Structural-Functional Integrated Graphene-Skinned Aramid Fibers for Electromagnetic Interference Shielding.

Structural-functional integrated polymer fibers with exciting properties are increasingly important for next-generation technologies. Herein, we report the structural-functional integrated graphene-skinned aramid fiber (GRAF) featuring high conductivity, high strength, and light weight, which is weaved for efficient electromagnetic interference (EMI) shielding. Graphene was self-assembled onto the surface of aramid fibers through a dip-coating strategy using an aramid polyanion (APA) as the binder and the etchant.

Wet-spinning of carbon nanotube fibers: dispersion, processing and properties.

Owing to the intrinsic excellent mechanical, electrical, and thermal properties of carbon nanotubes (CNTs), carbon nanotube fibers (CNTFs) have been expected to become promising candidates for the next-generation of high-performance fibers. They have received considerable interest for cutting-edge applications, such as ultra-light electric wire, aerospace craft, military equipment, and space elevators. Wet-spinning is a broadly utilized commercial technique for high-performance fiber manufacturing.

Biocompatible triboelectric energy generators (BT-TENGs) for energy harvesting and healthcare applications.

Electronic waste (e-waste) has become a significant environmental and societal challenge, necessitating the development of sustainable alternatives. Biocompatible and biodegradable electronic devices offer a promising solution to mitigate e-waste and provide viable alternatives for various applications, including triboelectric nanogenerators (TENGs). This review provides a comprehensive overview of recent advancements in biocompatible, biodegradable, and implantable TENGs, emphasizing their potential as energy scavengers for healthcare devices.

Ultraflat single-crystal hexagonal boron nitride for wafer-scale integration of a 2D-compatible high-κ metal gate.

Hexagonal boron nitride (hBN) has emerged as a promising protection layer for dielectric integration in the next-generation large-scale integrated electronics. Although numerous efforts have been devoted to growing single-crystal hBN film, wafer-scale ultraflat hBN has still not been achieved. Here, we report the epitaxial growth of 4 in.

Graphene-skinned alumina fiber fabricated through metalloid-catalytic graphene CVD growth on nonmetallic substrate and its mass production.

Graphene growth on widely used dielectrics/insulators via chemical vapor deposition (CVD) is a strategy toward transfer-free applications of CVD graphene for the realization of advanced composite materials. Here, we develop graphene-skinned alumina fibers/fabrics (GAFs/GAFFs) through graphene CVD growth on commercial alumina fibers/fabrics (AFs/AFFs). We reveal a vapor-surface-solid growth model on a non-metallic substrate, which is distinct from the well-established vapor-solid model on conventional non-catalytic non-metallic substrates, but bears a closer resemblance to that observed on catalytic metallic substrates.

Carbon nanotube fibers with dynamic strength up to 14 GPa.

High dynamic strength is of fundamental importance for fibrous materials that are used in high-strain rate environments. Carbon nanotube fibers are one of the most promising candidates. Using a strategy to optimize hierarchical structures, we fabricated carbon nanotube fibers with a dynamic strength of 14 gigapascals (GPa) and excellent energy absorption.

Multispecies-coadsorption-induced rapid preparation of graphene glass fiber fabric and applications in flexible pressure sensor.

Direct chemical vapor deposition (CVD) growth of graphene on dielectric/insulating materials is a promising strategy for subsequent transfer-free applications of graphene. However, graphene growth on noncatalytic substrates is faced with thorny issues, especially the limited growth rate, which severely hinders mass production and practical applications. Herein, graphene glass fiber fabric (GGFF) is developed by graphene CVD growth on glass fiber fabric.

Fabricating Ultrastrong Carbon Nanotube Fibers via a Microwave Welding Interface.

Liquid crystal wet-spun carbon nanotube fibers (CNTFs) offer notable advantages, such as precise alignment and scalability. However, these CNTFs usually suffer premature failure through intertube slippage due to the weak interfacial interactions between adjacent shells and bundles. Herein, we present a microwave (MW) welding strategy to enhance intertube interactions by partially carbonizing interstitial heterocyclic aramid polymers.

Kinetic Modulation of Carbon Nanotube Growth in Direct Spinning for High-Strength Carbon Nanotube Fibers.

With impressive individual properties, carbon nanotubes (CNTs) show great potential in constructing high-performance fibers. However, the tensile strength of as-prepared carbon nanotube fibers (CNTFs) by floating catalyst chemical vapor deposition (FCCVD) is plagued by the weak intertube interaction between the essential CNTs. Here, we developed a chlorine (Cl)/water (HO)-assisted length furtherance FCCVD (CALF-FCCVD) method to modulate the intertube interaction of CNTs and enhance the mechanical strength of macroscopic fibers.

Quasi van der Waals Epitaxy of Single Crystalline GaN on Amorphous SiO/Si(100) for Monolithic Optoelectronic Integration.

