Operando visualisation of lithium plating by ultrasound imaging of battery cells.

While developing battery cells, the achievement of fast-charging capability is heavily dependent on avoiding metallic plating on the anode surface (i.e., lithium plating in lithium-ion cells).

Quantifying benefits of renewable investments for German residential Prosumers in times of volatile energy markets.

The COVID-19 pandemic and the Russian invasion of Ukraine have led to unseen disruptions in the global energy markets since the end of 2021. Residential renewable investments like photovoltaic systems, battery home storage systems, and heat pumps are therefore gaining traction. However, the benefits of those technologies during the energy crisis and beyond have not been fully quantified yet.

Ternary Solid Polymer Electrolytes at the Electrochemical Interface: A Computational Study.

Polymer-based solid-like gel electrolytes have emerged as a promising alternative to improve battery performance. However, there is a scarcity of studies on the behavior of these media at the electrochemical interface. In this work, we report classical MD simulations of ternary polymer electrolytes composed of poly(ethylene oxide), a lithium salt [lithium bis(trifluoromethanesulfonyl)imide], and different ionic liquids [1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide] confined between two charged and uncharged graphene-like surfaces.

Influence of LiNO on the Lithium Metal Deposition Behavior in Carbonate-Based Liquid Electrolytes and on the Electrochemical Performance in Zero-Excess Lithium Metal Batteries.

Continuous lithium (Li) depletion shadows the increase in energy density and safety properties promised by zero-excess lithium metal batteries (ZELMBs). Guiding the Li deposits toward more homogeneous and denser lithium morphology results in improved electrochemical performance. Herein, a lithium nitrate (LiNO ) enriched separator that improves the morphology of the Li deposits and facilitates the formation of an inorganic-rich solid-electrolyte interphase (SEI) resulting in an extended cycle life in Li||Li-cells as well as an increase of the Coulombic efficiency in Cu||Li-cells is reported.

Revealing the Effect of High Ni Content in Li-Rich Cathode Materials: Mitigating Voltage Decay or Increasing Intrinsic Reactivity.

Li-rich layered oxides are considered as one of the most promising cathode materials for secondary lithium batteries due to their high specific capacities, but the issue of continuous voltage decay during cycling hinders their market entry. Increasing the Ni content in Li-rich materials is assumed to be an effective way to address this issue and attracts recent research interests. However, a high Ni content may induce increased intrinsic reactivity of materials, resulting in severe side reactions with the electrolyte.

Analysis of electric vehicle charging station usage and profitability in Germany based on empirical data.

This paper provides empirical data and a profitability estimation of public charging infrastructure usage in Germany. Given that, in Germany, there are now 2.5 times as many vehicles per charging station compared with 2017, the system needs to allocate charging points efficiently.

Sparse inference and active learning of stochastic differential equations from data.

Automatic machine learning of empirical models from experimental data has recently become possible as a result of increased availability of computational power and dedicated algorithms. Despite the successes of non-parametric inference and neural-network-based inference for empirical modelling, a physical interpretation of the results often remains challenging. Here, we focus on direct inference of governing differential equations from data, which can be formulated as a linear inverse problem.

Toward the Integration of a Silicon/Graphite Anode-Based Lithium-Ion Battery in Photovoltaic Charging Battery Systems.

Solar photovoltaic (PV) energy generation is highly dependent on weather conditions and only applicable when the sun is shining during the daytime, leading to a mismatch between demand and supply. Merging PVs with battery storage is the straightforward route to counteract the intermittent nature of solar generation. Capacity (or energy density), overall efficiency, and stability at elevated temperatures are among key battery performance metrics for an integrated PV-battery system.

Long-Term Stability of Redox Mediators in Carbonate Solvents.

Scanning electrochemical microscopy (SECM) used in the feedback mode is one of the most powerful versatile analytical tools used in the field of battery research. However, the application of SECM in the field of lithium-ion batteries (LIBs) faces challenges associated with the selection of a suitable redox mediator due to its high reactivity at low potentials at lithium metal or lithiated graphite electrodes. In this regard, the electrochemical/chemical stability of 2,5-di-tert-butyl-1,4-dimethoxybenzene (DBDMB) is evaluated and benchmarked with ferrocene.

Simultaneous Formation of Interphases on both Positive and Negative Electrodes in High-Voltage Aqueous Lithium-Ion Batteries.

The formation of solid-electrolyte interphase (SEI) in "water-in-salt" electrolyte (WiSE) expands the electrochemical stability window of aqueous electrolytes beyond 3.0 V. However, the parasitic hydrogen evolution reaction that drives anode corrosion, cracking, and the subsequent reformation of SEI still occurs, compromising long-term cycling performance of the batteries.

Production of high-energy Li-ion batteries comprising silicon-containing anodes and insertion-type cathodes.

Rechargeable Li-based battery technologies utilising silicon, silicon-based, and Si-derivative anodes coupled with high-capacity/high-voltage insertion-type cathodes have reaped significant interest from both academic and industrial sectors. This stems from their practically achievable energy density, offering a new avenue towards the mass-market adoption of electric vehicles and renewable energy sources. Nevertheless, such high-energy systems are limited by their complex chemistry and intrinsic drawbacks.

Stabilizing the Solid-Electrolyte Interphase with Polyacrylamide for High-Voltage Aqueous Lithium-Ion Batteries.

