A high performance composite separator with robust environmental stability for dendrite-free lithium metal batteries.

The garnet ceramic LiLaZrTaO (LLZTO) modified separators have been proposed to overcome the poor thermal stability and wettability of commercial polyolefin separators. However, the side reaction of LLZTO in the air leads to deterioration of environmental stability of composite separators (PP-LLZTO), which will limit the electrochemical performance of batteries. Herein, the LLZTO with the polydopamine (PDA) coating (LLZTO@PDA) was prepared by solution oxidation, and then applied it to a commercial polyolefin separator to achieve a composite separator (PP-LLZTO@PDA).

Atomic-scale study clarifying the role of space-charge layers in a Li-ion-conducting solid electrolyte.

Space-charge layers are frequently believed responsible for the large resistance of different interfaces in all-solid-state Li batteries. However, such propositions are based on the presumed existence of a Li-deficient space-charge layer with insufficient charge carriers, instead of a comprehensive investigation on the atomic configuration and its ion transport behavior. Consequently, the real influence of space-charge layers remains elusive.

Modification of the small intestinal submucosa membrane with oligopeptides screened from intrinsically disordered regions to promote angiogenesis and accelerate wound healing.

A slow vascularization rate is considered one of the major disadvantages of biomaterials used for accelerating wound healing. Several efforts, including cellular and acellular technologies, have been made to facilitate biomaterial-induced angiogenesis. However, no well-established techniques for promoting angiogenesis have been reported.

A Malleable Composite Dough with Well-Dispersed and High-Content Boron Nitride Nanosheets.

Aggregation of two-dimensional (2D) nanosheet fillers in a polymer matrix is a prevalent problem when the filler loading is high, leading to degradation of physical and mechanical properties of the composite. To avoid aggregation, a low-weight fraction of the 2D material (<5 wt %) is usually used to fabricate the composite, limiting performance improvement. Here, we develop a mechanical interlocking strategy where well-dispersed high filling content (up to 20 wt %) of boron nitride nanosheets (BNNSs) can be incorporated into a polytetrafluoroethylene (PTFE) matrix, resulting in a malleable, easy-to-process and reusable BNNS/PTFE composite dough.

SIS membrane modification to improve antimicrobial and osteogenic properties for guide bone regeneration.

The guided bone regeneration (GBR) technique is the most common and durable approach to repairing bone defects in periodontal surgery. However, membrane exposure causes bacterial infiltration, which lowers the functional integrity of the barrier membrane and destroys bone repair. Here, an antibacterial peptide-modified small intestinal submucosa (SIS) membrane is used as a new GBR membrane for effective bone regeneration.

Piezotronic Effect Induced Schottky Barrier Decrease to Boost the Plasmonic Charge Separation of BaTiO-Au Heterojunction for the Photocatalytic Selective Oxidation of Aminobenzyl Alcohol.

Charge carrier transfer efficiency as a crucial factor determines the performance of heterogeneous photocatalysis. Here, we demonstrate a simple nanohybrid structure of BaTiO-Au (BTO-Au) for the efficient selective oxidization of benzyl alcohol to benzaldehyde upon piezotronic effect boosted plasmonic photocharge carrier transfer. With the aid of ultrasonic mechanical vibration, the reaction rate of the photocatalytic organic conversion would be considerably accelerated, which is about 4.

Novel In Situ Growth of ZIF-8 in Porous Epoxy Matrix for Mechanically Robust Composite Electrolyte of High-Performance, Long-Life Lithium Metal Batteries.

Polymer electrolytes (PEs) with high flexibility, low cost, and excellent interface compatibility have been considered as an ideal substitute for traditional liquid electrolytes for high safety lithium metal batteries (LMBs). Nevertheless, the mechanical strength of PEs is generally poor to prevent the growth of lithium dendrites during the charge/discharge process, which seriously restricts their wide practical applications. Herein, a mechanical robust ZIF-8/epoxy composite electrolyte with unique pore structure was prepared, which effectively inhibited the growth of lithium dendrites.

Rapid electrophoretic deposition of biocompatible graphene coatings for high-performance recording neural electrodes.

The electrical and biological interfacial properties of invasive electrodes have a significant impact on the performance and longevity of neural recordings in the brain. In this study, we demonstrated rapid electrophoretic deposition and electrochemical reduction of graphene oxide (GO) on metal-based neural electrodes. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and other characterizations confirmed the existence of a uniform and effectively reduced graphene oxide coating.