The realization of high quality (0001) GaN on Si(100) is paramount importance for the monolithic integration of Si-based integrated circuits and GaN-enabled optoelectronic devices. Nevertheless, thorny issues including large thermal mismatch and distinct crystal symmetries typically bring about uncontrollable polycrystalline GaN formation with considerable surface roughness on standard Si(100). Here a breakthrough of high-quality single-crystalline GaN film on polycrystalline SiO/Si(100) is presented by quasi van der Waals epitaxy and fabricate the monolithically integrated photonic chips.

Observation of the nonanalytic behavior of optical phonons in monolayer hexagonal boron nitride.

Phonon splitting of the longitudinal and transverse optical modes (LO-TO splitting), a ubiquitous phenomenon in three-dimensional polar materials, will break down in two-dimensional (2D) polar systems. Theoretical predictions propose that the LO phonon in 2D polar monolayers becomes degenerate with the TO phonon, displaying a distinctive "V-shaped" nonanalytic behavior near the center of the Brillouin zone. However, the full experimental verification of these nonanalytic behaviors has been lacking.

Direct Observation of Topological Phonons in Graphene.

Phonons, as the most fundamental emergent bosons in condensed matter systems, play an essential role in the thermal, mechanical, and electronic properties of crystalline materials. Recently, the concept of topology has been introduced to phonon systems, and the nontrivial topological states also exist in phonons due to the constraint by the crystal symmetry of the space group. Although the classification of various topological phonons has been enriched theoretically, experimental studies were limited to several three-dimensional (3D) single crystals with inelastic x-ray or neutron scatterings.

Carbon Nanotube-Directed 7 GPa Heterocyclic Aramid Fiber and Its Application in Artificial Muscles.

Poly(p-phenylene-benzimidazole-terephthalamide) (PBIA) fibers with excellent mechanical properties are widely used in fields that require impact-resistant materials such as ballistic protection and aerospace. The introduction of heterocycles in polymer chains increases their flexibility and makes it easier to optimize the fiber structure. However, the inadequate orientation of polymer chains is one of the main reasons for the large difference between the measured and theoretical mechanical properties of PBIA fibers.

Tunable Interband Transitions in Twisted h-BN/Graphene Heterostructures.

In twisted h-BN/graphene heterostructures, the complex electronic properties of the fast-traveling electron gas in graphene are usually considered to be fully revealed. However, the randomly twisted heterostructures may also have unexpected transition behaviors, which may influence the device performance. Here, we study the twist-angle-dependent coupling effects of h-BN/graphene heterostructures using monochromatic electron energy loss spectroscopy.

Fabricating strong and tough aramid fibers by small addition of carbon nanotubes.

Synthetic high-performance fibers present excellent mechanical properties and promising applications in the impact protection field. However, fabricating fibers with high strength and high toughness is challenging due to their intrinsic conflicts. Herein, we report a simultaneous improvement in strength, toughness, and modulus of heterocyclic aramid fibers by 26%, 66%, and 13%, respectively, via polymerizing a small amount (0.

.

With the development of cryo-electron microscopy (cryo-EM), high-resolution structures of macromolecules can be reconstructed by the single particle method efficiently. However, challenges may still persist during the specimen preparation stage. Specifically, proteins tend to adsorb at the air-water interface and exhibit a preferred orientation in vitreous ice.

Scalable Fabrication of Dual-Function Fabric for Zero-Energy Thermal Environmental Management through Multiband, Synergistic, and Asymmetric Optical Modulations.

Solar heating and radiative cooling techniques have been proposed for passive space thermal management to reduce the global energy burden. However, the currently used single-function envelope/coating materials can only achieve static temperature regulation, presenting limited energy savings and poor adaption to dynamic environments. In this study, a sandwich-structured fabric, composed of vertical graphene, graphene glass fiber fabric, and polyacrylonitrile nanofibers is developed, with heating and cooling functions integrated through multiband, synergistic, (solar spectrum and mid-infrared ranges) and asymmetric optical modulations on two sides of the fabric.

Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers.

Carbon nanotubes (CNTs) are promising building blocks for the fabrication of novel fibers with structural and functional properties. However, the mechanical and electrical performances of carbon nanotube fibers (CNTFs) are far lower than the intrinsic properties of individual CNTs. Exploring methods for the controllable assembly and continuous preparation of high-performance CNTFs is still challenging.

Fluorobenzene and Water-Promoted Rapid Growth of Vertical Graphene Arrays by Electric-Field-Assisted PECVD.

Vertical graphene (VG) arrays show exposed sharp edges, ultra-low electrical resistance, large surface-to-volume ratio, and low light reflectivity, thus having great potential in emerging applications, including field emission, sensing, energy storage devices, and stray light shields. Although plasma enhanced chemical vapor deposition (PECVD) is regarded as an effective approach for the synthesis of VG, it is still challenging to increase the growth rate and height of VG arrays simultaneously. Herein, a fluorobenzene and water-assisted method to rapidly grow VG arrays in an electric field-assisted PECVD system is developed.