The Effect of Height Error on Performance of Propagation Phase-Based Metalens.

Metalenses, as a new type of planar optical device with flexible design, play an important role in miniaturized and integrated optical devices. Propagation phase-based metalenses, known for their low loss and extensive design flexibility, are widely utilized in optical imaging and optical communication. However, fabrication errors introduced by thin-film deposition and etching processes inevitably result in variations in the height of the metalens structure, leading to the fabricated devices not performing as expected.

High-Performance, Easy-to-Fabricate, Nanocomposite Heater for Life Sciences and Biomedical Applications.

Microheaters are used in several applications, including medical diagnostics, synthesis, environmental monitoring, and actuation. Conventional microheaters rely on thin-film electrodes microfabricated in a clean-room environment. However, low-cost alternatives based on conductive paste electrodes fabricated using printing techniques have started to emerge over the years.

Application of the Industrial Byproduct Gypsum in Building Materials: A Review.

The industrial byproduct gypsum is a general term for byproducts discharged from industrial production with calcium sulfate as the main ingredient. Due to the high number of impurities and production volume, the industrial byproduct gypsum is underutilized, leading to serious environmental problems. At present, only desulfurization gypsum and phosphogypsum have been partially utilized in cementitious materials, cement retarders, etc.

Debulking of the Femoral Stem in a Primary Total Hip Joint Replacement: A Novel Method to Reduce Stress Shielding.

In current-generation designs of total primary hip joint replacement, the prostheses are fabricated from alloys. The modulus of elasticity of the alloy is substantially higher than that of the surrounding bone. This discrepancy plays a role in a phenomenon known as stress shielding, in which the bone bears a reduced proportion of the applied load.

A Novel Viscoelastic Deformation Mechanism Uncovered during Vickers Hardness Study of Bone.

This study investigates the viscoelastic deformation mechanisms of bone as a response to Vickers hardness indentation. We utilized advanced high-resolution scanning electron microscopy (SEM) to investigate a distinct deformation pattern that originates from the indentation site within the bone matrix. The focus of our research was to analyze a unique deformation mechanism observed in bone tissue, which has been colloquially termed as "screw-like" due to its resemblance to a screw thread when viewed under an optical microscope.

Expression of concern: Facile route to synthesize FeO@acacia-SOH nanocomposite as a heterogeneous magnetic system for catalytic applications.

Expression of concern for 'Facile route to synthesize FeO@acacia-SOH nanocomposite as a heterogeneous magnetic system for catalytic applications' by Reza Taheri-Ledari , , 2020, , 40055-40067, https://doi.org/10.1039/D0RA07986C.

A New Strategy for the High-Throughput Characterization of Materials' Mechanical Homogeneity Based on the Effect of Isostatic Pressing on Surface Microstrain.

A new strategy for the high-throughput characterization of the mechanical homogeneity of metallurgical materials is proposed. Based on the principle of hydrostatic transmission and the synergistic analysis of the composition, microstructure, defects, and surface profile of the chosen material, the microstrain characteristics and changes in surface roughness after isostatic pressing were analyzed. After isostatic pressing, two types of microstrains were produced: low microstrain (surface smoothening with decreasing roughness) and large microstrain (surface roughening with increasing roughness).

High-efficiency recovery of valuable metals from spent lithium-ion batteries: Optimization of SO pressure leaching and selective extraction of trace impurities.

The recovery of valuable metals from spent lithium-ion batteries (LIBs) is crucial for environmental protection and resource optimization. In the traditional recovery process of spent LIBs, the leaching of high-valence metals has the problems of high cost and limited reagent utilization, and some valuable metals are lost in the subsequent purification process of the leaching solution. To reduce the cost of reagents, this study proposes the use of low-cost SO as a reagent combined with pressure leaching to efficiently recover high-valence metals from delithiated materials of spent LIBs, while selective solvent extraction is used to remove trace impurities in the leaching solution to avoid the loss of valuable metals.

Expression of concern: Highly porous copper-supported magnetic nanocatalysts: made of volcanic pumice textured by cellulose and applied for the reduction of nitrobenzene derivatives.

