Improved Ethanol Sensing Performance of α-MnO Nanorods at Room Temperature Enabled through PPy Embedding.

Ethanol is a colorless, highly flammable, volatile organic compound and is a biomarker for fatty liver diseases. So, high-performance and reliable ethanol sensors are the need of the day for biomedical and environmental monitoring applications and drunken driving detection. In this work, we have reported a polypyrrole (PPy)-embedded α-MnO nanorod (NR)-based chemiresistive sensor for the selective detection of trace ethanol vapor at room temperature (25 °C).

Phyto-assisted synthesis of CuO/industrial waste derived biochar composite for adsorptive removal of doxycycline hydrochloride and recycling of spent biochar as green energy storage device.

The highest exposure of Endocrine disrupting compounds (EDC) into the water bodies as a result of extensive production and application of Covid-19 related drugs is a growing concern now a days. Herein, a novel nanocomposite material was developed by impregnating green synthesized copper oxide nanoparticles on the porous surface of fabric waste derived biochar to eliminate the concerned EDCs along with a sustainable disposal strategy for the spent adsorbent. Morphological characterizations by Field emission scanning electron microscopy confirmed the formation of hierarchical porous structured material.

Squeeze Film Effect in Surface Micromachined Nano Ultrasonic Sensor for Different Diaphragm Displacement Profiles.

In the present paper, we have analytically explored the small variations of the local pressure in the trapped air film of both sides of the clamped circular capacitive micromachined ultrasonic transducer (CMUT), which consists of a thin movable membrane of silicon nitride (SiN). This time-independent pressure profile has been investigated thoroughly by solving the associated linear Reynold's equation in the framework of three analytical models, viz. membrane model, plate model, and non-local plate model.

In Vitro and In Vivo Bone Regeneration Assessment of Titanium-Doped Waste Eggshell-Derived Hydroxyapatite in the Animal Model.

In this work, a titanium-doped hydroxyapatite (HAp) scaffold was produced from two different sources (natural eggshell and laboratory-grade reagents) to compare the efficacy of natural and synthetic resources of HAp materials on new bone regeneration. This comparative study also reports the effect of Ti doping on the physical, mechanical, and in vitro as well as in vivo biological properties of the HAp scaffold. Pellets were prepared in the conventional powder metallurgy route, compacted, and sintered at 900 °C, showing sufficient porosity for bony ingrowth.

Band-structure tunability the modulation of excitons in semiconductor nanostructures: manifestation in photocatalytic fuel generation.

Understanding the energetics of electron transfer at the semiconductor interface is crucial for the development of solar harvesting technologies, including photovoltaics, photocatalysis, and solar fuel systems. However, modern artificial photosynthetic materials are not efficient and limited by their fast charge recombination with high binding energy of excitons. Hence, reducing the exciton binding energy can increase the generation of charge carriers, which improve the photocatalytic activities.

Advanced Sustainable Trilayer Cellulosic "Paper Separator" Functionalized with Nano-BaTiO for Applications in Li-Ion Batteries and Supercapacitors.

In the quest of developing a sustainable, low-cost and improved separator membrane for application in energy storage devices like lithium-ion batteries (LIBs) and supercapacitors (SCs), here we fabricated a trilayer cellulose-based paper separator engineered with nano-BaTiO powder. A scalable fabrication process of the paper separator was designed step-by-step by sizing with poly(vinylidene fluoride) (PVDF), thereafter impregnating nano-BaTiO in the interlayer using water-soluble styrene butadiene rubber (SBR) as the binder and finally laminating the ceramic layer with a low-concentration SBR solution. The fabricated separators showed excellent electrolyte wettability (216-270%), quicker electrolyte saturation, increased mechanical strength (43.

Nature-Driven Biocompatible Epidermal Electronic Skin for Real-Time Wireless Monitoring of Human Physiological Signals.

Wearable bioelectronic patches are creating a transformative effect in the health care industry for human physiological signal monitoring. However, the use of such patches is restricted due to the unavailability of a proper power source. Ideal biodevices should be thin, soft, robust, energy-efficient, and biocompatible.

Role of Efficient Charge Transfer at the Interface between Mixed-Phase Copper-Cuprous Oxide and Conducting Polymer Nanostructures for Photocatalytic Water Splitting.

Photocatalytic hydrogen generation from water splitting is regarded as a sustainable technology capable of producing green solar fuels. However, the low charge separation efficiencies and the requirement of lowering redox potentials are unresolved challenges. Herein, a multiphase copper-cuprous oxide/polypyrrole (PPy) heterostructure has been designed to identify the role of multiple oxidation states of metal oxides in water reduction and oxidation.

Microwave-assisted synthesis of GdOF: Eu/Tb ultrafine phosphor powders suitable for advanced forensic and security ink applications.

