Rheological investigation on hyaluronan-fibrinogen interaction.

This paper concerns the interaction between hyaluronan and fibrinogen as model for protein-polysaccharide interaction. From rheological investigation, it is shown that a 3D physical network is promoted by mixing the two components; the mechanism is attributed to electrostatic interactions. The influences of the molecular weight and of the hyaluronan concentration are examined; the loose interaction obtained for addition of small amount of soluble protein induces a non-Newtonian behaviour which may be in direct relation with the behaviour observed previously on synovial fluids.

Development of a sialic acid-containing hydrogel of poly[N-(2-hydroxypropyl) methacrylamide]: characterization and implantation study.

This study describes the preparation and the characterization of poly[ N-(2-hydroxypropyl methacrylamide)] hydrogel with bulk-modified saccharidic portion of ganglioside GM 3 (Neu5Ac-alpha2,3-Gal-beta1,4-Glc). The 3'-sialyllactose is a bioactive epitope recognized by many cell surface receptors on viruses, bacteria, and human cells such as growth factor receptors. Acrylated 3'-sialyllactose was synthesized and incorporated into the macromolecular network of hydrogels by free radical cross-linking copolymerization.

Multilayer assembly of hyaluronic acid/poly(allylamine): control of the buildup for the production of hollow capsules.

The objective of this work was to investigate the formation of hollow microcapsules composed of hyaluronic acid (HA) and poly(allylamine) (PAH) by layer-by-layer adsorption on CaCO 3 microparticles and subsequent core removal by addition of chelating agents for calcium ions. We found that the molecular weight of HA as well as the HA solution concentration used during deposition are crucial parameters influencing the multilayer structure. Whereas the effect of molecular weight of HA was mainly attributed to the porous structure of the template which allows penetration of polyelectrolytes when their size is below the maximum pore size of the template ( approximately 60 nm), that of the concentration of the HA solution was related to the intrinsic properties of the polysaccharide.

Genetic engineering of Escherichia coli for the economical production of sialylated oligosaccharides.

We have previously described a microbiological process for the conversion of lactose into 3'sialyllactose and other ganglioside sugars by living Escherichia coli cells expressing the appropriate recombinant glycosyltransferase genes. In this system the activated sialic acid donor (CMP-Neu5Ac) was generated from exogenous sialic acid, which was transported into the cells by the permease NanT. Since sialic acid is an expensive compound, a more economical process has now been developed by genetically engineering E.

New chromogenic substrates for feruloyl esterases.

Indolyl and nitrophenyl 5-O-hydroxycinnamoyl-alpha-L-arabinofuranosides were prepared by chemo-enzymatic syntheses. These probes were designed as substrates to be used in assays of feruloyl esterase activity (EC 3.1.

Tracing cellulose elements adsorbed on composite cellulose biomaterials by a new labeling method.

In view of tracing the fate of cellulose fine elements added to a suspension of cellulose fibers, a novel method for specific labeling of polysaccharides in a composite material was developed. The purpose was to visualize a given cellulose material within a cellulose mixture. The method consists of generating aldehyde groups in the chain by mild periodic acid oxidation followed by biotinylation of the carbonyls.

The shape and size distribution of crystalline nanoparticles prepared by acid hydrolysis of native cellulose.

The shape and size distribution of crystalline nanoparticles resulting from the sulfuric acid hydrolysis of cellulose from cotton, Avicel, and tunicate were investigated using transmission electron microscopy (TEM) and atomic force microscopy (AFM) as well as small- and wide-angle X-ray scattering (SAXS and WAXS). Images of negatively stained and cryo-TEM specimens showed that the majority of cellulose particles were flat objects constituted by elementary crystallites whose lateral adhesion was resistant against hydrolysis and sonication treatments. Moreover, tunicin whiskers were described as twisted ribbons with an estimated pitch of 2.

Synthesis of a library of allyl alpha-L-arabinofuranosyl-alpha- or beta-D-xylopyranosides; route to higher oligomers.

Six isomeric disaccharides allyl 2,3,5-tri-O-benzoyl-alpha-l-arabinofuranosyl-alpha-d-xylopyranosides and beta-d-xylopyranosides were synthetized by the stereoselective glycosylation of pure allyl alpha- or beta-d-xylopyranosides with 1-O-acetyl-2,3,5-tri-O-benzoyl-l-arabinofuranose as donor, catalyzed with BF(3).Et(2)O in DCM. Regio- and stereoselective glycosylation with excess of donor furnished almost exclusively the trisaccharides allyl 2,3-di-O-(2,3,5-tri-O-benzoyl-alpha-l-arabinofuranosyl)-alpha- or beta-d-xylopyranosides.

