A biofunctionalized quantum dot-nickel oxide nanorod based smart platform for lipid detection.

A reagent-free, low-cost and sensitive immunosensor has been fabricated using anti-apolipoprotein B (AAB) conjugated l-cysteine in situ capped cadmium sulfide quantum dots (CysCdS QDs) bound to nickel oxide nanorods (nNiO) for detection of low density lipoprotein (LDL) molecules in human serum samples. The structural and morphological properties of AAB conjugated CysCdS QDs and nNiO have been investigated using electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and UV-visible techniques. In this immunosensor, the synthesized NiO nanorods act as mediators that allow the direct electron transfer due to their channeling effect resulting in a mediator-free biosensor.

Mesoporous Few-Layer Graphene Platform for Affinity Biosensing Application.

A label-free, highly reproducible, sensitive, and selective biosensor is proposed using antiapolipoprotein B 100 (AAB) functionalized mesoporous few-layer reduced graphene oxide and nickel oxide (rGO-NiO) nanocomposite for detection of low density lipoprotein (LDL) molecules. The formation of mesoporous rGO-NiO composite on indium tin oxide conductive electrode has been accomplished via electrophoretic technique using colloidal suspension of rGO sheets and NiO nanoparticles. This biosensor shows good stability obtained by surface conjugation of antibody AAB molecules with rGO-NiO matrix by EDC-NHS coupling chemistry.

A surface functionalized nanoporous titania integrated microfluidic biochip.

We present a novel and efficient nanoporous microfluidic biochip consisting of a functionalized chitosan/anatase titanium dioxide nanoparticles (antTiO2-CH) electrode integrated in a polydimethylsiloxane (PDMS) microchannel assembly. The electrode surface can be enzyme functionalized depending on the application. We studied in detail cholesterol sensing using the cholesterol esterase (ChEt) and cholesterol oxidase (ChOx) functionalized chitosan supported mesoporous antTiO2-CH microfluidic electrode.

Chitosan-modified carbon nanotubes-based platform for low-density lipoprotein detection.

We have fabricated an immunosensor based on carbon nanotubes and chitosan (CNT-CH) composite for detection of low density lipoprotein (LDL) molecules via electrochemical impedance technique. The CNT-CH composite deposited on indium tin oxide (ITO)-coated glass electrode has been used to covalently interact with anti-apolipoprotein B (antibody: AAB) via a co-entrapment method. The biofunctionalization of AAB on carboxylated CNT-CH surface has been confirmed by Fourier transform infrared spectroscopic and electron microscopic studies.

Lipid-lipid interactions in aminated reduced graphene oxide interface for biosensing application.

A label-free biosensor based on antiapolipoprotein B 100 functionalized-aminated reduced graphene oxide interface has been fabricated for detection of low density lipoprotein (LDL or lipid) cholesterol. The aminated reduced graphene oxide (NH2-rGO) based electrode surface is covalently functionalized with antiapolipoprotein B 100 (AAB or lipid) using EDC/NHS coupling chemistry. The lipid-lipid interactions at the NH2-rGO electrode surface have been investigated using electrochemical impedance spectroscopic technique.

Protein-conjugated quantum dots interface: binding kinetics and label-free lipid detection.

We propose a label-free biosensor platform to investigate the binding kinetics using antigen-antibody interaction via electrochemical and surface plasmon resonance (SPR) techniques. The L-cysteine in situ capped cadmium sulfide (CdS; size < 7 nm) quantum dots (QDs) self-assembled on gold (Au) coated glass electrode have been covalently functionalized with apolipoprotein B-100 antibodies (AAB). This protein conjugated QDs-based electrode (AAB/CysCdS/Au) has been used to detect lipid (low density lipoprotein, LDL) biomolecules.

Highly efficient bienzyme functionalized nanocomposite-based microfluidics biosensor platform for biomedical application.

This report describes the fabrication of a novel microfluidics nanobiochip based on a composite comprising of nickel oxide nanoparticles (nNiO) and multiwalled carbon nanotubes (MWCNTs), as well as the chip's use in a biomedical application. This nanocomposite was integrated with polydimethylsiloxane (PDMS) microchannels, which were constructed using the photolithographic technique. A structural and morphological characterization of the fabricated microfluidics chip, which was functionalized with a bienzyme containing cholesterol oxidase (ChOx) and cholesterol esterase (ChEt), was accomplished using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy.