Mussel-Inspired Adhesive, Antibacterial, and Stretchable Composite Hydrogel for Wound Dressing.

Hydrogels have attracted extensive attention in the field of biomedicine because of their similar structure to extracellular matrix (ECM) and good biocompatibility. However, the adhesiveness, mechanical properties, and antibacterial properties of conventional hydrogels are not satisfactory. In this study, multifunctional chitosan/polydopamine/polyacrylamide (CS/PDA/PAM) hydrogels are prepared through a nature-inspired strategy.

Silicon carbide catalytic ceramic membranes with nano-wire structure for enhanced anti-fouling performance.

Membrane fouling is a critical challenge for current ceramic membranes, which suffer from low flux and insufficient removal. Development of self-cleaning catalytic ceramic membranes is promising to address this challenge. Herein, we design heterogeneous silicon carbide ceramic membranes featuring a novel structure of g-CN-decorated β-SiC nano-wire catalytic functional layer, which enables enhanced anti-fouling self-cleaning performance.

Strategy of a cell-derived extracellular matrix for the construction of an osteochondral interlayer.

Osteochondral defects pose an enormous challenge due to the lack of an effective repair strategy. To tackle this issue, the importance of a calcified cartilage interlayer (CCL) in modulating osteochondral regeneration should be valued. Herein, we proposed that an extracellular matrix (ECM) derived from a suitable cell source might efficiently promote the formation of calcified cartilage.

Mechanical Properties and In Vitro Biocompatibility of Hybrid Polymer-HA/BAG Ceramic Dental Materials.

The aim of this study is to prepare hybrid polymer-ceramic dental materials for chairside computer-aided design/computer-aided manufacturing (CAD/CAM) applications. The hybrid polymer-ceramic materials were fabricated via infiltrating polymerizable monomer mixtures into sintered hydroxyapatite/bioactive glass (HA/BAG) ceramic blocks and thermo-curing. The microstructure was observed by scanning electron microscopy and an energy-dispersive spectrometer.

Self-reinforcement hydrogel with sustainable oxygen-supply for enhanced cell ingrowth and potential tissue regeneration.

Hydrogels composed of natural biopolymers are attractive for tissue regeneration applications owing to their advantages such as biocompatibility and ease of administration, etc.. Yet, the low oxygen level and the crosslinked network inside bulk hydrogels, as well as the hypoxic status in defect areas, hamper cell viability, function, and eventual tissue repair.

Single-Hole Janus Hollow Sphere.

Cross-linked epoxy resin (EP) single-hole Janus hollow spheres are prepared by cross-linking induced phase separation within an emulsion droplet and selective modification. The droplet is composed of an EP oligomer, toluene, and hexadecane. 2-Ethyl-4-methylimidazole is used as the cross-linker added to the aqueous phase.

Ethynyl and Furyl Functionalized Porphyrin Complexes as New Organic Cathodes Enabling High Power Density and Long-Term Cycling Stability.

Organic cathode materials have recently attracted abundant attention due to their flexible structural tunability and recyclability. However, the low intrinsic electrical conductivity and high solubility in electrolytes of organic electrode materials have significantly limited their practical application. Herein, we present [5,15-bis(ethynyl)-10,20-difurylporphinato] copper(II) (CuDEOP) as a new cathode for rechargeable organic lithium batteries (ROLBs).

Microsphere-Gel Composite System with Mesenchymal Stem Cell Recruitment, Antibacterial, and Immunomodulatory Properties Promote Bone Regeneration via Sequential Release of LL37 and W9 Peptides.

Various types of biomaterials have been widely used to treat complex bone defects. However, potential infection risks and inappropriate host immune responses induced by biomaterials can adversely affect the final bone repair outcome. Therefore, the development of novel bone biomaterials with antibacterial and immunomodulatory capabilities is conducive to achieving a good interaction between the host and material, thereby creating a local microenvironment favorable for osteogenesis and ultimately accelerating bone regeneration.

CeO Nanoparticle-Loaded MnO Nanoflowers for Selective Catalytic Reduction of NO with NH at Low Temperatures.

CeO nanoparticle-loaded MnO nanoflowers, prepared by a hydrothermal method followed by an adsorption-calcination technique, were utilized for selective catalytic reduction (SCR) of NO with NH at low temperatures. The effects of Ce/Mn ratio and thermal calcination temperature on the NH-SCR activity of the CeO-MnO nanocomposites were studied comprehensively. The as-prepared CeO-MnO catalysts show high NO reduction efficiency in the temperature range of 150-300 °C, with a complete NO conversion at 200 °C for the optimal sample.

