Airborne Nanoparticle Release and Toxicological Risk from Metal-Oxide-Coated Textiles: Toward a Multiscale Safe-by-Design Approach.

Nano metal oxides have been proposed as alternatives to silver (Ag) nanoparticles (NPs) for antibacterial coatings. Here, cotton and polyester-cotton fabrics were sonochemically coated with zinc oxide (ZnO) and copper oxide (CuO) NPs. By varying the reaction solvent (water or ethanol), NPs with different sizes and shapes were synthesized.

Toxicity Evaluation of a New Zn-Doped CuO Nanocomposite With Highly Effective Antibacterial Properties.

The increased resistances to conventional antibiotics determine a strong need for new antibacterials, and specific syntheses at the nanoscale promise to be helpful in this field. A novel Zinc-doped Copper oxide nanocomposite (nZn-CuO) has been recently sonochemically synthesized and successfully tested also against multi-drug resistant bacteria. After synthesis and characterization of the physicochemical properties, the new nZn-CuO is here evaluated by the Frog Embyo Teratogenesis Assay-Xenopus test for its toxicological potential and this compared with that of nCuO and nZnO synthesized under the same conditions.

Making the hospital a safer place by sonochemical coating of all its textiles with antibacterial nanoparticles.

The ability to scale-up the sonochemical coating of medical textiles with antibacterial nanoparticles is demonstrated in the current paper. A roll-to-roll pilot installation to coat textiles was built taking into consideration the requirements of the sonochemical process. A long-run experiment was conducted in which 2500 m of fabric were coated with antibacterial ZnO nanoparticles (NPs).

The sonochemical approach improves the CuO-ZnO/TiO(2) catalyst for WGS reaction.

The CuO-ZnO composite was deposited onto two kinds of titania supports, which are synthetic mesoporous TiO2 and commercial TiO2 P25 (Degussa), via the ultrasound assisted precipitation and incipient wetness impregnation (IWI) methods, respectively. The catalysts were tested for WGS reaction in the temperature range of 200-400 °C, and the best catalytic performance was achieved for the sonochemically prepared catalysts supported on the commercial TiO2 P25, which contains well crystallized anatase and rutile phases. Although the synthetic mesoporous TiO2 has a higher surface area, its textural structure is not stable under the reaction conditions, leading to gradual deactivation of the CuO-ZnO/TiO2 catalyst.

Biocidal properties of TiO powder modified with Ag nanoparticles.

Silver nanoparticles (NPs) were synthesized sonochemically by the reduction of silver ions with ethylene glycol and simultaneously deposited on different forms of TiO powders (commercial Degussa P-25, synthetic anatase and mesoporous titania). The Ag-TiO nanocomposites were characterized by X-ray electron diffraction (XRD), transmission electron microscopy (TEM), energy-dispersed X-ray analysis (EDX), UV absorption spectroscopy (UV), Z-potential measurements and electron paramagnetic resonance (EPR). The results demonstrated homogeneous distribution of silver nanoparticles ∼3 nm in size, strongly attached to the surface of titania.

Eradication of multi-drug resistant bacteria by a novel Zn-doped CuO nanocomposite.

Zinc-doped copper oxide nanoparticles are synthesized and simultaneously deposited on cotton fabric using ultrasound irradiation. The optimization of the processing conditions, the specific reagent ratio, and the precursor concentration results in the formation of uniform nanoparticles with an average size of ≈30 nm. The antibacterial activity of the Zn-doped CuO Cu₀.

Encapsulating bioactive materials in sonochemically produced micro- and nano-spheres.

By the early 90s, K. S. Suslick had developed a method using high-intensity ultrasound to make aqueous suspensions of proteinaceous microcapsules filled with water-insoluble liquids.

Proteinaceous microspheres for targeted RNA delivery prepared by an ultrasonic emulsification method.

In the present work we used sonochemically prepared proteinaceous BSA spheres as a novel RNA-delivery system. The preparation of RNA-loaded BSA spheres was accomplished using an environmental friendly method termed the "ultrasonic emulsification method". It was demonstrated that ultrasonic waves do not cause the RNA chains to degrade and the RNA molecules remain untouched.

Releasing dye encapsulated in proteinaceous microspheres on conductive fabrics by electric current.

The current paper reports on the relase properties of conductive fabrics coated with proteinaceous microspheres containing a dye. The release of the dye was achieved by passing an electric current through the fabric. The conductivity of the polyester fibers resulted from nanosilver (Ag NPs) coated on the surface of these fibers.

Fragrance release profile from sonochemically prepared protein microsphere containers.

Protein microspheres have been prepared by sonicating a mixture of pure fragrant oil (amyl acetate (AA)) with an aqueous protein (bovine serum albumin) solution. The prepared protein spheres are nano- to micrometer sized with an encapsulation efficiency of approx. 97% for the AA present on the surface and inside the BSA capsule.

Sonochemical coating of cotton and polyester fabrics with "antibacterial" BSA and casein spheres.

A novel antibacterial coating for cotton and polyester fabrics has been developed by using drug-loaded proteinaceous microspheres made of bovine serum albumin and casein proteins. The microbubbles were created and anchored onto the fabrics (see figure) in a one-step reaction that lasts 3 min. The sonochemically produced "antibacterial fabrics" have been characterized.

Rapid deposition of transparent super-hydrophobic layers on various surfaces using microwave plasma.

We report herein on a very fast and simple process for the fabrication of transparent superhydrophobic surfaces by using microwave (MW) plasma. It was found that the reaction of various organic liquids in MW argon plasma yields hydrophobic polymeric layers on a large assortment of surfaces, including glass, polymeric surfaces, ceramics, metals, and even paper. In most cases, these polymers are deposited as a rough layer composed of 10-15 nm nanoparticles (NPs).