The rare-earth-doped inorganic ultrafine oxyfluoride host matrices in forensic science, especially in latent fingerprint detection and anti-counterfeiting applications, were still unexplored and may replace the existing technology owing to its high sensitivity. Herein, GdOF: Eu/Tb ultrafine red and green phosphors were synthesized via a rapid, green microwave-assisted hydrothermal method at 150 °C. The phosphors synthesized by this novel method possess good luminescent intensity for the hypersensitive D→F transition of Eu and D→F transition of Tb ions as compared to the phosphors prepared via other conventional methods such as co-precipitation synthesis, sol-gel synthesis, and microwave-assisted co-precipitation synthesis.

Ultrasensitive Boron-Nitrogen-Codoped CVD Graphene-Derived NO Gas Sensor.

Recent trends in 2D materials like graphene are focused on heteroatom doping in a hexagonal honeycomb lattice to tailor the desired properties for various lightweight atomic thin-layer derived portable devices, particularly in the field of gas sensors. To design such gas sensors, it is important to either discover new materials with enhanced properties or tailor the properties of existing materials via doping. Herein, we exploit the concept of codoping of heteroatoms in graphene for more improvements in gas sensing properties and demonstrate a boron- and nitrogen-codoped bilayer graphene-derived gas sensor for enhanced nitrogen dioxide (NO) gas sensing applications, which may possibly be another alternative for an efficient sensing device.

Advancing Electrode Properties through Functionalization for Solid Oxide Cells Application: A Review.

Hydrogen energy has emerged as the only renewable which is capable of sustaining the prevalent energy crisis in conjunction with other intermittent sources. In this connection, solid oxide cell (SOC) is the most sustainable solid-state devices capable of recycling and reproducing green hydrogen fuel. It is operable in reversible modes viz, fuel cell (FC) and electrolysis cell (EC).

ZnSbOF and KI-Doped ZnSbOF: A Metal Oxyfluoride System for Photocatalytic Activity, Knoevenagel Condensation, and Bacterial Disinfection.

ZnSbOF crystallites were synthesized by a pH-regulated hydrothermal synthetic approach, while doping on ZnSbOF by KI was performed by the "incipient wetness impregnation technique." The effect of KI in ZnSbOF is found with the changes in morphology in the doped compound, i.e.

Enhanced piezoelectric response in BTO NWs-PVDF composite through tuning of polar phase content.

We have fabricated a flexible, environment friendly piezoelectric nanogenerator (PENG) based on the ferroelectric Polyvinylidene fluoride (PVDF) composite incorporated with Barium titanate (BaTiO) nanowires (NWs) of piezoelectric coefficient = 308 pm V. The single-layered PENG can deliver output power density of 10W cmand an output voltage of 2 V with a nominal mechanical load of 1 kPa. BaTiO(BTO) NWs of different concentrations were incorporated into PVDF to tune the polar phase content, internal resistance, and optimize the output power.

Ga-Doped LLZO Solid-State Electrolyte with Unique "Plate-like" Morphology Derived from Water Hyacinth () Aquatic Weed: Waste to Wealth Conversion.

An attempt has been made for the first time to convert waste biomass such as water hyacinth (WH) to a functional energy material in a cost-effective way. The present research describes a novel exo-templating methodology to develop engineered microstructure of Ga-doped LiLaZrO (LiLaGaZrO, referred as WH-Ga-LLZO) solid-state electrolyte for its use in all solid-state lithium batteries (ASSLBs) by mimicking the intercellular structure of water hyacinth (), an invasive and noxious aquatic plant. The developed exo-templated methodology offers a low calcination temperature of 1000 °C in air where all the major peaks could be indexed as cubic garnet, as confirmed by XRD.

Fundamental understanding of the size and surface modification effects on , the relaxivity of Prussian blue nanocube@-SiO: a novel targeted chemo-photodynamic theranostic agent to treat colon cancer.

A targeted multimodal strategy on a single nanoplatform is attractive in the field of nanotheranostics for the complete ablation of cancer. Herein, we have designed mesoporous silica (-SiO)-coated Prussian blue nanocubes (PBNCs), functionalized with hyaluronic acid (HA) to construct a multifunctional PBNC@-SiO@HA nanoplatform that exhibited good biocompatibility, excellent photodynamic activity, and -weighted magnetic resonance imaging ability ( ∼ 3.91 mM s).

Sustainable conversion of textile industry cotton waste into P-dopped biochar for removal of dyes from textile effluent and valorisation of spent biochar into soil conditioner towards circular economy.

Effective immobilization of industrial waste into biochar development could be one of the most promising technologies for solid waste management to achieve circular economy. In this study, post-industrial cotton textile waste (PICTW), a cellulose rich industrial waste, was subjected to slow pyrolysis to develop a surface engineered biochar through phosphoric acid impregnation. Biochar produced at 500 °C designated as PICTWB500 showed a maximum methylene blue number (240 mg g) with remarkable specific surface area of 1498 m g.