The introduction of "water-in-salt" electrolyte (WiSE) concept opens a new horizon to aqueous electrochemistry that is benefited from the formation of a solid-electrolyte interphase (SEI). However, such SEI still faces multiple challenges, including dissolution, mechanical damaging, and incessant reforming, which result in poor cycling stability. Here, we report a polymeric additive, polyacrylamide (PAM) that effectively stabilizes the interphase in WiSE.

Opportunities and Limitations of Ionic Liquid- and Organic Carbonate Solvent-Based Electrolytes for Mg-Ion-Based Dual-Ion Batteries.

Dual-ion batteries (DIBs) offer a great alternative to state-of-the-art lithium-ion batteries, based on their high promises due to the absence of transition metals and the use of low-cost materials, which could make them economically favorable targeting stationary energy storage applications. In addition, they are not limited by certain metal cations, and DIBs with a broad variety of utilized ions could be demonstrated over the last years. Herein, a systematic study of different electrolyte approaches for Mg-ion-based DIBs was conducted.

A Review on Li /H Exchange in Garnet Solid Electrolytes: From Instability against Humidity to Sustainable Processing in Water.

Garnet-based Li-ion conductors are one of the most promising oxide-ceramic solid electrolytes for next-generation Li batteries. However, they undergo a Li /H exchange (LHX) reaction with most protic solvents used in component manufacturing routes and even with moisture in ambient air. These protonated garnets show a lower Li-ionic conductivity, and even if only the surface is protonated, this degraded layer hinders the Li-ion exchange with, for example, a metallic Li anode.

Dibenzo[a,e]Cyclooctatetraene-Functionalized Polymers as Potential Battery Electrode Materials.

Organic redox polymers are attractive electrode materials for more sustainable rechargeable batteries. To obtain full-organic cells with high operating voltages, redox polymers with low potentials (<2 V versus Li|Li ) are required for the negative electrode. Dibenzo[a,e]cyclooctatetraene (DBCOT) is a promising redox-active group in this respect, since it can be reversibly reduced in a two-electron process at potentials below 1 V versus Li|Li .

Insights into the Solubility of Poly(vinylphenothiazine) in Carbonate-Based Battery Electrolytes.

Organic materials are promising candidates for next-generation battery systems. However, many organic battery materials suffer from high solubility in common battery electrolytes. Such solubility can be overcome by introducing tailored high-molecular-weight polymer structures, for example, by cross-linking, requiring enhanced synthetic efforts.

Tailoring of Gradient Particles of Li-Rich Layered Cathodes with Mitigated Voltage Decay for Lithium-Ion Batteries.

Voltage decay during cycling is still a major issue for Li-rich cathodes in lithium ion batteries. Recently, the increase of Ni content has been recognized as an effective way to mitigate this problem, although it leads to lower-capacity materials. To find a balance between voltage decay and high capacity, particles of Li-rich materials with concentration gradients of transition metals have been prepared.

Conventional Electrolyte and Inactive Electrode Materials in Lithium-Ion Batteries: Determining Cumulative Impact of Oxidative Decomposition at High Voltage.

High-voltage electrodes based on, for example, LiNi Mn 0 (LNMO) active material require oxidative stability of inactive materials up to 4.95 V vs. Li|Li .

Synthesis of High Surface Area α-KMnO Nanoneedles Using Extract of Broccoli as Bioactive Reducing Agent and Application in Lithium Battery.

With the aim to reduce the entire cost of lithium-ion batteries and to diminish the environmental impact, the extract of broccoli is used as a strong benign reducing agent for potassium permanganate to synthesize α-KMnO cathode material with pure nanostructured phase. Material purity is confirmed by X-ray powder diffraction and thermogravimetric analyses. Images of transmission electron microscopy show samples with a spider-net shape consisting of very fine interconnected nanoneedles.

Phenothiazine-Functionalized Poly(norbornene)s as High-Rate Cathode Materials for Organic Batteries.

Organic cathode materials are handled as promising candidates for new energy-storage solutions based on their transition-metal-free composition. Phenothiazine-based polymers are attractive owing to their redox potential of 3.5 V vs.

In situLi-NMR analysis of lithium metal surface deposits with varying electrolyte compositions and concentrations.

A major challenge of lithium metal electrodes, in theory a suitable choice for rechargeable high energy density batteries, comprises non-homogeneous lithium deposition and the growth of reactive high surface area lithium, which eventually yields active material losses and safety risks. While it is hard to fully avoid inhomogeneous deposits, the achievable morphology of the occurring lithium deposits critically determines the long-term cycling behaviour of the cells. In this work, we focus on a combined scanning electron microscopy (SEM) and Li nuclear magnetic resonance spectroscopy (Li-NMR) study to unravel the impact of the choice of conducting salts (LiPF and LiTFSI), solvents (EC : DEC, 3 : 7, DME : DOL, 1 : 1), as well as their respective concentrations (1 M, 3 M) on the electrodeposition process, demonstrating that lithium deposition morphologies may be controlled to a large extent by proper choice of cycling conditions and electrolyte constituents.

The Power of Stoichiometry: Conditioning and Speciation of MgCl/AlCl in Tetraethylene Glycol Dimethyl Ether-Based Electrolytes.

In many Mg-based battery systems, the reversibility of Mg deposition and dissolution is lowered by parasitic formation processes of the electrolyte. Therefore, high Coulombic efficiencies of Mg deposition and dissolution are only achieved after several "conditioning" cycles. As this phenomenon is especially reported for AlCl-containing solutions, this study focuses on the "conditioning" mechanisms of MgCl/AlCl and MgHMDS/AlCl (HMDS = hexamethyldisilazide) in tetraethylene glycol dimethyl ether (TEGDME)-based electrolytes.