Supported Ru catalysts prepared by two sonication-assisted methods for preferential oxidation of CO in H2.

The preferential oxidation (PROX) of CO in the presence of H(2) is an important step in the production of pure H(2) for industrial applications. In this report, two sonochemical methods (S1 and S2) were used to prepare highly dispersed Ru catalysts supported on mesoporous TiO(2) (TiO(2)(MSP)) for the PROX reaction, in which a reaction gas mixture containing 1% CO + 1% O(2) + 18% CO(2) + 78% H(2) was used. The supported Ru catalysts performed better than the supported Au and Pt catalysts, and the S1 and S2 methods are superior to the impregnation method.

Optimization of bio-diesel production from soybean and wastes of cooked oil: combining dielectric microwave irradiation and a SrO catalyst.

This work offers an optimized method in the transesterification of pristine (soybean) oil and cooked oil to bio-diesel, based on microwave dielectric irradiation as a driving force for the transesterification reaction and SrO as a catalyst. This combination has demonstrated excellent catalytic activity and stability. The transesterification was carried out with and without stirring.

Synthesis of ZnO and Zn nanoparticles in microwave plasma and their deposition on glass slides.

This work represents a new method to synthesis of ZnO and/or Zn nanoparticles by means of microwave plasma whose electrons are the reducing agents. Glass quadratic slides sized 2.5 x 2.

Microspheres of mixed proteins.

This paper describes the synthesis of mixed proteinaceous microspheres (MPMs) by the sonochemical method. The current fundamental research follows the research of Suslick and co-workers who have developed a method by which high-intensity ultrasound is used to make aqueous suspensions of proteinaceous microcapsules filled with water-insoluble liquids.1 By using high-intensity ultrasound, we have synthesized microspheres made of a few different proteins.

In situ sonochemical hydrolysis and deposition of composite layers of ionic liquid entrapped in colloidal silica network and their application as sensors for various gases.

An efficient one-step process for forming uniform solid-like layers of ionic liquid (IL) entrapped in colloidal silica network on interdigitated electrodes (IDE) using ultrasonic deposition is described in this communication. The electrical response of such layers deposited on insulating substrates fitted with interdigitated electrodes was measured upon exposure to different gases (H(2), NO(2), CO, and CH(4)) in air demonstrating reversible and sensitive response at 100 degrees C.

One-step preparation of multifunctional chitosan microspheres by a simple sonochemical method.

Chitosan is a biodegradable natural polymer with great potential for pharmaceutical applications due to its biocompatibility, high charge density, nontoxicity, and mucoadhesion properties. Processing techniques for the preparation of chitosan microspheres have been extensively developed since the 1980s. The present paper describes for the first time a fast and one-step process for the preparation of stable chitosan microspheres by a simple sonochemical method.

Highly Luminescent Zn(x)Cd(1-x)Se/C Core/Shell Nanocrystals: Large Scale Synthesis, Structural and Cathodoluminescence Studies.

Zn(x)Cd(1-x)Se/C core/shell nanocrystals with 31-39 nm semiconducting core and 11-25 nm carbon shell were synthesized from solid state precursors in large scale amounts. A mixture of spherical and tripod nanostructures were obtained only in the one-step reaction (ZC3), where the Zn- and Cd-precursors were reacted simultaneously, rather than in the two step reactions (ZC1 and ZC2), where largely spherical nanostructures were observed. Rietveld analysis of the X-ray diffraction patterns of the samples prepared in three different ways, all under their autogenic pressure, reveal varying compositions of the Zn(x)Cd(1-x)Se nanocrystal core, where the cubic phases with higher Zn content were dominant compared to the hexagonal phases.

Ta2O5 nanobars and their composites: synthesis and characterization.

Novel Ta2O5 nanobars anchored on micron-sized carbon spheres were synthesized by the thermal decomposition of pentaethoxy tantalate, Ta(OEt)5. This one-step reaction was carried out using the RAPET (Reaction Under Autogenic Pressure at Elevated Temperature) method by dissociating Ta(OEt)5 at 800 degrees C for 3 h. The as-prepared Ta2O5/C nanobar-composite was annealed under air at 500 degrees C for 3 h (eliminating the carbon spheres), resulting in neat Ta2O5 nanobars.

One-pot fabrication and magnetic studies of Mn-doped TiO(2) nanocrystals with an encapsulating carbon layer.

Mn-doped TiO(2) nanocrystals encapsulated in a carbon layer (Ti(1-x)Mn(x)O(2)@C) were synthesized by the one-pot RAPET (reaction under autogenic pressure at elevated temperature) technique. Manganese was doped into the body-centered tetragonal TiO(2) anatase phase to give a Mn:Ti atomic ratio of 1%, 5% and 10%. The surface modification by carbon was achieved in order to make the cubic/tetragonal nanocrystals non-toxic and biocompatible.

Sonochemical synthesis under a magnetic field: fabrication of nickel and cobalt particles and variation of their physical properties.

We report on the variation of the physical properties of nickel and cobalt nanoparticles prepared by using ultrasound irradiation as energy source. First, we describe a sonochemical method for preparing aggregated particles. Second, we interpret the results on the basis of Einstein's theory (1905), which deals with a mathematical expression for the diffusivity of particles into solvents.

Synthesis of copper dendrite nanostructures by a sonoelectrochemical method.

Copper dendrites have been prepared by a sonoelectrochemical process from an aqueous solution of Cu(2+) in the presence of polyvinyl alcohol. A SEM image of the morpholohy of the copper formed on the electrode after one electric pulse is presented. A subsequent sonic pulse removes the copper from the electrode surface, cleaning it for the next step.