Copper and cobalt doped bioactive glass-fish dermal collagen electrospun mat triggers key events of diabetic wound healing in full-thickness skin defect model.

The wounds arising out of underlying hyperglycemic conditions such as diabetic foot ulcers demand a multifunctional tissue regeneration approach owing to several deficiencies in the healing mechanisms. Herein, four different types of electrospun microfibers by combining Rohu fish skin-derived collagen (Fcol) with a bioactive glass (BAG)/ion-doped bioactive glass, namely, Fcol/BAG, Fcol/CuBAG, Fcol/CoBAG, and Fcol/CuCoBAG was developed to accelerate wound healing through stimulation of key events such as angiogenesis and ECM re-construction under diabetic conditions. SEM analysis shows the porous and microfibrous architecture, while the EDX mapping provides evidence of the incorporation of dopants inside various inorganic-organic composite mats.

LnTeO (Ln = La, Gd, and Eu) "Anti-Glass" Phase-Assisted Lanthanum-Tellurite Transparent Glass-Ceramics: Eu Emission and Local Site Symmetry Analysis.

The presence of lanthanide-tellurite "anti-glass" nanocrystalline phases not only affects the transparency in glass-ceramics (GCs) but also influences the emission of a dopant ion. Therefore, a methodical understanding of the crystal growth mechanism and local site symmetry of doped luminescent ions when embedded into the precipitated "anti-glass" phase is crucial, which unfolds the practical applications of GCs. Here, we examined the LnTeO "anti-glass" nanocrystalline phase growth mechanism and local site symmetry of Eu ions in transparent GCs produced from 80TeO-10TiO-(5 - )LaO-5GdO-EuO glasses, where = 0, 1, 2.

Supramolecular Arrangement and DFT analysis of Zinc(II) Schiff Bases: An Insight towards the Influence of Compartmental Ligands on Binding Interaction with Protein.

We report, for the first time, a detailed crystallographic study of the supramolecular arrangement for a set of zinc(II) Schiff base complexes containing the ligand 2,6-bis((E)-((2-(dimethylamino)ethyl)imino)methyl)-4-R-phenol], where R=methyl/tert-butyl/chloro. The supramolecular study acts as a pre-screening tool for selecting the compartmental ligand R of the Schiff base for effective binding with a targeted protein, bovine serum albumin (BSA). The most stable hexagonal arrangement of the complex [Zn-Me] (R=Me) stabilises the ligand with the highest FMO energy gap (ΔE=4.

Chemiresistive NH detection at sub-zero temperatures by polypyrrole- loaded SnSbO nanocubes.

Chemiresistive gas sensors operate mainly at high temperatures, primarily due to the need of energy for surface adsorption-desorption of analytes. As a result, the operating temperature of the chemiresistive sensors could be reduced only to room temperature. Hence, a plethora of sensing requirements at temperatures below ambient have remained outside the scope of chemiresistive materials.

A Ni(II) Metal-Organic Framework with Mixed Carboxylate and Bipyridine Ligands for Ultrafast and Selective Sensing of Explosives and Photoelectrochemical Hydrogen Evolution.

We report a (nickel metal-organic framework), , synthesized by using two linkers 5-sulfoisophthalic acid (SIP) and 4,4'-bipyridine (BPY) simultaneously. It displays an orthorhombic crystal system with the 2 space group: = 31.425 Å, = 19.

pH-regulated hydrothermal synthesis and characterization of SbOX (X = Br/Cl) and its use for the dye degradation of methyl orange both with and without light illumination.

A pH-regulated hydrothermal synthesis method was employed to synthesize SbOBr and SbOCl crystallites. Characterization is done by single crystal X-ray diffraction, powder X-ray diffraction, infra-red spectroscopy, scanning electron microscopy and DFT studies. The compounds crystallize in monoclinic symmetry with a 2/ space group.

Performance assessment of the indigenous ceramic UF membrane in bioreactor process for highly polluted tannery wastewater treatment.

The present study evaluates the performance of an indigenously developed ceramic ultrafiltration (UF) membrane in a lab-scale membrane bioreactor (MBR) process to treat real tannery effluent with varying organic loading (1500-6000 mg/L). UF membrane was prepared by the coating of bentonite clay on tubular clay-alumina macroporous support. The membrane surface was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, BET adsorption-desorption, contact angle measurement, and atomic force microscopy.

Decisive Role of Polymer-Bovine Serum Albumin Interactions in Biofilm Substrates on "Philicity" and Extracellular Polymeric Substances Composition.

Formation of extracellular polymeric substances (EPS) is a crucial step for bacterial biofilm growth. The dependence of EPS composition on growth substrate and conditioning of the latter is thus of primary importance. We present results of studies on the growth of biofilms of two different strains each, of the Gram-negative bacteria and , on four polymers used commonly in indwelling medical devices ─polyethene, polypropylene, polycarbonate, and polytetrafluoroethylene─immersed in bovine serum albumin (BSA) for 24 h.