X-ray Free Electron Laser-Induced Synthesis of ε-Iron Nitride at High Pressures.

The ultrafast synthesis of ε-FeN in a diamond-anvil cell (DAC) from Fe and N under pressure was observed using serial exposures of an X-ray free electron laser (XFEL). When the sample at 5 GPa was irradiated by a pulse train separated by 443 ns, the estimated sample temperature at the delay time was above 1400 K, confirmed by transformation of α- to γ-iron. Ultimately, the Fe and N reacted uniformly throughout the beam path to form FeN, as deduced from its established equation of state (EOS).

Distance makes a difference in crystalline photoluminescence.

Crystallization-induced photoluminescence weakening was recently revealed in ultrasmall metal nanoparticles. However, the fundamentals of the phenomenon are not understood yet. By obtaining conformational isomer crystals of gold nanoclusters, we investigate crystallization-induced photoluminescence weakening and reveal that the shortening of interparticle distance decreases photoluminescence, which is further supported by high-pressure photoluminescence experiments.

Benchmark dataset for the convex hull of 2D disks.

In this paper, we present a benchmark dataset which can be used to evaluate the algorithms to construct the convex hull of 2D disks. The dataset contains disk arrangements including general and extremely biased cases, which are generated by a C++ program. The dataset is related to an article: "QuickhullDisk: A Faster Convex Hull Algorithm for Disks" in which the QuickhullDisk algorithm is presented and compared to the incremental algorithm which was reported by Devillers and Golin in 1995 [1].

Tuning the Photoresponse of Nano-Heterojunction: Pressure-Induced Inverse Photoconductance in Functionalized WO Nanocuboids.

Inverse photoconductivity (IPC) is a unique photoresponse behavior that exists in few photoconductors in which electrical conductivity decreases with irradiation, and has great potential applications in the development of photonic devices and nonvolatile memories with low power consumption. However, it is still challenging to design and achieve IPC in most materials of interest. In this study, pressure-driven photoconductivity is investigated in n-type WO nanocuboids functionalized with p-type CuO nanoparticles under visible illumination and an interesting pressure-induced IPC accompanying a structural phase transition is found.

Flatbands and Emergent Ferromagnetic Ordering in Fe_{3}Sn_{2} Kagome Lattices.

A flatband representing a highly degenerate and dispersionless manifold state of electrons may offer unique opportunities for the emergence of exotic quantum phases. To date, definitive experimental demonstrations of flatbands remain to be accomplished in realistic materials. Here, we present the first experimental observation of a striking flatband near the Fermi level in the layered Fe_{3}Sn_{2} crystal consisting of two Fe kagome lattices separated by a Sn spacing layer.

Controlling electric potential to inhibit solid-electrolyte interphase formation on nanowire anodes for ultrafast lithium-ion batteries.

With increasing demand for high-capacity and rapidly rechargeable anodes, problems associated with unstable evolution of a solid-electrolyte interphase on the active anode surface become more detrimental. Here, we report the near fatigue-free, ultrafast, and high-power operations of lithium-ion battery anodes employing silicide nanowires anchored selectively to the inner surface of graphene-based micro-tubular conducting electrodes. This design electrically shields the electrolyte inside the electrode from an external potential load, eliminating the driving force that generates the solid-electrolyte interphase on the nanowire surface.

Perovskite Nanoparticle Composite Films by Size Exclusion Lithography.

Perovskite nanoparticle composite films with capability of high-resolution patterning (≥2 µm) and excellent resistance to various aqueous and organic solvents are prepared by in situ photosynthesis of acrylate polymers and formamidinium lead halide (FAPbX ) nanoparticles. Both positive- and negative-tone patterns of FAPbX nanoparticles are created by controlling the size exclusive flow of nanoparticles in polymer networks. The position of nanoparticles is spatially controlled in both lateral and vertical directions.

The Nature of Bonding in Bulk Tellurium Composed of One-Dimensional Helical Chains.

Bulk tellurium (Te) is composed of one-dimensional (1D) helical chains which have been considered to be coupled by van der Waals (vdW) interactions. However, on the basis of first-principles density functional theory calculations, we here propose a different bonding nature between neighboring chains: i.e.

Temperature dependence of aggregated structure of β-carotene by absorption spectral experiment and simulation.

β-carotene can self-assemble to form J- or H-type aggregate in hydrophilic environments, which is crucial for the proper functioning of biological system. Although several ways controlling the formation of the two types of aggregate in hydrated ethanol have been investigated in recent years, our study provided another way to control whether J- or H- β-carotene was formed and presented a method to investigate the aggregated structure. For this purpose, the aggregates of β-carotene formed at different temperatures were studied by UV-Vis spectra and a computational method based on Frenkel exciton was applied to simulate the absorption spectra to obtain the aggregated structure of the β-carotene.

