Calcium Chemistry as a New Member of Post-Lithium Battery Family: What Can We Learn from Sodium and Magnesium.

Next-generation battery technologies need to consider their environmental impact throughout the whole cycle life, which has brought new chemistries based on earth-abundant elements to the spotlight. Rechargeable calcium batteries are such an emerging technology, which shows the potential to provide high cell voltage and high energy density close to lithium-ion batteries. Additionally, the use of Ca2+ as a charge carrier renders significant sustainable values.

Influence of Chloride and Electrolyte Stability on Passivation Layer Evolution at the Negative Electrode of Mg Batteries Revealed by operando EQCM-D.

Rechargeable magnesium batteries are promising for future energy storage. However, among other challenges, their practical application is hindered by low coulombic efficiencies of magnesium plating and stripping. Fundamental processes such as the formation, structure, and stability of passivation layers and the influence of different electrolyte components on them are still not fully understood.

K-Doping Suppresses Oxygen Redox in P2-NaNiCuMnO Cathode Materials for Sodium-Ion Batteries.

In P2-type layered oxide cathodes, Na site-regulation strategies are proposed to modulate the Na distribution and structural stability. However, their impact on the oxygen redox reactions remains poorly understood. Herein, the incorporation of K in the Na layer of NaNiCuMnO is successfully applied.

Understanding the Role of Imide-Based Salts and Borate-Based Additives for Safe and High-Performance Glyoxal-Based Electrolytes in Ni-Rich NMC Cathodes for Li-Ion Batteries.

Herein, the design of novel and safe electrolyte formulations for high-voltage Ni-rich cathodes is reported. The solvent mixture comprising 1,1,2,2-tetraethoxyethane and propylene carbonate not only displays good transport properties, but also greatly enhances the overall safety of the cell thanks to its low flammability. The influence of the conducting salts, that is, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium bis(fluorosulfonyl)imide (LiFSI), and of the additives lithium bis(oxalato)borate (LiBOB) and lithium difluoro(oxalato)borate (LiDFOB) is examined.

Single-Crystal P2-NaMnNiO Cathode Material with Improved Cycling Stability for Sodium-Ion Batteries.

Layered oxides constitute one of the most promising cathode materials classes for large-scale sodium-ion batteries because of their high specific capacity, scalable synthesis, and low cost. However, their practical use is limited by their low energy density, physicochemical instability, and poor cycling stability. Aiming to mitigate these shortcomings, in this work, we synthesized polycrystalline (PC) and single-crystal (SC) P2-type NaMnNiO (NMNO) cathode materials through a solid-state route and evaluated their physicochemical and electrochemical performance.

Causes and Consequences of Coronavirus Spike Protein Variability.

Coronaviruses are a large family of enveloped RNA viruses found in numerous animal species. They are well known for their ability to cross species barriers and have been transmitted from bats or intermediate hosts to humans on several occasions. Four of the seven human coronaviruses (hCoVs) are responsible for approximately 20% of common colds (hCoV-229E, -NL63, -OC43, -HKU1).

Locally Concentrated Ionic Liquid Electrolytes for Wide-Temperature-Range Aluminum-Sulfur Batteries.

Aluminum-sulfur (Al-S) batteries are promising energy storage devices due to their high theoretical capacity, low cost, and high safety. However, the high viscosity and inferior ion transport of conventionally used ionic liquid electrolytes (ILEs) limit the kinetics of Al-S batteries, especially at sub-zero temperatures. Herein, locally concentrated ionic liquid electrolytes (LCILE) formed via diluting the ILEs with non-solvating 1,2-difluorobenzene (dFBn) co-solvent are proposed for wide-temperature-range Al-S batteries.

Metal-Ion Intercalation Mechanisms in Vanadium Pentoxide and Its New Perspectives.

The investigation into intercalation mechanisms in vanadium pentoxide has garnered significant attention within the realm of research, primarily propelled by its remarkable theoretical capacity for energy storage. This comprehensive review delves into the latest advancements that have enriched our understanding of these intricate mechanisms. Notwithstanding its exceptional storage capacity, the compound grapples with challenges arising from inherent structural instability.

