Facile synthesis and characterization of a magnetic biosorbent derived from sodium alginate and activated graphite schist: Experimental and statistical physics analysis for Mn(VII) remediation.

HO-modified graphite schist (GS) and sodium alginate (SA) interface was loaded by FeO nanoparticles (MNPs) to prepare a magnetic biosorbent that was employed in removing Mn(VII) from solutions. The prepared GS/SA/MNPs adsorbent was investigated using a variety of techniques, including elemental mapping, TEM, XPS, FTIR, FESEM, EDX, XRD, XPS, and zeta potential. An experimental study supported by statistical physics calculations was carried out to obtain a new outline of the Mn(VII) uptake mechanism.

Embedding of Laser Generated TiO in Poly(ethylene oxide) with Boosted Li Conduction for Solid-State Lithium Metal Batteries.

Poly(ethylene oxide) (PEO)-based solid polymer electrolytes are considered promising materials for realizing high-safety and high-energy-density lithium metal batteries. However, the high crystallinity of PEO at room temperature triggers low ionic conductivity and Li transference number, critically hindering practical applications in solid-state lithium metal batteries. Herein, we prepared nanosized TiO with enriched oxygen vacancies down to 13 nm as fillers by laser irradiation, which can be coated by in situ generated polyacetonitrile, ensuring good dispersibility in PEO.

Low-temperature CeCoMnO spinel-type catalysts prepared by oxalate co-precipitation for selective catalytic reduction of NO using NH: A structure-activity relationship study.

CeCoMnO spinel-type catalysts for the selective catalytic reduction of NO using NH (NH-SCR) are usually prepared by alkaline co-precipitation. In this paper, a series of CeCoMnO spinel-type catalysts with different calcination temperatures were prepared by acidic oxalate co-precipitation. The physicochemical structures and NH-SCR activities of the CeCoMnO spinel-type catalysts prepared by oxalate co-precipitation and conventional ammonia co-precipitation were systematically compared.

Lead-Free Piezoelectric Energy Harvester Based on 2D Bismuth Titanate.

The use of two-dimensional (2D) layered materials with a noncentrosymmetric structure dramatically increases the potential of nanoscale electromechanical systems and electronic devices. In this work, liquid-phase exfoliation of bulk bismuth titanate was employed to synthesize atomically thin 2D sheets and fabricate a high-performance piezoelectric energy harvester. The structural and morphological properties of the 2D sheets were analyzed, confirming their phase purity and layer formation.

Lead, Cadmium, and Arsenic in Raw Cow's Milk in a Central Andean Area and Risks for the Peruvian Populations.

Milk and its derivatives are basic foods in Peru, especially for children. The Junín region, in the central Andes, is one of the leading dairy basins. However, the safety of milk is affected by mining-metallurgical activities, wastewater dumping, organic residues, and inappropriate use of organophosphate fertilizers in agriculture whose contaminants reach the food chain, putting human health at risk.

A comprehensive study for the potential removal of Eu radionuclides using a promising modified strontium-based MOF.

A facile modification of a strontium-based MOF using oxalic acid was carried out to prepare MTSr-OX MOF, which was used as a potential substance for eliminating Eu radioisotopes. Various analytical techniques were used to characterize MTSr-OX-MOF. The prepared MOF had a rod-like structure with a BET surface area of 101.

Breaking K Concentration Limit on Cu Nanoneedles for Acidic Electrocatalytic CO Reduction to Multi-Carbon Products.

Electrocatalytic CO reduction reaction (CO RR) to multi-carbon products (C ) in acidic electrolyte is one of the most advanced routes for tackling our current climate and energy crisis. However, the competing hydrogen evolution reaction (HER) and the poor selectivity towards the valuable C products are the major obstacles for the upscaling of these technologies. High local potassium ions (K ) concentration at the cathode's surface can inhibit proton-diffusion and accelerate the desirable carbon-carbon (C-C) coupling process.

