Application of Adipose Extracellular Matrix and Reduced Graphene Oxide Nanocomposites for Spinal Cord Injury Repair.

Graphene-based materials (GBMs) hold strong promise to restore the spinal cord microenvironment and promote functional recovery after spinal cord injury (SCI). Nanocomposites consisting of reduced graphene oxide (rGO) and adipose tissue-derived extracellular matrix (adECM) are known to promote neuronal growth in vitro and to evoke a biocompatible response in vivo when implanted on top of the intact spinal cord. In this study, pristine adECM and adECM-rGO nanocomposites are implanted directly after hemisection SCI in rats.

Potential advantage of invasive estuarine worms over native species under exposure to relevant concentrations of graphene oxide: Behavioral and biochemical insights.

Technological development using graphene oxide (GO) has increased in the last years, leading to the release of this contaminant to final sinks, such as estuaries. Due to their potential to flocculate and deposit when interacting with high ionic strength media, GO poses a threat, especially to benthic organisms like polychaetes. In addition to chemical contamination, estuaries also face a severe threat from invasive species, which can cause irreversible damage to ecosystems.

Analysis of single vehicle noise emissions in the frequency domain for two different motorizations.

Environmental noise, primarily attributed to the road transportation system, poses a significant challenge in Europe, impacting the quality of life for millions. Therefore, a thorough characterization of noise emissions from road transportation sources is needed to stem this problem. This investigation aims to fill a gap in the literature regarding single-vehicle noise emissions in the frequency domain.

Experimental and Numerical Insights into the Multi-Impact Response of Cork Agglomerates.

Due to their extraordinary qualities, including fire resistance, excellent crashworthiness, low thermal conductivity, permeability, non-toxicity, and reduced density, cellular materials have found extensive use in various engineering applications. This study uses a finite element analysis (FEA) to model the dynamic compressive behaviour of agglomerated cork to ascertain how its material density and stress relaxation behaviour are related. Adding the Mullins effect into the constitutive modelling of impact tests, its rebound phase and subsequent second impact were further examined and simulated.

Assessing head injury risks in electric scooter accidents: A multi-body simulation study with insights into sex differences.

E-scooters have become increasingly popular for short-distance travel in urban areas, but this rise in usage also brings about an increased risk of accidents. Studies have shown that approximately 40% of electric scooter accident victims admitted to hospitals suffer head injuries. Therefore, it is crucial to implement safety measures and improve safety systems and equipment to mitigate these risks.

Assessing the impact of different urban morphology scenarios on air pollutant emissions distribution.

As urban areas grow with the increase in population, so do the problems associated with these areas, such as an increase in atmospheric emissions. Since urban morphology has an effect on the environment, it is necessary to design future urban morphologies to accommodate the expected growth and mitigate the associated problems. By employing an emission distribution methodology based on the relationship between land use and emission activity sectors, including transport and road traffic emissions modelling (with PTV-VISUM and TREM, respectively), this study aims to identify urban morphologies that have the potential to minimize atmospheric emissions for future multi-core regions.

Accuracy and efficiency of finite element head models: The role of finite element formulation and material laws.

Traumatic brain injury is a significant problem worldwide. In the United States of America, around 1.7 million cases are documented annually, displaying the need for a deeper understanding of the effects on the human brain.

Advances in Microfluidic-Based Core@Shell Nanoparticles Fabrication for Cancer Applications.

Current research in cancer therapy focuses on personalized therapies, through nanotechnology-based targeted drug delivery systems. Particularly, controlled drug release with nanoparticles (NPs) can be designed to safely transport various active agents, optimizing delivery to specific organs and tumors, minimizing side effects. The use of microfluidics (MFs) in this field has stood out against conventional methods by allowing precise control over parameters like size, structure, composition, and mechanical/biological properties of nanoscale carriers.

Biocompatible adipose extracellular matrix and reduced graphene oxide nanocomposite for tissue engineering applications.

Despite the immense need for effective treatment of spinal cord injury (SCI), no successful repair strategy has yet been clinically implemented. Multifunctional biomaterials, based on porcine adipose tissue-derived extracellular matrix (adECM) and reduced graphene oxide (rGO), were recently shown to stimulate neural stem cell growth and differentiation. Nevertheless, their functional performance in clinically more relevant conditions remains largely unknown.