Conformational States of the CXCR4 Inhibitor Peptide EPI-X4-A Theoretical Analysis.

EPI-X4, an endogenous peptide inhibitor, has exhibited potential as a blocker of CXCR4-a G protein-coupled receptor. This unique inhibitor demonstrates the ability to impede HIV-1 infection and halt CXCR4-dependent processes such as tumor cell migration and invagination. Despite its promising effects, a comprehensive understanding of the interaction between EPI-X4 and CXCR4 under natural conditions remains elusive due to experimental limitations.

Water-soluble ionic carbon nitride as unconventional stabilizer for highly catalytically active ultrafine gold nanoparticles.

Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (, immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity.

Practical Cell Design for PTMA-Based Organic Batteries: an Experimental and Modeling Study.

Poly(2,2,6,6-tetramethyl-1-piperidinyloxy methacrylate) (PTMA) is one of the most promising organic cathode materials thanks to its relatively high redox potential, good rate performance, and cycling stability. However, being a p-type material, PTMA-based batteries pose additional challenges compared to conventional lithium-ion systems due to the involvement of anions in the redox process. This study presents a comprehensive approach to optimize such batteries, addressing challenges in electrode design, scalability, and cost.

Determinants of species-specific utilization of ACE2 by human and animal coronaviruses.

Utilization of human ACE2 allowed several bat coronaviruses (CoVs), including the causative agent of COVID-19, to infect humans directly or via intermediate hosts. However, the determinants of species-specific differences in ACE2 usage and the frequency of the ability of animal CoVs to use human ACE2 are poorly understood. Here we applied VSV pseudoviruses to analyze the ability of Spike proteins from 26 human or animal CoVs to use ACE2 receptors across nine reservoir, potential intermediate and human hosts.

Unraveling Propylene Oxide Formation in Alkali Metal Batteries.

The increasing need for electrochemical energy storage drives the development of post-lithium battery systems. Among the most promising new battery types are sodium-based battery systems. However, like its lithium predecessor, sodium batteries suffer from various issues like parasitic side reactions, which lead to a loss of active sodium inventory, thus reducing the capacity over time.

Tailoring Cu Electrodes for Enhanced CO Electroreduction through Plasma Electrolysis in Non-Conventional Phosphorus-Oxoanion-Based Electrolytes.

This study presents a green, ultra-fast, and facile technique for the fabrication of micro/nano-structured and porous Cu electrodes through in-liquid plasma electrolysis using phosphorous-oxoanion-based electrolytes. Besides the preferential surface faceting, the Cu electrodes exhibit unique surface structures, including octahedral nanocrystals besides nanoporous and microporous structures, depending on the employed electrolyte. The incorporation of P-atoms into the Cu surfaces is observed.

Magnesium Anode Protection by an Organic Artificial Solid Electrolyte Interphase for Magnesium-Sulfur Batteries.

In the search for post-lithium battery systems, magnesium-sulfur batteries have attracted research attention in recent years due to their high potential energy density, raw material abundance, and low cost. Despite significant progress, the system still lacks cycling stability mainly associated with the ongoing parasitic reduction of sulfur at the anode surface, resulting in the loss of active materials and passivating surface layer formation on the anode. In addition to sulfur retention approaches on the cathode side, the protection of the reductive anode surface by an artificial solid electrolyte interphase (SEI) represents a promising approach, which contrarily does not impede the sulfur cathode kinetics.

MnO nano-octahedrons embedded in nitrogen-doped graphene oxide as potent anode material for lithium-ion batteries.

Unlabelled: MnO nano-octahedrons embedded in N-doped graphene oxide (MNGO) nanosheets were synthesized using a simple, energy-efficient, and rapid microwave-digested hydrothermal route in a single step. The structural and morphological aspects of synthesized materials were evaluated by XRD, IR, Raman, FE-SEM, and HR-TEM techniques. Then, the composite MNGO was tested for its Li-ion storage properties and compared with reduced graphene oxide (rGO) and MnO materials.