Recent progress in high-performance environmental impacts of the removal of radionuclides from wastewater based on metal-organic frameworks: a review.

The nuclear industry is rapidly developing and the effective management of nuclear waste and monitoring the nuclear fuel cycle are crucial. The presence of various radionuclides such as uranium (U), europium (Eu), technetium (Tc), iodine (I), thorium (Th), cesium (Cs), and strontium (Sr) in the environment is a major concern, and the development of materials with high adsorption capacity and selectivity is essential for their effective removal. Metal-organic frameworks (MOFs) have recently emerged as promising materials for removing radioactive elements from water resources due to their unique properties such as tunable pore size, high surface area, and chemical structure.

A novel high activity MnFeO spinel catalyst for selective catalytic reduction of NO using NH prepared by a short process from natural minerals for low-temperature sintering flue gas: Effect of X value on catalytic mechanism.

The process of smelting and purifying the catalyst precursor salt from minerals is extremely complex, which directly leads to high catalyst costs and serious secondary pollution. In order to achieve energy saving and emission reduction in the catalyst preparation process, in-situ synthesis of catalyst materials from natural minerals is a new research direction. In this study, we firstly explored the optimal X value of MnFeO for the NH selective catalytic reduction of NO (NH-SCR) reaction, i.

Surface quality and dry sliding wear behavior of AZ61Mg alloy using Abbott firestone technique.

Currently, magnesium alloys are widely utilized in diverse sectors due to their unique properties. However, the AZ61Mg alloy, a commonly used magnesium alloy, is known to have poor wear resistance, which limits its applications. To address this issue, researchers have investigated various surface treatment techniques, including the Abbott Firestone method, to improve the wear resistance of this alloy.

Management of metabolic syndrome by nutraceuticals prepared from chitosan and ferulic acid with or without beta-sitosterol and their nanoforms.

Dyslipidemia, steatohepatitis and insulin resistance are among the components of metabolic syndrome (MS). Nutraceuticals containing chitosan, beta-sitosterol and/or ferulic acid and their nanostructures could have a potential role for management of MS. The aim of the present study was to assess the efficacy of the aforementioned nutraceuticals in treatment of MS in rat and their interaction with atorvastatin, a hypolipidemic drug.

Synthesis of Cu and CuO nanoparticles from e-waste and evaluation of their antibacterial and photocatalytic properties.

Waste printed circuit boards (WPCBs) contain a plethora of valuable metals, considered an attractive secondary resource. In the current research, a hydrometallurgical process combined ammonia/ammonium chloride leaching and reduction (using L-ascorbic acid) to recover copper and its oxide (CuO) as nanosized particles from WPCBs was investigated. The results of leaching indicated that 96.

Influence of heat treatment processes on microstructure evolution, tensile and tribological properties of Ti6Al4V alloy.

The influence of heat treatment processes on microstructure, tensile and tribological properties of Ti6Al4V alloy was investigated. The specimens were heated for 30 min at 925 °C and then cooled at various rates by water quenching, air cooling, and furnace cooling. After that, the samples were aged for four hours at 600 °C.

Solvothermal-based synthesis of barium stannate nanosheets coupled with copper manganate nanoparticles for efficient photooxidation of tetracycline under visible light.

Photocatalytic oxidation of antibiotic waste over semiconducting heterojunction photocatalysts is considered eco-friendly because it is simple and operates under light irradiation. In this work, we apply a solvothermal-based process for obtaining high surface area barium stannate (BaSnO) nanosheets followed by adding 3.0-12.

Worn surface topography and mathematical modeling of Ti-6Al-3Mo-2Sn-2Zr-2Nb-1.5Cr alloy.

This study aims at investigating worn surface topography and mathematical modeling of annealed Ti-6Al-3Mo-2Sn-2Zr-2Nb-1.5Cr alloy using response surface methodology (RSM). The alloy was subjected to three different regimes in order to study their effect on mechanical properties.

