ROS mediated high anti-bacterial efficacy of strain tolerant layered phase pure nano-calcium hydroxide.

The present work provides the first ever report on extraordinarily high antibacterial efficacy of phase pure micro-layered calcium hydroxide nanoparticles (LCHNPs) even under dark condition. The LCHNPs synthesized especially in aqueous medium by a simple, inexpensive method show adequate mechanical properties along with the presence of a unique strain tolerant behaviour. The LCHNPs are characterized by FTIR, Raman spectroscopy, XRD, Rietveld analysis, FE-SEM, TEM, TG-DTA, surface area, particle size distribution, zeta potential analysis and nanoindentation techniques.

Performance of colloidal CdS sensitized solar cells with ZnO nanorods/nanoparticles.

As an alternative photosensitizer in dye-sensitized solar cells, bovine serum albumin (BSA) (a nonhazardous protein) was used in the synthesis of colloidal CdS nanoparticles (NPs). This system has been employed to replace the commonly used N719 dye molecule. Various nanostructured forms of ZnO, namely, nanorod and nanoparticle-based photoanodes, have been sensitized with colloidal CdS NPs to evaluate their effective performance towards quantum dot sensitized solar cells (QDSSCs).

Effect of bone morphogenetic protein on Zn-HAp and Zn-HAp/collagen composite: A systematic in vivo study.

Due to good biocompatibility and osteoconductivity, hydroxyapatite (HAp) and its composite with different polymers have been widely investigated for the application in the field of bone tissue engineering. The present study reports the, in vivo performance of zinc doped HAp and HAp/collagen composite (HAC) using bone morphogenetic protein-2. It was done for a span of two months on New Zealand rabbit model.

Hierarchically Structured Macro with Nested Mesoporous Zinc Indium Oxide Conducting Film.

Fabrication of homogeneously distributed (HD) macropores by breath figure process is an active research area. Adopting the process, for the first time, we report the fabrication of HD macro with nested meso (hierarchical) porous nanocrystalline zinc indium oxide conducting sol-gel thin film on glass by dip-coating at 45-50% room relative humidity (RH) from a solution in ethanol-2-butanol (1:1, w/w) medium with a 1:1, Zn:In ratio. In this process, solution composition and RH are found to play key roles on HD macropore generation.

In vivo pharmacological evaluation and efficacy study of methotrexate-encapsulated polymer-coated layered double hydroxide nanoparticles for possible application in the treatment of osteosarcoma.

Considering the existing drawbacks of methotrexate (MTX) with respect to its solubility and toxicity, we incorporated it in a nanoceramic matrix, Mg-Al-layered double hydroxide (LDH) to form LDH-MTX nanoparticles, and the same was in turn encapsulated in a nontoxic and biodegradable polymer, poly (D,L-lactide-co-glycolide) (PLGA), to arrest the initial burst release and dose-dumping-related toxicity, already reported by our group. Our present study was designed to evaluate the pharmacokinetics, tissue distribution, survival rate of the test animals, and antitumor efficacy of the PLGA-LDH-MTX nanoparticles and its counterpart without LDH, PLGA-MTX nanoparticles compared with bare MTX. The median lethal dose (LD) of the former was higher, compared with bare MTX, using Balb/c nude mice, indicating it to be completely safe for use.

Selective Binding of Genomic Escherichia coli DNA with ZnO Leads to White Light Emission: A New Aspect of Nano-Bio Interaction and Interface.

Here, we report for the first time, a novel and intriguing application of deoxyribonucleic acid (DNA) in the area of optics by demonstrating white light emission by tuning the emission of a nanomaterial, ZnO rods, exhibiting surface defects, in the presence of genomic Escherichia coli DNA with a comparatively high quantum efficiency. In order to understand the DNA specificity, we have also studied the interaction of ZnO with CT, and ML DNA, ss EC DNA, synthetic polynucleotides and different mononucleosides and bases. Further, in order to understand the effect of particle shape and defects present in ZnO, we have also extended our study with ZnO rods prepared at higher temperature exhibiting red emission and ZnO particles exhibiting yellow emission.

Experimental evidence for quantum cutting co-operative energy transfer process in Pr/Yb ions co-doped fluorotellurite glass: dispute over energy transfer mechanism.

Pr/Yb doped materials have been widely reported as quantum-cutting materials in recent times. However, the question of the energy transfer mechanism in the Pr/Yb pair in light of the quantum-cutting phenomenon still remains unanswered. In view of that, we explored a series of Pr/Yb co-doped low phonon fluorotellurite glass systems to estimate the probability of different energy transfer mechanisms.