Influence of Residual Water Traces on the Electrochemical Performance of Hydrophobic Ionic Liquids for Magnesium-Containing Electrolytes.

A trace amount of water is typically unavoidable as an impurity in ionic liquids, which is a huge challenge for their application in Mg-ion batteries. Here, we employed molecular sieves of different pore diameters (3, 4, and 5 Å), to effectively remove the trace amounts of water from 1-methyl-1-propylpiperidinium bis(trifluoromethylsulfonyl)imide (MPPip-TFSI) and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMP-TFSI). Notably, after sieving (water content <1 mg ⋅ L ), new anodic peaks arise that are attributed to the formation of different anion-cation structures induced by minimizing the influence of hydrogen bonds.

Locally Concentrated Ionic Liquid Electrolytes Enabling Low-Temperature Lithium Metal Batteries.

Lithium metal is a promising anode material for next-generation high-energy-density batteries but suffers from low stripping/plating Coulombic efficiency and dendritic growth particularly at sub-zero temperatures. Herein, a poorly-flammable, locally concentrated ionic liquid electrolyte with a wide liquidus range extending well below 0 °C is proposed for low-temperature lithium metal batteries. Its all-anion Li solvation and phase-nano-segregation solution structure are sustained at low temperatures, which, together with a solid electrolyte interphase rich in inorganic compounds, enable dendrite-free operation of lithium metal anodes at -20 °C and 0.

characterization of nanoparticles.

Nanoparticles (NPs) make for intriguing heterogeneous catalysts due to their large active surface area and excellent and often size-dependent catalytic properties that emerge from a multitude of chemically different surface reaction sites. NP catalysts are, in principle, also highly tunable: even small changes to the NP size or surface facet composition, doping with heteroatoms, or changes of the supporting material can significantly alter their physicochemical properties. Because synthesis of size- and shape-controlled NP catalysts is challenging, the ability to computationally predict the most favorable NP structures for a catalytic reaction of interest is an in-demand skill that can help accelerate and streamline the material optimization process.

Entropic Contributions to Sodium Solvation and Solvent Stabilization upon Electrochemical Sodium Deposition from Diglyme and Propylene Carbonate Electrolytes.

The formation of an appropriate solid electrolyte interphase (SEI) at the anode of a sodium battery is crucially dependent on the electrochemical stability of solvent and electrolyte at the redox potential of Na/Na in the respective system. In order to determine entropic contributions to the relative stability of the electrolyte solution, we measure the reaction entropy of Na metal deposition for diglyme (DG) and propylene carbonate (PC) based electrolyte solutions by electrochemical microcalorimetry at single electrodes. We found a large positive reaction entropy for Na deposition in DG of Δ 234 J mol  K (c.

An Atomistic View of Platinum Cluster Growth on Pristine and Defective Graphene Supports.

Density functional theory (DFT) is used to systematically investigate the electronic structure of platinum clusters grown on different graphene substrates. Platinum clusters with 1 to 10 atoms and graphene vacancy defect supports with 0 to 5 missing C atoms are investigated. Calculations show that Pt clusters bind more strongly as the vacancy size increases.

Ionothermal synthesis of activated carbon from waste PET bottles as anode materials for lithium-ion batteries.

Waste polyethylene terephthalate (PET) bottles have become a significant post-consumer plastic waste with attendant environmental problems. Hence, ionothermal synthesis has been used to prepare activated carbon (AC) anode materials from waste PET for both high performance and sustainable lithium-ion batteries (LIB). Particularly, using choline chloride deep eutectic salts (CU-DES) does not require post-synthesis washing and thereby reduces the complexity of the process and produces materials with unique low-surface area, higher levels of graphitization/ordering, and high nitrogen doping in the obtained ACs.

Long-Cycle-Life Calcium Battery with a High-Capacity Conversion Cathode Enabled by a Ca/Li Hybrid Electrolyte.

Calcium (Ca) batteries represent an attractive option for electrochemical energy storage due to physicochemical and economic reasons. The standard reduction potential of Ca (-2.87 V) is close to Li and promises a wide voltage window for Ca full batteries, while the high abundance of Ca in the earth's crust implicates low material costs.