In Situ Observations of Thermoreversible Gelation and Phase Separation of Agarose and Methylcellulose Solutions under High Pressure.

Thermoreversible sol-gel transitions of agarose and methylcellulose (MC) aqueous solutions on isobaric cooling or heating under high pressure up to 400 MPa have been investigated by in situ observations of optical transmittance and falling-ball experiments. For agarose, which undergoes the gelation on cooling, the application of pressure caused a gradual rise in the cloud-point temperature over the whole pressure range examined, which is almost consistent with the pressure dependence of gelling temperature estimated by falling-ball experiments, suggesting that agarose gel is stabilized by compression and that the gelation occurs nearly in parallel with phase separation under ambient and high-pressure conditions. For MC, which undergoes the gelation on heating, the cloud-point temperature showed a slight rise with an initial elevation of pressure up to ∼150 MPa, whereas it showed a marked depression above 200 MPa.

In situ crystallization of ionic liquid [Emim][PF6] from methanol solution under high pressure.

The solubility of 1-ethyl-3-methylimidazolium hexafluorophosphate ([Emim][PF6]) in methanol under high pressure is newly measured quantitatively according to the correlation between the ratios of Raman intensity and the concentrations. In situ crystallization and cation conformation of [Emim][PF6] from methanol solution under high pressure have been investigated by using Raman spectroscopy in detail. Remarkably, crystal polymorphism was observed and two crystalline phases (phases I and II) coexisted under high pressure up to ∼ 1.

In situ observation of heat- and pressure-induced gelation of methylcellulose by fluorescence measurement.

In situ observation of heat- and pressure-induced gelation of methylcellulose (MC) aqueous solution has been studied by using dynamic viscoelastic and fluorescence measurements. The storage modulus G' decreased gradually first on heating, and then leveled off in the temperature range from 25 °C to 75 °C. Methylcellulose solutions were subjected to pressures up to 450 MPa by using a high pressure cell.

In situ observation of multiple phase transitions in low-melting ionic liquid [BMIM][BF4] under high pressure up to 30 GPa.

In situ characterization of phase transitions and direct microscopic observations of a low-melting ionic liquid, 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIM][BF(4)]), has been performed in detail by Raman spectroscopy. Compression of [BMIM][BF(4)] was measured under hydrostatic pressure up to ~30.0 GPa at room temperature by using a high-pressure diamond anvil cell.

Insulin forms amyloid in a strain-dependent manner: an FT-IR spectroscopic study.

The presence of 20% (v/v) ethanol triggers growth of insulin amyloid with distinct infrared spectroscopic features, compared with the fibrils obtained under ambient conditions. Here we report that the two insulin amyloid types behave in the prion strain-like manner regarding seeding specificity and ability of the self-propagating conformational template to overrule unfavorable environmental factors and maintain the initial folding pattern. The type of the original seed has been shown to prevail over cosolvent effects and determines spectral position and width of the amide I' infrared band of the heterogeneously seeded amyloid.

The diastereomeric assembly of polylysine is the low-volume pathway for preferential formation of beta-sheet aggregates.

The interaction of left- and right-handed polylysine chains (poly(D-lysine) and poly(L-lysine)) results in a dramatic increase in the propensity to form aggregated beta-sheet structure (and amyloid-like fibrils), which is reflected by an approximately 15 degrees C decrease of temperature of the alpha-helix-to-beta-sheet transition. While a relative volume expansion of 13-19 mL x mol(-1) accompanies the alpha-to-beta-transition in a single enantiomer, this does not hold true for the mixture, which, along with substantially more negative heat capacity changes, points to a lower solvent-entropy cost of the transition as the possible thermodynamic driving force of the diastereomeric aggregation. The underlying solvational mechanism may be one of the decisive factors responsible for the spontaneous protein aggregation in vivo and, as such, may shed new light on the molecular basis of amyloid-associated diseases.

Chain-length dependence of alpha-helix to beta-sheet transition in polylysine: model of protein aggregation studied by temperature-tuned FTIR spectroscopy.

The chain-length dependence of the alpha-helix to beta-sheet transition in poly(L-lysine) is studied by temperature-tuned FTIR spectroscopy. This study shows that heterogeneous samples of poly(L-lysine), comprising polypeptide chains with various lengths, undergo the alpha-beta transition at an intermediate temperature compared to homogeneous ingredients. This holds true as long as each individual fraction of the polypeptide is capable of adopting an antiparallel beta-sheet structure.

Aggregation of bovine insulin probed by DSC/PPC calorimetry and FTIR spectroscopy.

Pressure perturbation calorimetry (PPC), differential scanning calorimetry (DSC), and time-resolved Fourier transform infrared spectroscopy (FTIR) have been employed to investigate aggregation of bovine insulin at pH 1.9. The aggregation process exhibits two distinguished phases.