Nanocolumnar Crystalline Vanadium Oxide-Molybdenum Oxide Antireflective Smart Thin Films with Superior Nanomechanical Properties.

Vanadium oxide-molybdenum oxide (VO-MO) thin (21-475 nm) films were grown on quartz and silicon substrates by pulsed RF magnetron sputtering technique by altering the RF power from 100 to 600 W. Crystalline VO-MO thin films showed the mixed phases of vanadium oxides e.g.

Design and application of Au decorated ZnO/TiO as a stable photocatalyst for wide spectral coverage.

A ternary nanostructured photocatalyst consisting of ZnO/TiO/Au was designed to achieve an enhanced solar absorption due to the coupling of surface enhanced plasmonic absorption of metal and semiconductor excitons. TiO coated ZnO rods with an aspect ratio of 8-12 were decorated with citrate capped gold nanoparticles for photocatalytic degradation of organic pollutants in simulated waste water under solar irradiation. Simulated waste water was prepared so as to get a mixture exhibiting a wide range of spectral distribution in the UV-visible region by deliberately mixing congo red, methylene blue and malachite green.

Strategies for delivering bone morphogenetic protein for bone healing.

Bone morphogenetic proteins (BMPs) are the most significant growth factors that belong to the Transforming Growth Factor Beta (TGF-β) super-family. Though more than twenty members of this family have been identified so far in humans, Food and Drug Administration (FDA) approved two growth factors: BMP-2 and BMP-7 for treatments of spinal fusion and long-bone fractures with collagen carriers. Currently BMPs are clinically used in spinal fusion, oral and maxillofacial surgery and also in the repair of long bone defects.

Understanding osteomyelitis and its treatment through local drug delivery system.

Chronic osteomyelitis is a major challenge in bone surgery. Conventional use of antibiotics is not an effective way to control the malaise due to so many reasons. Determination of optimal treatment strategy becomes difficult for the orthopaedic surgeons and as a consequence, the patients suffer not only from therapeutic failure but also due to adverse side effects of antibiotics and financial loss due to additional stay at hospitals.

Influence of single and binary doping of strontium and lithium on in vivo biological properties of bioactive glass scaffolds.

Effects of strontium and lithium ion doping on the biological properties of bioactive glass (BAG) porous scaffolds have been checked in vitro and in vivo. BAG scaffolds were prepared by conventional glass melting route and subsequently, scaffolds were produced by evaporation of fugitive pore formers. After thorough physico-chemical and in vitro cell characterization, scaffolds were used for pre-clinical study.

Alkali metal ion induced cube shaped mesoporous hematite particles for improved magnetic properties and efficient degradation of water pollutants.

Mesoporous cube shaped hematite (α-Fe2O3) particles were prepared using FeCl3 as an Fe(3+) precursor and 1-butyl-3-methylimidazolium bromide (ionic liquid) as a soft template in the presence of different alkali metal (lithium, sodium and potassium) acetates, under hydrothermal conditions at 150 °C/4 h followed by calcination at 350 °C. The formation of the α-Fe2O3 phase in the synthesized samples was confirmed by XRD, FTIR and Raman spectroscopy. Unlike K(+) ions, intercalation of Li(+) and Na(+) ions occurred in α-Fe2O3 crystal layers as evidenced by XRD and Raman spectroscopy.

Role of Yb(3+) ions on enhanced ~2.9 μm emission from Ho(3+) ions in low phonon oxide glass system.

The foremost limitation of an oxide based crystal or glass host to demonstrate mid- infrared emissions is its high phonon energy. It is very difficult to obtain radiative mid-infrared emissions from these hosts which normally relax non-radiatively between closely spaced energy levels of dopant rare earth ions. In this study, an intense mid-infrared emission around 2.

Fluorescent carbon nanoparticles from Citrus sinensis as efficient sorbents for pollutant dyes.

Here, we report a simple, green and economic process for the synthesis of highly fluorescent carbon nanoparticles (CPs) through low-temperature carbonization of a fruit waste, Citrus sinensis peel. This approach allows the large-scale production of aqueous CPs dispersions without any additives and post-treatment processes. The as-prepared CPs were of small particle size, exhibited bright blue fluorescence under UV irradiation (λ  = 365 nm) with excellent colloidal stability in water.

Unraveling the Interaction of Silver Nanoparticles with Mammalian and Bacterial DNA.