Expression of concern for 'Highly porous copper-supported magnetic nanocatalysts: made of volcanic pumice textured by cellulose and applied for the reduction of nitrobenzene derivatives' by Reza Taheri-Ledari , , 2021, , 25284-25295, https://doi.org/10.1039/D1RA03538J.

Enhanced extraction of heavy metals from gypsum-based hazardous waste by nanoscale sulfuric acid film at ambient conditions.

Low-cost, low-energy extraction of heavy metal(loid)s (HMs) from hazardous gypsum cake is the goal of the metallurgical industry to mitigate environmental risks and carbon emissions. However, current extracting routes of hydrometallurgy often suffer from great energy inputs and substantial chemical inputs. Here, we report a novel solid-like approach with low energy consumption and chemical input to extract HMs by thin films under ambient conditions.

First-Principles Investigation into the Interaction of HO with α-CsPbI and the Intrinsic Defects within It.

CsPbI possesses three photoactive black phases (α, β, and γ) with perovskite structures and a non-photoactive yellow phase (δ) without a perovskite structure. Among these, α-CsPbI exhibits the best performance. However, it only exists at high temperatures and it tends to transform into the δ phase at room temperature, especially in humid environments.

Study on CeFeB-based sintered magnets with Ce/RE> 80.

Up to now, the development of Ce/RE> 80% sintered permanent magnets still faces a challenge, owing to their seriously deteriorated microstructure. In this article, the CeNdFeBM (wt.%) sintered magnets with Ce/RE > 80% were investigated, the roles of minor Nd substitution were explored.

Blend Electrospinning of -Incorporating PCL/PLA/HA Fibers and Its Investigation for Bone Healing Applications.

One of the well-known postoperative complications that requires a number of prophylactic and curative treatments is infection. The implications of postsurgical infections are further exacerbated by the emergence of antibiotic-resistant strains. Reduced effectiveness of synthetic antibiotics has led to an interest in plant-based substances.

Evaluation of rheological, textural, and sensory characteristics of optimized vegan rice puddings prepared by various plant-based milks.

Nowadays, plant-based milks are being considered as an alternative to dairy milk due to their advantages, such as sustainability, reduced allergenicity, health benefits, and lactose-free nature. Plant-based milks are widely used in the preparation of desserts, cheese-like products, and beverages, among other applications. The aim of the present study was to formulate vegan rice puddings using various commercially available plant-based milks as a sustainable alternative to dairy milk.

Weak Electrostatic Force on K in Gel Polymer Electrolyte Realizes High Ion Transference Number for Quasi Solid-State Potassium Ion Batteries.

Quasi-solid-state potassium-ion batteries (SSPIBs) are of great potential for commercial use due to the abundant reserves and cost-effectiveness of resources, as well as high safety. Gel polymer electrolytes (GPEs) with high ionic conductivity and fast interfacial charge transport are necessary for SSPIBs. Here, the weak electrostatic force between K and electronegative functional groups in the ethoxylated trimethylolpropane triacrylate (ETPTA) polymer chains, which can promote fast migration of free K, is revealed.

Cu nanoparticles grafting on the surface of ZnO nanostructures to boost the porosity and surface area for effective removal of manganese ions from aqueous solutions.

Designing highly adsorptive materials for wastewater treatment via facile approaches is still challenging. To boost the recovery of heavy metals from wastewater, surface and structure modification are considered a successful route. Herein, we report the design of ZnO nanoparticles by a simple thermal decomposition method followed by grafting Cu nanoparticles (Cu NPs) over the ZnO surface.

Novel mixed heterovalent (Mo/Co)O-zerovalent Cu system as bi-functional electrocatalyst for overall water splitting.

A novel hybrid ternary metallic electrocatalyst of amorphous Mo/Co oxides and crystallized Cu metal was deposited over Ni foam using a one-pot, simple, and scalable solvothermal technique. The chemical structure of the prepared ternary electrocatalyst was systematically characterized and confirmed via XRD, FTIR, EDS, and XPS analysis techniques. FESEM images of (Mo/Co)O-Cu@NF display the formation of 3D hierarchical structure with a particle size range of 3-5 µm.