Shear thickening fluid (STF) in engineering applications and the potential of cork in STF-based composites.

Shear thickening fluids (STFs) are a unique type of fluids that can quickly transform into a solid-like state when subjected to forces (rate dependent). These fluids are created by dispersing micro and nanoparticles within a medium. When the force is removed, they return to their original liquid state.

Coupling Different Road Traffic Noise Models with a Multilinear Regressive Model: A Measurements-Independent Technique for Urban Road Traffic Noise Prediction.

Road traffic noise is a severe environmental hazard, to which a growing number of dwellers are exposed in urban areas. The possibility to accurately assess traffic noise levels in a given area is thus, nowadays, quite important and, on many occasions, compelled by law. Such a procedure can be performed by measurements or by applying predictive Road Traffic Noise Models (RTNMs).

3D-Printed Collagen-Nanocellulose Hybrid Bioscaffolds with Tailored Properties for Tissue Engineering Applications.

Hybrid collagen (Coll) bioscaffolds have emerged as a promising solution for tissue engineering (TE) and regenerative medicine. These innovative bioscaffolds combine the beneficial properties of Coll, an important structural protein of the extracellular matrix, with various other biomaterials to create platforms for long-term cell growth and tissue formation. The integration or cross-linking of Coll with other biomaterials increases mechanical strength and stability and introduces tailored biochemical and physical factors that mimic the natural tissue microenvironment.

Synergistic Remediation of Organic Dye by Titanium Dioxide/Reduced Graphene Oxide Nanocomposite.

In this work, nanocomposites based on titanium dioxide and reduced graphene oxide (TiO@rGO) with different weight percentages of rGO (4, 8, and 16 wt%) were prepared by the hydrothermal/solvothermal synthesis method and thermally treated at 300 °C. The prepared nanocomposites were explored for the removal of methylene blue dye (MB) in the presence of simulated solar illumination as well as natural sunlight. The structural, morphological, chemical, and optical properties of the as-synthesized TiO@rGO nanocomposites were characterized.

Syringe irrigation in confluent canals: A sequential computational fluid dynamics assessment.

This study aims to assess the influence of root canal preparation, irrigation needle design and its placement depth in the irrigation flow of confluent canals during syringe irrigation. A mandibular molar presenting two confluent canals in its mesial root was sequentially prepared and scanned by micro-computed tomography after mechanical preparation up to ProTaper Next system sizes X2 (25/.06v), X3 (30/.

On the Structural, Thermal, Micromechanical and Tribological Characterizations of Cu-Filled Acrylonitrile Butadiene Styrene Micro-Composites.

The purpose of this work was to investigate the structural, thermal, micromechanical and tribological properties of novel polymer/metal composite materials for bearing applications. Copper (Cu)-filled Acrylonitrile Butadiene Styrene (ABS) composites were mixed in a laboratory scale by an internal mixer with two blade impellers, and then injection-molded. Neat ABS, ABS+5wt% Cu, ABS+10wt% Cu, and ABS+15wt% Cu were the four materials that were tested.

Numerical and physical modeling of breast cancer based on image fusion and artificial intelligence.

Purpose: The key problem raised in the paper is the change in the position of the breast tumor due to magnetic resonance imaging examinations in the abdominal position relative to the supine position during the surgical procedure. Changing the position of the patient leads to significant deformation of the breast, which leads to the inability to indicate the location of the neoplastic lesion correctly.

Methods: This study outlines a methodological process for treating cancer patients.

Development, validation and a case study: The female finite element head model (FeFEHM).

Background And Objective: Traumatic brain injuries are one of the leading causes of death and disability in the world. To better understand the interactions and forces applied in different constituents of the human head, several finite element head models have been developed throughout the years, for offering a good cost-effective and ethical approach compared to experimental tests. Once validated, the female finite element head model (FeFEHM) will allow a better understanding of injury mechanisms resulting in neuronal damage, which can later evolve into neurodegenerative diseases.