Mannosylated poly(ethylene oxide)-b-poly(epsilon-caprolactone) diblock copolymers: synthesis, characterization, and interaction with a bacterial lectin.

A novel bioeliminable amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) diblock copolymer end-capped by a mannose residue was synthesized by sequential controlled polymerization of ethylene oxide and epsilon-caprolactone, followed by the coupling of a reactive mannose derivative to the PEO chain end. The anionic polymerization of ethylene oxide was first initiated by potassium 2-dimethylaminoethanolate. The ring-opening polymerization of epsilon-caprolactone was then initiated by the omega-hydroxy end-group of PEO previously converted into an Al alkoxide.

Solid-state 13C NMR study of na-cellulose complexes.

The interaction of microcrystalline cellulose from cotton and aqueous sodium hydroxide was investigated by 13C NMR solid-state spectroscopy as a function of temperature and sodium hydroxide concentration. When the concentration of NaOH was increased, the initial cellulose spectrum was replaced successively by that of Na-cellulose I followed by that of Na-cellulose II. In Na-cellulose I, each carbon atom occurred as a singlet, thus implying that one glucosyl moiety was the independent magnetic residue in the structure of this allomorph.

Single crystals of V-amylose complexed with alpha-naphthol.

Lamellar square single crystals of V-amylose were obtained by adding alpha-naphthol to metastable dilute aqueous solutions of synthetic amylose chains with an average degree of polymerization of 100. The morphology and structure of the crystals were studied using low-dose transmission electron microscopy including high-resolution imaging, as well as electron and X-ray diffraction. The crystals are crystallized in a tetragonal P4(1)2(1)2 or P4(3)2(1)2 space group with unit cell parameters, calculated from X-ray diffraction data, a = b = 2.

The xyloglucan-cellulose assembly at the atomic scale.

The assembly of cell wall components, cellulose and xyloglucan (XG), was investigated at the atomistic scale using molecular dynamics simulations. A molecular model of a cellulose crystal corresponding to the allomorph Ibeta and exhibiting a flexible complex external morphology was employed to mimic the cellulose microfibril. The xyloglucan molecules considered were the three typical basic repeat units, differing only in the size of one of the lateral chain.

Conformational analysis of xylan chains.

The present study provides a theoretical description of the different levels of structural organization that characterize the xylan polysaccharide in its native and hydrophobic lauroyl esterified forms. The goal of this study was to ascertain the role played by the hydroxyl or lauroyl side groups on the conformational flexibility of the xylan chain backbone. The results reported provide a detailed description of the low-energy conformers of the dimer segments, a complete characterization of the helical structures, an insight into the disordered state of the polysaccharide chains and an estimation of the cohesion of the amorphous solids.

New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: effect of surface and dispersion characteristics.

New nanocomposite films were prepared with atactic polypropylene as the matrix and either of three types of cellulose whiskers, with various surface and dispersion characteristics, as the reinforcing phase: aggregated without surface modification, aggregated and grafted with maleated polypropylene or individualized and finely dispersed with a surfactant. Films obtained by solvent casting from toluene were investigated by means of scanning electron microscopy, dynamic mechanical analysis, and tensile testing. In the linear region, the mechanical properties above the glass-rubber transition were found to be drastically enhanced for the nanocomposites as compared to the neat polypropylene matrix.

Electrochemical detection of Arachis hypogaea (peanut) agglutinin binding to monovalent and clustered lactosyl motifs immobilized on a polypyrrole film.

Direct detection of peanut agglutinin/lactose interactions was realized by an electrochemical approach based on a polypyrrole coated electrode displaying pendant carbohydrates.

Chemoenzymatic synthesis of 6omega -modified maltooligosaccharides from cyclodextrin derivatives.

Regioselectively substituted maltooligosaccharides were prepared by enzymatic transformation of modified cyclodextrins by using simultaneously two different enzymes: cyclodextrin glucanotransferase (CGTase) and amyloglucosidase. Oligosaccharides were obtained in very good yields and their structures were identified by 1D and 2D NMR spectroscopy. These results provided new information about the specificity of the catalytic sites of CGTase and amyloglucosidase.

Theoretical and experimental studies on the adsorption of aromatic compounds onto cellulose.

