Environment-friendly AgNWs/TiCT transparent conductive film based on natural fish gelatin for degradable electronics.

Recently, the electronic waste (E-waste) has become the most serious environmental trouble because of the iteration of electronic products. Transparent conductive films (TCFs) are the key component of flexible electronic devices, so the development of devices based on degradable TCFs has become an important way to alleviate the problem of E-waste. Gelatin, one of the most prevalent natural biomacromolecules, has drawn increasing attention due to its good film-forming ability, superior biocompatibility, excellent degradability, and commercial availability at a relatively low cost, but has few applications in flexible electronics.

Flexible nano-cloth-like Ag cluster@rGO with ultrahigh SERS sensitivity for capture-optimization-detection due to effective molecule-substrate interactions.

Surface-enhanced Raman scattering (SERS) is a rapid and promising detection technique for trace molecules. A central goal of research in this area is to achieve the highly sensitive detection of molecules built on a systematic understanding of enhancement mechanisms. Herein, we develop a Ag cluster@rGO composite nanostructure, which utilizes strong molecular adsorption to achieve ultrahigh SERS sensitivity.

A Silicone Resin Coating with Water-Repellency and Anti-Fouling Properties for Wood Protection.

The strong hygroscopicity of wood greatly shortens its service life. Here, a simple impregnation modification approach was used to construct superhydrophobic silicone resin coatings on wood surfaces. Briefly, with hydrofluorosilicone oil (HFSO), tetramethyl tetravinyl cyclotetrasiloxane (V), and hydrophobic SiO from industrial production as raw materials, superhydrophobic wood samples (water contact angle ~160.

Rapid fabrication of bionic pyrogallol-based self-adhesive hydrogel with mechanically tunable, self-healing, antibacterial, wound healing, and hemostatic properties.

Hydrogels are functional materials that are similar to human skin and have received much attention in recent years for biomedical applications. However, the preparation of nontoxic, highly adhesive, and antimicrobial hydrogels in an efficient way remains a great challenge. Inspired by adhesive mussel foot proteins (mfps) which consist of abundant catecholic amino acids and lysine (Lys) residues, gallic acid-modified ε-poly-L-lysine (EPL/GA) was synthesized, and an active functional monomer (AA-EPL/GA) was then created through a reaction with acrylic acid (AA).

Low-temperature nanowelding silver nanowire hybrid flexible transparent conductive film for green light OLED devices.

Flexible organic light emitting diodes (OLED) have attracted great attention in many applications. MXene based flexible transparent conductive films (TCFs) are the most promising next-generation electrodes for flexible electronics. Herein, the sandwich conductive structure of silver nanowires (AgNWs) network, new 2D nanosheets with excellent conductivity, hydrophilicity and mechanical flexibility and PEDOT:PSS contributes to a highly transparent and conductive hybrid electrode through a simple, scalable, low-cost spray method.

An Eco-Friendly Wood Adhesive Consisting of Soybean Protein and Cardanol-Based Epoxy for Wood Based Composites.

Formaldehyde-derived wood adhesives have dominated in woody composites production up to now, while facing a significant challenge in non-renewable raw materials and the formaldehyde emission. To solve these problems, an eco-friendly soybean protein-based wood adhesive was explored via the addition of renewable cardanol based epoxy (CBE) as cross-linking agent. The curing mechanism and viscosity of the adhesives were investigated and the bonding performance was evaluated with three-ply plywood.

An ultrasonication-aided self-assembly strategy toward a PTCDA/RGO film cathode for organic K-ion full batteries.

A free-standing PTCDA/RGO film was synthesized by an ultrasonication-aided self-assembly strategy to alleviate the solubility of PTCDA in organic electrolytes. The PTCDA/RGO-50% film cathode exhibits a high capacity of 135.1 mA h g at 0.

High-Porosity Lamellar Films Prepared by a Multistage Assembly Strategy for Efficient Photothermal Water Evaporation and Power Generation.

The frame structure combined with water- and heat-transfer capabilities fully satisfies the requirements of photothermal conversion materials in seawater evaporation applications. Meanwhile, it must integrate the characteristics of a high photothermal conversion rate, thermal management, and water transportation. Herein, lamellar porous films were successfully designed and synthesized by a simple ultrasonic-assisted vacuum filtration method.

A general electron donor-acceptor complex for photoactivation of arenes thianthrenation.

General photoactivation of electron donor-acceptor (EDA) complexes between arylsulfonium salts and 1,4-diazabicyclo[2.2.2]octane with visible light or natural sunlight was discovered.

Facile Fabrication of Fluorine-Free, Anti-Icing, and Multifunctional Superhydrophobic Surface on Wood Substrates.