Assessment of the Impact of Superficial Contamination and Thermo-Oxidative Degradation on the Properties of Post-Consumer Recycled Polypropylene.

Single-use plastics are a matter of convenience in everyday life, with the majority allocated to packaging production. However, it comes with a high environmental price as its mass recycling is challenging due to the heterogeneity of composition, contaminations of different kinds, and degradation caused by service and processing. This study aims to ascertain the impact of removing contaminants from post-consumer recycled polypropylene (rPP) on its degradation and properties by implementing a systematic approach for decontamination by washing.

Biomechanics of Traumatic Head and Neck Injuries on Women: A State-of-the-Art Review and Future Directions.

The biomechanics of traumatic injuries of the human body as a consequence of road crashes, falling, contact sports, and military environments have been studied for decades. In particular, traumatic brain injury (TBI), the so-called "silent epidemic", is the traumatic insult responsible for the greatest percentage of death and disability, justifying the relevance of this research topic. Despite its great importance, only recently have research groups started to seriously consider the sex differences regarding the morphology and physiology of women, which differs from men and may result in a specific outcome for a given traumatic event.

Is Graphene Shortening the Path toward Spinal Cord Regeneration?

Along with the development of the next generation of biomedical platforms, the inclusion of graphene-based materials (GBMs) into therapeutics for spinal cord injury (SCI) has potential to nourish topmost neuroprotective and neuroregenerative strategies for enhancing neural structural and physiological recovery. In the context of SCI, contemplated as one of the most convoluted challenges of modern medicine, this review first provides an overview of its characteristics and pathophysiological features. Then, the most relevant ongoing clinical trials targeting SCI, including pharmaceutical, robotics/neuromodulation, and scaffolding approaches, are introduced and discussed in sequence with the most important insights brought by GBMs into each particular topic.

Multifunctional Smart Bone Implants: Fiction or Future?-A New Perspective.

Implantable medical devices have been developed to provide multifunctional ability to numerous bioapplications. In the scope of orthopaedics, four methodologies were already proposed to design implant technologies: non-instrumented passive implants, non-instrumented active implants, instrumented passive implants and instrumented active implants. Even though bone replacements are among the most performed surgeries worldwide, implant failure rates can still exceed 10%.

Optimization to Assist Design and Analysis of Temperature Control Strategies for Injection Molding-A Review.

Injection molding (IM) is the most widespread and economical way to obtain high-quality plastic components. The process depends, however, to a great extent, on the quality and efficiency of the injection molding tools. Given the nature of the IM process, the temperature control system (TCS), its design, and its efficiency are of utmost importance for achieving the highest possible quality of plastic parts in the shortest possible time.

Multidimensional assessment of anxiety through the State-Trait Inventory for Cognitive and Somatic Anxiety (STICSA): From dimensionality to response prediction across emotional contexts.

The assessment of mal-adaptive anxiety is crucial, considering the associated personal, economic, and societal burden. The State-Trait Inventory for Cognitive and Somatic Anxiety (STICSA) is a self-report instrument developed to provide multidimensional anxiety assessment in four dimensions: trait-cognitive, trait-somatic, state-cognitive and state-somatic. This research aimed to extend STICSA's psychometric studies through the assessment of its dimensionality, reliability, measurement invariance and nomological validity in the Portuguese population.

Effects of graphene oxide nanosheets in the polychaete Hediste diversicolor: Behavioural, physiological and biochemical responses.

Numerous applications exist for graphene-based materials, such as graphene oxide (GO) nanosheets. Increased concentrations of GO nanosheets in the environment have the potential to have a large negative effect on the aquatic environment, with consequences for benthic organisms, such as polychaetes. The polychaete Hediste diversicolor mobilises the sediments, hence altering the availability of contaminants and the nutrients biogeochemical cycle.

Computer-Aided Reengineering towards Plastic Part Failure Minimization.

The work reported here intends to identify and mitigate the causes for failure in a plastic faucet holder, a part of an integral float faucet with a well-documented history of fracture occurrence. A methodology for the identification of hidden internal defects in plastic parts and the elaboration of the required corrective actions towards quality improvement is, therefore, presented. Firstly, part defects were identified via injection moulding process numerical simulation.