Synthesis and Optimization of Ni-Based Nano Metal-Organic Frameworks as a Superior Electrode Material for Supercapacitor.

Metal-organic frameworks (MOFs) are hybrid materials that are being explored as active electrode materials in energy storage devices, such as rechargeable batteries and supercapacitors (SCs), due to their high surface area, controllable chemical composition, and periodic ordering. However, the facile and controlled synthesis of a pure MOF phase without impurities or without going through a complicated purification process (that also reduces the yield) are challenges that must be resolved for their potential industrial applications. Moreover, various oxide formations of the Ni during Ni-MOF synthesis also represent an issue that affects the purity and performance.

Nanocomposite Marvels: Unveiling Breakthroughs in Photocatalytic Water Splitting for Enhanced Hydrogen Evolution.

An overview of the significant innovations in photocatalysts for H development, photocatalyst selection criteria, and photocatalytic modifications to improve the photocatalytic activity was examined in this Review, as well as mechanisms and thermodynamics. A variety of semiconductors have been examined in a structured fashion, such as TiO-, g-CN-, graphene-, sulfide-, oxide-, nitride-, oxysulfide-, oxynitrides, and cocatalyst-based photocatalysts. The techniques for enhancing the compatibility of metals and nonmetals is discussed in order to boost photoactivity within visible light irradiation.

Artificial intelligence-based prediction model for the elemental occurrence form of tailings and mine wastes.

With the advent of the second industrial revolution, mining and metallurgical processes generate large volumes of tailings and mine wastes (TMW), which worsens global environmental pollution. Studying the occurrence of metal and metalloid elements in TMW is an effective approach to evaluating pollution linked to TMW. However, traditional laboratory-based measurements are complicated and time-consuming; thus, an empirical method is urgently needed that can rapidly and accurately determine elemental occurrence forms.

Deciphering Structure-Activity Relationship Towards CO Electroreduction over SnO by A Standard Research Paradigm.

Authentic surface structures under reaction conditions determine the activity and selectivity of electrocatalysts, therefore, the knowledge of the structure-activity relationship can facilitate the design of efficient catalyst structures for specific reactivity requirements. However, understanding the relationship between a more realistic active surface and its performance is challenging due to the complicated interface microenvironment in electrocatalysis. Herein, we proposed a standard research paradigm to effectively decipher the structure-activity relationship in electrocatalysis, which is exemplified in the CO electroreduction over SnO .

Recent advances in visible light driven inactivation of bloom forming blue-green algae using novel nano-composites: Mechanism, efficiency and fabrication approaches.

Over the years, algae have proved to be a water pollutant due to global warming, climate change, and the unregulated addition of organic compounds in water bodies from diffused resources. Harmful algal blooms (HABs) are severely affecting the health of humans and aquatic ecosystems. Among available anti-blooming technologies, semiconductor photocatalysis has come forth as an effective alternative.

A New Functional Wheat Flour Flatbread (Bazlama) Enriched with High-β-Glucan Hull-Less Barley Flour.

Although the Med-Diet is a healthy diet model, it is affected by current dietary habits. Therefore, new foods with improved nutritional value should be developed to respond to the needs of people following the Med-Diet. This study was focused on developing high-β-glucan flat bread (bazlama) with a relatively lower GI.

Microwave-assisted extraction optimization of sesquiterpene lactones from roots: A sustainable approach to reduce energy consumption and carbon footprint.

roots are consumed as natural flavor components and raw or cooked as food, and their extracts are rich in sesquiterpene lactones such as alantolactone (AL) and isoalantolactone (IAL), which have recently attracted great attention due to their pharmacological properties. The industrial utilization of these compounds requires the development of green, efficient, cost-effective, and sustainable extraction protocols. Therefore, this study focused on the optimization of microwave-assisted extraction (MAE) process variables using Face-Centered Central Composite Design (FC-CCD).