Building superhydrophobic protective layers on the wood substrates is promising in terms of endowing them with multiple functions, including water-repellent, self-cleaning, anti-icing functions. In this study, multifunctional superhydrophobic wood was successfully fabricated by introducing SiO sol and superhydrophobic powder (PMHOS). The SiO sol was prepared using tetraethoxysilane as a precursor and ethanol was used as the dispersant.

Dimensional Optimization for ZnO-Based Mechano-ATRP with Extraordinary Activity.

Various piezoelectric nanomaterials were utilized in ultrasound-mediated atom transfer radical polymerization (ATRP), owing to their outstanding piezoelectric effect. However, the relationship between the morphology of those piezocatalysts and polymerization has not been clearly established. Herein, we employed different piezoelectric zinc oxide (ZnO) nanomaterials to achieve novel mechano-induced ATRP (mechano-ATRP).

Ultrafast Visible-Light-Induced ATRP in Aqueous Media with Carbon Quantum Dots as the Catalyst and Its Application for 3D Printing.

Photoinduced atom transfer radical polymerization (ATRP) has been proved to be a versatile technique for polymer network formation. However, the slow polymerization rates of typical ATRP limited its application in the field of additive manufacturing (3D printing). In this work, we introduced carbon quantum dots (CQDs) for the first time to the ATRP in aqueous media and developed an ultrafast visible-light-induced polymerization system.

Biogenic Synthesis of Cu-Doped ZnO Photocatalyst for the Removal of Organic Dye.

The Cu-doped ZnO photocatalysts were prepared with a green and coprecipitation approach by using water hyacinth () aquatic plant extract. In the preparation process, different amount of copper precursors such as 1, 2, 3, 4, and 5% of molar ratio were added to zinc nitrate precursors and abbreviated as Cu-ZnO (1%), Cu-ZnO (2%), Cu-ZnO (3%), Cu-ZnO (4%), and Cu-ZnO (5%), respectively. The characterization of the obtained samples was carried out, and the removal of the methylene blue (MB) dye was examined.

Simple Full-Spectrum Heterogeneous Photocatalyst for Photo-induced Atom Transfer Radical Polymerization (ATRP) under UV/vis/NIR and its Application for the Preparation of Dual Mode Curing Injectable Photoluminescence Hydrogel.

The utilizing light with broadband range has attracted lots of research interest for the photo induced reversible-deactivation radical polymerization (RDRP). However, it is still a challenge for a single catalyst to simultaneously respond to various lights with highly varied wavelengths. Here, we proposed a simple strategy for the preparation of a heterogeneous photocatalyst suitable for photo induced atom transfer radical polymerization (photoATRP) under full spectrum (from UV/vis light to NIR), by combining pyridine nitrogen doped carbon dots (N-CDs) and upconversion nanoparticles (UCNPs).

Visible light-driven photocatalytic activity of CuO/ZnO/Kaolinite-based composite catalyst for the degradation of organic pollutant.

Herein, we design to synthesize a novel CuO/ZnO/kaolinite composite catalyst by co-precipitation method. The synthesized composite catalysts were labeled as 5CZK, 10CZK, 15CZK, and 20CZK which represent 5, 10, 15, and 20% of CuO, respectively, on ZnO/kaolinite. The photocatalyst samples were characterized with different instruments.

Production of Hydroxymethylfurfural Derivatives From Furfural Derivatives Hydroxymethylation.

Hydroxymethylfurfural (HMF) derivatives such as 2,5-bis(hydroxymethyl)furan (BHMF) and furandicarboxylic acid (FDCA) are promising alternative of fossil-based diols and dicarboxylic acids for synthesis of polyesters such as polyethylene terephthalate (PET). However, high cost for preparing HMF from biomass discourages the commercialization of HMF-derived polyesters. Since producing furfural (FUR) from five-carbon sugars (e.

Adhesive, Antibacterial, Conductive, Anti-UV, Self-Healing, and Tough Collagen-Based Hydrogels from a Pyrogallol-Ag Self-Catalysis System.

Recently, versatile hydrogels with multifunctionality have been widely developed with emerging applications as wearable and implantable devices. In this work, we reported novel versatile hydrogels by self-catalyzing the gelation of an interpenetrating polymer network consisting of acrylic acid (AA) monomers and GA-modified collagen (GCOL) in situ decorated silver nanoparticles (AgNPs). The resultant hydrogel, namely AgNP@GCOL/PAA, has many desirable features, including good mechanical properties (such as 123 kPa, 916%, and 1961 J m for the fracture stress, strain and tearing energy) that match with those of animal skin, excellent self-healing performance, favorable conductivity and strain sensitivity as a flexible biosensor, and excellent antibacterial and anti-UV properties, as well as the strong adhesiveness on skin.