The focus of this study was to understand and unravel the interaction of silver nanoparticles (AgNPs) with different types of Deoxyribonucleic acid (DNA), mammalian and bacterial, having different base pair compositions. Binding of spherical silver nanoparticles (AgNPs) to Calf thymus (CT) DNA, Escherichia coli (EC) DNA and Micrococcus lysodeikticus (ML) DNA has been studied to gain insights into their mode of interaction and specificity. Interaction of AgNPs with synthetic DNA has also been carried out.

A Comparative Spectrophotometric Study Using Ferrozine and 1,10-Ortho-phenanthroline to Evaluate the Iron Redox Ratio (Fe(2+)/ΣFe) in Glass Prepared by Microwave Heating.

In the present study, Fe-doped barium borosilicate glass has been melted at 1250°C under microwave heating. The iron redox ratio (Fe(2+)/total Fe) in the glass is investigated by two spectrophotometric methods. A novel decomposition technique has been optimized to measure the ferrous oxidation state in glass.

Understanding compressive deformation behavior of porous Ti using finite element analysis.

In the present study, porous commercially pure (CP) Ti samples with different volume fraction of porosities were fabricated using a commercial additive manufacturing technique namely laser engineered net shaping (LENS™). Mechanical behavior of solid and porous samples was evaluated at room temperature under quasi-static compressive loading. Fracture surfaces of the failed samples were analyzed to determine the failure modes.

Surface Modification of Naturally Available Biomass for Enhancement of Heavy Metal Removal Efficiency, Upscaling Prospects, and Management Aspects of Spent Biosorbents: A Review.

Heavy metal pollution in water emerges as a severe socio-environmental problem originating primarily from the discharge of industrial wastewater. In view of the toxic, non-biodegradable, and persistent nature of most of the heavy metal ions, remediation of such components becomes an absolute necessity. Biosorption is an emerging tool for bioremediation that has gained momentum for employing low-cost biological materials with effective metal binding capacities.

Selective detection of Escherichia coli DNA using fluorescent carbon spindles.

We investigate the interaction of hydrophilic blue emitting carbon spindles with various deoxyribonucleic acids (DNA) having different base pair compositions, such as Herring testes (HT), calf thymus (CT), Escherichia coli (EC) and Micrococcus lysodeikticus (ML) DNA, to understand the mode of interaction. Interestingly, the fluorescent carbon spindles selectively interacted with E. coli DNA resulting in enhanced fluorescence of the former.

Nanostructured conducting polymers for energy applications: towards a sustainable platform.

Recently, there has been tremendous progress in the field of nanodimensional conducting polymers with the objective of tuning the intrinsic properties of the polymer and the potential to be efficient, biocompatible, inexpensive, and solution processable. Compared with bulk conducting polymers, conducting polymer nanostructures possess a high electrical conductivity, large surface area, short path length for ion transport and superior electrochemical activity which make them suitable for energy storage and conversion applications. The current status of polymer nanostructure fabrication and characterization is reviewed in detail.

Porous SiO2 nanofiber grafted novel bioactive glass-ceramic coating: A structural scaffold for uniform apatite precipitation and oriented cell proliferation on inert implant.

A composite bioactive glass-ceramic coating grafted with porous silica nanofibers was fabricated on inert glass to provide a structural scaffold favoring uniform apatite precipitation and oriented cell proliferation. The coating surfaces were investigated thoroughly before and after immersion in simulated body fluid. In addition, the proliferation behavior of fibroblast cells on the surface was observed for several culture times.

Enhanced bone regeneration with carbon nanotube reinforced hydroxyapatite in animal model.

In order to improve the inherently poor mechanical properties of hydroxyapatite (HAp) and to increase its feasibility as load bearing implant material, in the present investigation, functionalised (HFC1 and HFC2) and non-functionalized (HC1 and HC2) multi-walled carbon nanotubes were used as reinforcing material with HAp. Significant improvement with respect to fracture toughness, flexural strength and impact strength of the composites was noticed. In vitro biological properties of HAp-carbon nanotube (CNT) biocomposites have also favored uniform and systematic apatite growth on their surface.

Functionalized C@TiO2 hollow spherical architecture for multifunctional applications.

Hierarchical anatase titania (TiO2) with a hollow spherical architecture decorated with functionalized carbon dots (C(F)@THS) was synthesized by a solvothermal decomposition of titanium(IV) isopropoxide (TTIP) in the presence of a solution mixture containing thiourea and citric acid. Interestingly, the concomitant presence of thiourea and citric acid has been found to be essential to obtain such hierarchical hollow architecture because individual constituents produced non-hollow spheres when hydrothermally treated with TTIP. The co-existence of these two constituents also accelerates the growth of hollow spheres.