A novel hydrogeochemical approach to delineate the origin of potentially toxic elements in groundwater: Sophisticated molar ratios as environmental tracers.

The occurrence, mobilization, and origin of Potentially Toxic Eelements (PTEs) in the environment is always a difficult research question that has not been fully addressed to date; solving this problem would be a major achievement for environmental science and pollution research, a significant scientific breakthrough, and an important contribution to environmental analysis and monitoring. The lack of a holistic methodology that uses chemical analysis to determine the origin of each PTE in the environment is the main motivation for this project. Therefore, the hypothesis tested here is to develop a scientific approach applied to each PTE to determine whether its origin is geogenic (i.

Insight into Accelerating Polysulfides Redox Kinetics by BN@MXene Heterostructure for Li-S Batteries.

Sluggish redox kinetics and shuttle effect of polysulfides hinder the extensive application of the lithium-sulfur batteries (LSBs). Herein a functional heterostructure of boron nitride (BN) and MXene with an alternately layered structure (BN@MXene) is designed as separator interlayer. High efficiency Li transmission, uniform lithium deposition, strong adsorption, and efficient catalytic conversion activities of lithium polysulfides (LiPSs) realized by this heterostructure are confirmed by experiments and theoretical calculations.

A novel test device and quantitative colorimetric method for the detection of human chorionic gonadotropin (hCG) based on Au@Zn-salen MOF for POCT applications.

The human chorionic gonadotropin (hCG) hormone is a biomarker that can predict tumors and early pregnancy; however, it is challenging to develop sensitive qualitative-quantitative procedures that are also effective, inventive, and unique. In this study, we used a novel easy reaction of an organic nano-linker with Zn(NO)·6HO and HAuCl·3HO to produce a gold-zinc-salen metal-organic framework composite known as Au-Zn-Sln-MOF. A wide variety of micro-analytical instruments and spectroscopic techniques were used in order to characterize the newly synthesized Au-Zn-Sln-MOF composite.

Gelatin production from turkey (Meleagris gallopavo) skin as a new source: from waste to a sustainable food gelling agent.

Background: Turkey skin, a byproduct of poultry processing, contains a significant amount of collagen that might be used to make non-mammal gelatin. However, gelatin production from turkey skin has not yet been investigated. The present study aimed to determine the optimum gelatin extraction conditions from turkey employing the central composite design and response surface methodologies.

A Fresh One-Step Spray Pyrolysis Approach to Prepare Nickel-Rich Cathode Material for Lithium-Ion Batteries.

The Ni-rich layered cathode material LiNiCoMnO (NCM811) with high specific capacity and acceptable rate performance is one of the key cathode materials for high-energy-density lithium-ion batteries. Coprecipitation, the widely utilized method in the precursor synthesis of NCM811 materials, however, suffers long synthetic processes and challenges in uniform element distribution. The spray pyrolysis method is able to prepare oxide precursors in seconds where all transition-metal elements are well distributed, but the difficulty of lithium distribution will also arise when the lithium salts are added in the subsequent sintering process.

Interface Microstructure and Properties of Vacuum-Hot-Rolled 55#/316L Clad Rebars.

The existing process for the preparation of cladded rebars is too complicated for large-scale industrial production. Therefore, this paper proposes a 55#/316L rebar preparation method based on vacuum hot rolling. The microstructure and mechanical properties of the composite interface of the rebar, along with the connecting technique, were studied using transmission electron microscopy, X-ray diffraction, and Vickers hardness testing.

Improving the properties of commercial steel alloys in the industrial/nuclear field by RF plasma carbonitriding.

The study investigates the effect of RF plasma on the commercial SS201 and Steel alloys physical, structural and nuclear properties, using an atmosphere of nitrogen (85%) plus acetylene (15%) at 500 W working for 0.5 h. The results were compared with untreated alloys and AISI304L.