Molecular Dynamics Simulation of the Soret Effect on Two Binary Liquid Solutions with Equimolar -Alkane Mixtures.

Molecular dynamics is employed to simulate the Soret effect on two binary liquid solutions with equimolar mixtures: normal pentane (-pentane, nC-5) and normal heptane (-heptane, nC-7) molecules plus normal decane (-decane, nC-10) and normal pentane molecules. Moreover, two coarse-grained force field (the CG-FF) potentials, which may depict inter-/intramolecular interactions fairly well among -alkane molecules, are developed to fulfill such investigations. In addition, thermal diffusion for the mass fraction of each of these -alkane molecules is simulated under an effect of a weak thermal gradient (temperature difference) exerting on solution systems from their hot to cold boundary sides.

Graphene Oxide Functionalized Cottonseed-Lignin Resin with Enhanced Wet Adhesion for Woody Composites Application.

With rising interior air pollution, health, and food shortage concerns, wood adhesives derived from non-food sustainable materials have therefore attracted considerable attention. Here we developed an eco-friendly cottonseed-lignin adhesive consisting of non-food defatted cottonseed flour (DCF), alkali lignin (AL), and graphene oxide (GO). The cation-π interaction, and hydrogen and covalent bonds between AL@GO and DCF collectively enhanced the cross-linking structure of the cured cottonseed-lignin adhesive, based on the Fourier-transform infrared spectroscopy, thermogravimetric analyses, scanning electron microscopy, and sol-gel tests.

Using poly(N-Vinylcaprolactam) to Improve the Enzymatic Hydrolysis Efficiency of Phenylsulfonic Acid-Pretreated Bamboo.

Chemical pretreatment followed by enzymatic hydrolysis has been regarded as a viable way to produce fermentable sugars. Phenylsulfonic acid (PSA) pretreatment could efficiently fractionate the non-cellulosic components (hemicelluloses and lignin) from bamboo and result in increased cellulose accessibility that was 10 times that of untreated bamboo. However, deposited lignin could trigger non-productive adsorption to enzymes, which therefore significantly decreased the enzymatic hydrolysis efficiency of PSA-pretreated bamboo substrates.

Preparation of Electrode Materials Based on Carbon Cloth via Hydrothermal Method and Their Application in Supercapacitors.

Supercapacitors have the unique advantages of high power density, fast charge and discharge rates, long cycle life, high safety, and reliability, and are increasingly being used for applications including automobiles, rail transit, communication equipment, digital electronics, and aerospace equipment. The supercapacitor industry is currently in a stage of rapid development; great breakthroughs have also been made in improving the performance of supercapacitors and the expansion of their application. Electrode technology is the core of supercapacitors.

Bioinspired Cellulase-Mimetic Solid Acid Catalysts for Cellulose Hydrolysis.

Glucose produced by catalytic hydrolysis of cellulose is an important platform molecule for producing a variety of potential biobased fuels and chemicals. Catalysts such as mineral acids and enzymes have been intensively studied for cellulose hydrolysis. However, mineral acids show serious limitations concerning equipment corrosion, wastewater treatment and recyclability while enzymes have the issues such as high cost and thermal stability.

Optimized strategies for (BiO)CO and its application in the environment.

Photocatalysis is a new type of technology, which has been developed rapidly for solving environmental problems such as wastewater or air pollutants in recent years. Also, the effective performance and non-secondary pollution of photocatalytic technology attract much attention from researchers. As a "sillén" phase oxide, the (BiO)CO (BOC) is a great potential photocatalyst attributing to composed of alternate BiO and CO layers, which is a benefit for transportation of electrons.

General Route to Colloidal Nanocrystal Clusters with Precise Hierarchical Control via Star-like Nanoreactors.

A colloidal nanocrystal cluster (CNC) is a hierarchical nanostructure formed by clustering several nanocrystals into one nano-ensemble, which may exhibit unique optical or catalytic properties different from individual nanocrystals owing to the mutual interactions among neighboring component nanocrystals. However, there is still no universal synthetic route that could be applicable to diverse material compositions with precisely controlled hierarchical structures (i.e.

Tendon-inspired fibers from liquid crystalline collagen as the pre-oriented bioink.

Nature provides rich bionic resources for the construction of advanced materials with excellent mechanical properties. In this work, inspired by animal tendons, a bionic collagen fiber was developed using collagen liquid crystals as the pre-oriented bioink. The texture of liquid crystalline collagen observed from polarized optical microscopy (POM) showed the specific molecular pre-orientation.