR detection measuring the reflected radiation at fixed incidence angle, but it has the advantage of being nonsensitive to variations of the resonance width and providing essentially higher signal/noise ratios.