Magnesium oxide grafted carbon nanotubes based impedimetric genosensor for biomedical application.

Nanostructured magnesium oxide (size<10nm) grafted carboxyl (COOH) functionalized multi-walled carbon nanotubes (nMgO-cMWCNTs) deposited electrophoretically onto indium tin oxide (ITO) coated glass electrode and have been utilized for Vibrio cholerae detection. Aminated 23 bases single stranded DNA (NH2-ssDNA) probe sequence (O1 gene) of V. cholerae has been covalently functionalized onto nMgO-cMWCNTs/ITO electrode surface using EDC-NHS chemistry.

Biocompatible nanostructured magnesium oxide-chitosan platform for genosensing application.

A novel organic-inorganic platform comprising of chitosan (CH) modified nanostructured magnesium oxide (nanoMgO) has been electrophoretically deposited on the indium-tin-oxide (ITO) substrate. The single stranded probe DNA (ssDNA) sequence of Vibrio cholerae has been covalently functionalized onto CH-nanoMgO/ITO surface. The cytotoxicity assay of nanoMgO particles, examined using human intestinal cell line (INT 407), reveals no significant cytotoxicity at the given doses in the range of 50-350 μg/mL.

A highly efficient microfluidic nano biochip based on nanostructured nickel oxide.

We present results of the studies relating to fabrication of a microfluidic biosensor chip based on nickel oxide nanorods (NRs-NiO) that is capable of directly measuring the concentration of total cholesterol in human blood through electrochemical detection. Using this chip we demonstrate, with high reliability and in a time efficient manner, the detection of cholesterol present in buffer solutions at clinically relevant concentrations. The microfluidic channel has been fabricated onto a nickel oxide nanorod-based electrode co-immobilized with cholesterol esterase (ChEt) and cholesterol oxidase (ChOx) that serves as the working electrode.

Synthesis of superparamagnetic bare Fe₃O₄ nanostructures and core/shell (Fe₃O₄/alginate) nanocomposites.

In this article we report about the synthesis of superparamagnetic bare Fe3O4 nanostructures and core/shell (Fe3O4/alginate) nanocomposites by simple low-temperature based method at pH values 5, 9, and 14. The structural morphology and magnetic behavior of Fe3O4 nanostructures and core/shell (Fe3O4/alginate) nanocomposites (Fe3O4/alg NCs) have been investigated by X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy (RS), ultraviolet-visible (UV-vis) spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and vibrating sample magnetometer (VSM). The particle size was calculated by TEM measurements and it turns out to be ∼10 nm and ∼14 nm for bare Fe3O4 nanoparticle and Fe3O4/alg NCs with core/shell structure, respectively.

Mediator free cholesterol biosensor based on self-assembled monolayer platform.

Self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) has been investigated for immobilization of bi-enzymes (ChOx and ChEt) towards development of enzyme biosensors for detection of free and total cholesterol. This enzyme immobilized SAM surface has been characterized by scanning electron microscopy and electrochemical measurements. The results of electrochemical response studies reveal fast enzymatic reaction in phosphate buffer saline solution without using any artificial mediator.

Fundamentals and application of ordered molecular assemblies to affinity biosensing.

Organization of biomolecules in two/three dimensional assemblies has recently aroused much interest in nanobiotechnology. In this context, the development of techniques for controlling spatial arrangement and orientation of the desired molecules to generate highly-ordered nanostructures in the form of a mono/multi layer is considered highly significant. The studies of monolayer films to date have focused on three distinct methods of preparation: (i) the Langmuir-Blodgett (LB) technique, involving the transfer of a monolayer assembled at the gas-liquid interface; (ii) self-assembly at the liquid-solid interface, based on spontaneous adsorption of desired molecules from a solution directly onto a solid surface; and (iii) Layer-by-layer (LBL) self-assembly at a liquid-solid interface, based on inter-layer electrostatic attractions for fabrication of multilayers.

A self assembled monolayer based microfluidic sensor for urea detection.

