The Influence of Environmental Factors on the Degradation of PLA/Diatomaceous Earth Composites.

In the present study, tests were carried out on composite samples on a polylactide matrix containing 25% by weight of mineral filler in the form of diatomaceous earth, base, and silanized with GPTMOS (3-glycidoxypropyltrimethoxysilane), OTES (n-octyltriethoxysilane), and MTMOS (methyltrimethoxysilane) silanes. The addition of two types of waxes, synthetic polyamide wax and natural beeswax, were used as a factor to increase the rheological properties of the composites. The obtained samples were characterized in terms of the effect of filler silanization on the degradation rate of the composites.

Structural characterization and evaluation of antimicrobial and cytotoxic activity of six plant phenolic acids.

Phenolic acids still gain significant attention due to their potential antimicrobial and cytotoxic properties. In this study, we have investigated the antimicrobial of six phenolic acids, namely chlorogenic, caffeic, p-coumaric, rosmarinic, gallic and tannic acids in the concentration range 0.5-500 μM, against Escherichia coli and Lactobacillus rhamnosus.

Characterization and isolation method of Gigantochloa scortechinii (Buluh Semantan) cellulose nanocrystals.

This study explored the impact of sodium hydroxide and benzoylation treatment on the production of cellulose nanocrystals from Semantan bamboo (Gigantochloa scortechinii). Bamboo cellulose nanocrystals (BCNs) were obtained via acid hydrolysis, with the effectiveness of an isolation method and chemical treatments demonstrated in removing non-cellulosic constituents. X-ray diffraction analysis revealed a crystalline cellulose II structure for benzoylated BCN (B) and a crystalline cellulose I structure for NaOH-treated BCN (S), with BCN (S) exhibiting a higher crystallinity index (80.

Application of Instrumented Indentation Procedure in Assessing the Low-Cycle Fatigue Properties of Selected Heat-Treated Steels.

The paper presents an analysis of the low-cycle fatigue (LCF) properties of C45, X20Cr13, and 34CrNiMo6 steels subjected to various heat treatment processes. Strain-controlled LCF tests were carried out with a total cyclic strain amplitude equal to 0.5, 1 and 1.

Use of Alkaline-Activated Energy Waste Raw Materials in Geopolymer Concrete.

Silica fly ash, Certyd aggregate, and an alkaline solution were used to produce lightweight geopolymer concretes. The compressive strength, water absorption, and bulk density results, along with SEM photos showing the structure of the obtained composite, were obtained. Tests conducted on the specifications of lightweight geopolymer concretes have revealed significant chemical interactions between the ash aggregate and the geopolymer mortar, particularly when the coarse aggregate surface has been pre-treated with an alkaline solution.

Crack Resistance of Lightly Reinforced Concrete Structures.

The crack resistance of concrete structures with low reinforcement ratios requires a broader examination. It is particularly important in the case of foundations working in changing subsoil conditions. Unfavorable phenomena occurring in the subsoil (e.

The Synergistic Effect of Reduced Graphene Oxide and Proteasome Inhibitor in the Induction of Apoptosis through Oxidative Stress in Breast Cancer Cell Lines.

Reduced graphene oxide (rGO) and a proteasome inhibitor (MG-132) are some of the most commonly used compounds in various biomedical applications. However, the mechanisms of rGO- and MG-132-induced cytotoxicity remain unclear. The aim of this study was to investigate the anticancer effect of rGO and MG-132 against ZR-75-1 and MDA-MB-231 breast cancer cell lines.

Impact of Normalization on Entropy-Based Weights in Hellwig's Method: A Case Study on Evaluating Sustainable Development in the Education Area.

Determining criteria weights plays a crucial role in multi-criteria decision analyses. Entropy is a significant measure in information science, and several multi-criteria decision-making methods utilize the entropy weight method (EWM). In the literature, two approaches for determining the entropy weight method can be found.

Air pollution in Białowieża forest: Analysis of short-term trends from 2014 to 2021.

Air pollution caused by sulphur dioxide (SO) and nitrogen oxides (NO) has negative impacts on forest health and can initiate forest dieback. Long-term monitoring and analysis of these pollution are carried out in Białowieża Forest in NE Poland due to the threats from abiotic, biotic and anthropogenic factors. The main objective of our study was to monitor the levels and trends of air pollutant deposition in Białowieża Forest.

Patient classification and attribute assessment based on machine learning techniques in the qualification process for surgical treatment of adrenal tumours.

Adrenal gland incidentaloma is frequently identified through computed tomography and poses a common clinical challenge. Only selected cases require surgical intervention. The primary aim of this study was to compare the effectiveness of selected machine learning (ML) techniques in proper qualifying patients for adrenalectomy and to identify the most accurate algorithm, providing a valuable tool for doctors to simplify their therapeutic decisions.

The Use of Wind Turbine Blades to Build Road Noise Barriers as an Example of a Circular Economy Model.

This project's objective was to create a circular economy in the composites sector by examining the possibility of using wind turbine blade composite materials to construct noise-absorbing barriers for roads. The possibility of constructing road noise barrier panels from components obtained from turbine blades was conceptually examined, and the geometry and construction of wind turbine blades were evaluated for their suitability as filler components for panels. The tensile strength parameters of two types of composites made from windmill blades-a solid composite and a sandwich type-were established based on material tests.

Spin-Coating Fabrication Method of PDMS/NdFeB Composites Using Chitosan/PCL Coating.

This paper verified the possibility of applying chitosan and/or ferulic acid or polycaprolactone (PCL)-based coatings to polydimethylsiloxane/neodymium-iron-boron (PDMS/NdFeB) composites using the spin-coating method. The surface modification of magnetic composites by biofunctional layers allows for the preparation of materials for biomedical applications. Biofunctional layered magnetic composites were obtained in three steps.