The adsorption of several aromatic compounds over microcrystalline cellulose was studied by molecular modeling and experimentally using gas chromatography. Experimental adsorption enthalpies were obtained from an equation based on Clausius-Clapeyron formalism and the temperature dependence of retention volume at infinite dilution. Four different cellulose surfaces (three crystalline (110, 100, and 010) and one amorphous) were modeled.

Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field.

There are numerous examples where animals or plants synthesize extracellular high-performance skeletal biocomposites consisting of a matrix reinforced by fibrous biopolymers. Cellulose, the world's most abundant natural, renewable, biodegradable polymer, is a classical example of these reinforcing elements, which occur as whisker-like microfibrils that are biosynthesized and deposited in a continuous fashion. In many cases, this mode of biogenesis leads to crystalline microfibrils that are almost defect-free, with the consequence of axial physical properties approaching those of perfect crystals.

Surface chemical modification of waxy maize starch nanocrystals.

The surface of waxy maize starch nanocrystals obtained from sulfuric acid hydrolysis of native waxy maize starch granules was chemically modified using two different reagents, namely, alkenyl succinic anhydride and phenyl isocyanate. The occurrence of chemical modification was evaluated by FTIR and X-ray photoelectron spectroscopies. Contact angle measurements from which the surface energy of the materials under investigation was deduced showed that chemical modification led to more hydrophobic particles.

Novel oligosaccharides isolated from Fusarium oxysporum L. rapidly induce PAL activity in Rubus cells.

Activation of the phenolic pathway is known to be part of a defense response against cell wall-derived elicitors from pathogens. Many examples of a defense response by increasing the synthesis of phenolic compound against the elicitor were demonstrated in the past, but the elicitor structure has so far been poorly characterized. Our results indicate that a disaccharide fraction containing the following structure: alpha-D-mannopyranosyl (1-->2)alpha/beta-D-glucopyranosyl and alpha-D-mannopyranosyl (1-->x) inositol, isolated from Fusarium oxysporum L.

Chemoenzymatic synthesis of branched oligo- and polysaccharides as potential substrates for starch active enzymes.

Oligo- and polysaccharides embodying the alpha-maltotriosyl-6(II)-maltotetraosyl structure were readily synthesized by transglycosylation of maltosyl fluoride onto panose and pullulan catalysed by the bacterial transglycosylase cyclodextrin glycosyltransferase (CGTase). The two products obtained proved useful for increasing the knowledge of substrate binding and processing at the active site of barley limit dextrinase that is involved in the metabolism of amylopectin by acting upon its branch points.

Arabinan-cellulose composite in Opuntia ficus-indica prickly pear spines.

The ultrastructure of the spines decorating the cladodes of the cactus Opuntia ficus-indica was investigated by optical microscopy, scanning and transmission electron microscopy, wide angle X-ray, and solid state 13C NMR analyses. Each spine consisted of a compact parallel arrangement of slender cellulosic fibers (0.4 mm in length and 6-10 microm in diameter) with small lumens.

Crab shell chitin whiskers reinforced natural rubber nanocomposites. 3. Effect of chemical modification of chitin whiskers.

The purpose of this study was to chemically modify the surface of chitin whiskers and to investigate the effect of the incorporation of these modified whiskers into a natural rubber (NR) matrix on the properties of the ensuing nanocomposite. Different chemical coupling agents were tested, namely, phenyl isocyanate (PI), alkenyl succinic anhydride (ASA) (Accosize 18 from American Cyanamid), and 3-isopropenyl-alpha,alpha'-dimethylbenzyl isocyanate (TMI). The extent of chemical modification was evaluated by Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), and surface energy analysis.

Synthesis of complex oligosaccharides by using a mutated (1,3)-beta-D-glucan endohydrolase from barley.

Complex oligosaccharides with newly formed (1,3)-beta-glycosidic linkages were obtained in good to excellent yields when substituted or unsubstituted alpha-laminaribiosyl fluorides, acting as donors, were condensed onto mono- and disaccharide beta-D-hexopyranoside acceptors by using a (1,3)-beta-D-glycosynthase. These linear and branched (1,3)-beta-linked oligosaccharides could prove to be important in a range of medical, pharmaceutical, and agricultural applications. Furthermore, the observation that the (1,3)-beta-D-glucan glycosynthase accommodates (1,3)-, (1,4),- and (1,6)-beta-oligosaccharides in its acceptor subsites suggests novel, yet unexpected physiological roles for the wild type (1,3)-beta-D-glucan endohydrolase from higher plants.