Mechanically active small intestinal submucosa hydrogel for accelerating chronic wound healing.

The treatment of chronic wounds is still a challenge worldwide. Here, inspired by mechanically induced embryonic wound healing, we design a mechanically active small intestinal submucosa based hydrogel (SIS-PNIPAm). The mechanical activity, biocompatibility, and bioactivity (angiogenesis and immunoregulation) of the SIS-PNIPAm hydrogel enable the fast healing of diabetic rat full-thickness wounds.

Enhanced dielectric properties of polystyrene by using graphene incorporated styrene-butyl acrylate microspheres.

In view of the current trend of capacitor materials, the development of capacitors with high dielectric permittivity and low dielectric loss is of great interest. In this work, the dielectric permittivity of reduced graphene oxide-incorporated styrene-butyl acrylate (rGO@SBA) composite microspheres synthesized by mini-emulsion polymerization was significantly improved. rGO with 2 wt% content gave a dielectric permittivity of 11 356 (at 1 KHz), which was 1925 times higher than that of pure SBA (5.

Catalpol modulating the crosstalking between mesenchymal stromal cells and macrophages via paracrine to enhance angiogenesis and osteogenesis.

Due to the inflammatory responses associated with defect occurrence and materials implantation, immunoregulation has emerged as a promising strategy to enhance bone regeneration. It has been widely reported that a material could facilitate osteogenesis if it can guide macrophages to anti-inflammatory M2 phenotype, vice versa, a substrate will influence macrophage phenotype if it is osteoinductive. However, few studies have looked into the intercellular crosstalking directly.

Surface Characteristics and Flexural Strength of Porous-Surface Designed Zirconia Manufactured via Stereolithography.

Purpose: To design and fabricate zirconia bars with porous surfaces using stereolithography and evaluate their surface characteristics and flexural strengths.

Materials And Methods: Five groups of zirconia bars (20 mm × 4 mm × 2 mm) with interconnected porous surfaces were designed and manufactured: (i) 400-µm pore size and 50% porosity (D400-P50 group), (ii) 400-µm pore size and 30% porosity (D400-P30 group), (iii) 200-µm pore size and 50% porosity (D200-P50 group), (iv) 200-µm pore size and 30% porosity (D200-P30 group), and (v) 100-µm pore size and 30% porosity (D100-P30 group). Zirconia bars without a porous surface (NP) were used as controls.

Mimicking osteochondral interface using pre-differentiated BMSCs/fibrous mesh complexes to promote tissue regeneration.

The heterogeneous nature of osteochondral tissue requires the construction of implant with biomimetic gradients. Electrospun fibrous meshes with different designs provide the feasibility in arranging such a kind of gradient structure layer-by-layer stacking. In this study, a kind of triphasic implant was constructed by layering pre-differentiated cell sheets, which were hold by electrospun poly(L-lactide)/gelatin (PLLA/Gel) fibrous meshes containing hyaluronic acid and chondroitin sulfate for the cartilage layer or hydroxyapatite for the bone layer.

Nanostructured Superhydrophobic Titanium-Based Materials: A Novel Preparation Pathway to Attain Superhydrophobicity on TC4 Alloy.

This study develops the nanostructured superhydrophobic titanium-based materials using a combined preparation method of laser marking step and the subsequent anodizing step. The structural properties were determined using an X-ray diffractometer (XRD) and scanning electron microscope (SEM), while the performance was explored by wear and corrosion tests. The laser marking caused a rough surface with paralleled grooves and protrusions, revealing surface superhydrophobicity after organic modification.

Modulation of electrical and thermal transports through lattice distortion in BaTiNbOsolid solutions.

The electron and heat transports in solids are through the movement of carrier electrons and quantized lattice vibrations (phonons), which are sensitive to the lattice distortion and ionized impurities, and are essential aspects for the development of novel thermoelectric materials. In this study, we systematically investigated the modulations of electrical and thermal conductivities of BaTiNbOsolid solution (BTNO, 0 ≤  ≤ 1) epitaxial films. At room temperature, BaTiObelongs to tetragonal perovskite and exhibits electron conduction through doubly degenerated Ti 3d-torbitals upon doping, while BaNbObelongs to cubic perovskite and exhibits metallic electron conduction through partially filled triply degenerate Nb 4d-torbitals.