Chemical Composition of Volatile and Extractive Components of Canary (Tenerife) Propolis.

The vegetation of the Canary Islands is characterized by a large number of endemic species confined to different altitudinal levels. It can be assumed that these circumstances determine the characteristic features of the chemical composition of local beekeeping products, including propolis. We report, for the first time, the chemical composition of propolis from Tenerife (Canary Islands).

Design and Manufacture of a Micro-Ejector and the Testing Stand for Investigation of Micro-Ejector Refrigeration Systems.

This paper describes the procedure of design and manufacture of a micro-ejector proposed for miniature ejection refrigeration systems. It describes the procedure of design, fabrication, and experimentation on supersonic micro-ejectors and makes the case for isobutane as a working fluid for such systems. It was demonstrated that it is possible to design and fabricate a micro-ejector with a cooling capacity of approximately 3 W.

OH End-Capped Silicone as an Effective Nucleating Agent for Polylactide-A Robotizing Method for Evaluating the Mechanical Characteristics of PLA/Silicone Blends.

Current research on materials engineering focuses mainly on bio-based materials. One of the most frequently studied materials in this group is polylactide (PLA), which is a polymer derived from starch. PLA does not have a negative impact on the natural environment and additionally, it possesses properties comparable to those of industrial polymers.

Manufacturing Options for Activated Carbons with Selected Synthetic Polymers as Binders.

Formed activated carbon (AC) is a multipurpose product with developed adsorption properties that is widely used in various areas of life. To create AC, hard coal has to go through various processes: grinding, granulation, carbonization, physical and/or chemical activation. Presented research was conducted in the professional company manufacturing activated carbons.

Properties of Geopolymer Mixtures Incorporating Recycled Ceramic Fines.

This research aimed to optimize the production conditions for geopolymer matrices by investigating the combination of heat curing conditions and the incorporation of recycled ceramic fines (CFs) as a partial replacement material for fly ash (FA). The obtained physical and mechanical properties of the composites confirmed the positive impact resulting from increasing the curing temperature from 65 °C to 85 °C and using CFs in the amount of 37.5% as a replacement for FA.

Biological effects of vanillic acid, iso-vanillic acid, and orto-vanillic acid as environmental pollutants.

Vanillic acid (4-hydroxy-3-methoxybenzoic acid) (VA) is a natural benzoic acid derivative commonly found in herbs, rice, maize, and some fruits and vegetables. However, due to the wide use of VA in various industrial sectors, its presence in the environment might harm living organisms. This study evaluated the toxicity of VA and its isomers, iso-VA and orto-VA.

Thermally modified nanocrystalline snail shell adsorbent for methylene blue sequestration: equilibrium, kinetic, thermodynamic, artificial intelligence, and DFT studies.

In recent years, the quest for an efficient and sustainable adsorbent material that can effectively remove harmful and hazardous dyes from industrial effluent has become more intense. The goal is to explore the capability of thermally modified nanocrystalline snail shells (TMNSS) as a new biosorbent for removing methylene blue (MB) dye from contaminated wastewater. TMNSS was employed in batch adsorption experiments to remove MB dye from its solutions, taking into account various adsorption parameters such as contact time, temperature, pH, adsorbent dosage, and initial concentration.

ITree: a user-driven tool for interactive decision-making with classification trees.

Motivation: ITree is an intuitive web tool for the manual, semi-automatic, and automatic induction of decision trees. It enables interactive modifications of tree structures and incorporates Relative Expression Analysis for detecting complex patterns in high-throughput molecular data. This makes ITree a versatile tool for both research and education in biomedical data analysis.

Quantitative assessment of the financial hardship in the euro area countries.

The article examines financial hardship (FH) that appears as one of the essential socio-economic-financial categories reflecting a financial burden on society and therefore having a significant impact on the social and economic development of the country. The purpose of this article is to propose and approve a methodology for the complex quantitative assessment of financial difficulty, which allows comparing countries one another. The novelty of the conducted research is manifested by the formed financial hardship adequately exposing a system of indicators and suggesting the transformation of incomparable indicators into the comparable ones.

Plants, Microorganisms and Their Metabolites in Supporting Asbestos Detoxification-A Biological Perspective in Asbestos Treatment.

Many countries banned asbestos due to its toxicity, but considering its colossal use, especially in the 1960s and 1970s, disposing of waste containing asbestos is the current problem. Today, many asbestos disposal technologies are known, but they usually involve colossal investment and operating expenses, and the end- and by-products of these methods negatively impact the environment. This paper identifies a unique modern direction in detoxifying asbestos minerals, which involves using microorganisms and plants and their metabolites.

Microstructure and Corrosion of Mg-Based Composites Produced from Custom-Made Powders of AZ31 and Ti6Al4V via Pulse Plasma Sintering.

Magnesium (Mg) and its alloys offer promise for aerospace, railway, and 3D technology applications, yet their inherent limitations, including inadequate strength, pose challenges. Magnesium matrix composites, particularly with metallic reinforcements like titanium (Ti) and its alloys, present a viable solution. Therefore, this study investigates the impact of Ti6Al4V reinforcement on AZ31 magnesium alloy composites produced using pulse plasma sintering (PPS).

Practice Guidelines for Monitoring Neuromuscular Blockade-Elements to Change to Increase the Quality of Anesthesiological Procedures and How to Improve the Acceleromyographic Method.

Neuromuscular blocking agents are a crucial pharmacological element of general anesthesia. Decades of observations and scientific studies have resulted in the identification of many risks associated with the uncontrolled use of neuromuscular blocking agents during general anesthesia or an incomplete reversal of neuromuscular blockade in the postoperative period. Residual relaxation and acute postoperative respiratory depression are the most serious consequences.