Urease (Urs) and glutamate dehydrogenase (GLDH) have been covalently co-immobilized onto a self-assembled monolayer (SAM) comprising of 10-carboxy-1-decanthiol (CDT) via EDC-NHS chemistry deposited onto one of the two patterned gold (Au) electrodes for estimation of urea using poly(dimethylsiloxane) based microfluidic channels (2 cm × 200 μm × 200 μm). The CDT/Au and Urs-GLDH/CDT/Au electrodes have been characterized using Fourier transform infrared (FTIR) spectroscopy, contact angle (CA), atomic force microscopy (AFM) and electrochemical cyclic voltammetry (CV) techniques. The electrochemical response measurement of a Urs-GLDH/CDT/Au bioelectrode obtained as a function of urea concentration using CV yield linearity as 10 to 100 mg dl(-1), detection limit as 9 mg dl(-1) and high sensitivity as 7.

Polyaniline Langmuir-Blodgett film based aptasensor for ochratoxin A detection.

Ochratoxin A (OTA) produced by Aspergillus Ochraceus and Penicillium verrucosum is a very dangerous toxin due to its toxic effects in human beings and its presence in a wide range of food products and cereals. A Langmuir-Blodgett (polyaniline (PANI)-stearic acid (SA)) film based highly sensitive and robust impedimetric aptasensor has been developed for ochratoxin A (OTA) detection. DNA Aptamer (Apt-DNA) specific to OTA has been covalently immobilized onto mixed Langmuir-Blodgett (LB) monolayer comprising of PANI-SA deposited onto indium tin-oxide (ITO) coated glass plates.

Recent advances in polyaniline based biosensors.

The present paper contains a detailed overview of recent advances relating to polyaniline (PANI) as a transducer material for biosensor applications. This conducting polymer provides enormous opportunities for binding biomolecules, tuning their bio-catalytic properties, rapid electron transfer and direct communication to produce a range of analytical signals and new analytical applications. Merging the specific nature of different biomolecules (enzymes, nucleic acids, antibodies, etc.

Electrophoretically deposited polyaniline nanotubes based film for cholesterol detection.

Polyaniline nanotube (PANI-NT) based films have been fabricated onto indium-tin-oxide (ITO) coated glass plates via electrophoretic technique. These PANI-NT/ITO electrodes have been utilized for covalent immobilization of cholesterol oxidase (ChOx) using glutaraldehyde (Glu) as cross-linker. Structural, morphological and electrochemical characterization of PANI-NT/ITO electrode and ChOx/Glu/PANI-NT/ITO bioelectrode have been done using FT-IR spectroscopy, SEM, electrochemical impedance spectroscopy and cyclic voltammetry techniques.

Self-assembled monolayer based impedimetric platform for food borne mycotoxin detection.

A self-assembled monolayer (SAM) of 11-amino-1-undecanethiol (AUT) has been fabricated onto a gold (Au) substrate to co-immobilize anti-ochratoxin-A antibodies (AO-IgGs) and bovine serum albumin (BSA) to detect food borne mycotoxin [i.e., ochratoxin-A (OTA)].

Preparation, characterization and application of polyaniline nanospheres to biosensing.

Polyaniline nanospheres (PANI-NS) prepared by morphological transformation of micelle polymerized camphorsulfonic acid (CSA) doped polyaniline nanotubes (PANI-NT) in the presence of ethylene glycol (EG) have been characterized by X-ray diffraction, atomic force microscopy, transmission electron microscopy, scanning electron microscopy, Fourier transform infra-red and UV-Visible spectroscopy. A PANI-NS (60-80 nm) film deposited onto an indium-tin-oxide (ITO) coated glass plate by the solution casting method has been utilized for covalent immobilization of biomolecules (cholesterol oxidase (ChOx)) viaN-ethyl-N'-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) chemistry for fabrication of a cholesterol biosensor. The ChOx/PANI-NS/ITO bioelectrode detects cholesterol in the concentration range of 25 to 500 mg dL(-1) with sensitivity of 1.

Low density lipoprotein detection based on antibody immobilized self-assembled monolayer: investigations of kinetic and thermodynamic properties.

Human plasma low density lipoprotein (LDL) immunosensor based on surface plasmon resonance (SPR) and quartz crystal microbalance (QCM) was fabricated by immobilizing antiapolipoprotein B (AAB) onto self-assembled monolayer (SAM) of 4-aminothiophenol (ATP). The AAB/ATP/Au immunosensor can detect LDL up to 0.252 microM (84 mg/dL) and 0.