Research progress of the artificial intelligence application in wastewater treatment during 2012-2022: a bibliometric analysis.

This study identified literatures from the Web of Science Core Collection on the application of artificial intelligence in wastewater treatment from 2011 to 2022, through bibliometrics, to summarize achievements and capture the scientific and technological progress. The number of papers published is on the rise, and especially, the number of papers issued after 2018 has increased sharply, with China contributing the most in this regard, followed by the US, Iran and India. The University of Tehran has the largest number of papers, WATER is the most published journal, and Nasr M has the largest number of articles.

A novel of WS-MoCuO supported with graphene quantum dot as counter electrode for dye-sensitized solar cells application.

A novel tungsten disulfide-molybdenum copper oxide composite supported with graphene quantum dots (WM@GQDs) has been synthesized as a counter electrode (CE) for dye-sensitized solar cells (DSSCs) using a simple and low-cost ultrasonication method. The unique structure of WM@GQDs exhibits excellent power conversion efficiency due to its high catalytic activity and charge transport properties. In addition, the graphene quantum dots (GQDs) provide more active sites in the zero-dimensional materials for an I/I redox reaction which can improve the electrical and optical properties of the composite.

A flexible mesoporous Cu doped FeSn-G-SiO composite based biosensor for microalbumin detection.

A new mesoporous Cu-doped FeSn-G-SiO (CFSGS) based biosensor was developed for the detection of microalbumin in urine samples. The mechanically flexible FeSn modified sensor was fabricated at room temperature. These demonstrations highlight the unexplored potential of FeSn for developing novel biosensing devices.

Experimental investigation and thermodynamic modeling of phase equilibria in the Ag-Ni-Zr ternary system.

The phase equilibria of the Ag-Ni-Zr ternary system were investigated based on the key experiments coupled with thermodynamic modeling. Thirty ternary alloys were prepared to determine the isothermal sections of the Ag-Ni-Zr system at 500, 700 and 900 °C, respectively, by means of X-ray diffraction (XRD) and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM/EDS). Based on the thermodynamic descriptions of three binary systems available in the literature as well as the experimental phase equilibrium data obtained from the present work, ten three-phase regions were determined.

Characterization of Hot Deformation of near Alpha Titanium Alloy Prepared by TiH-Based Powder Metallurgy.

TiH-basd powder metallurgy (PM) is one of the effective ways to prepared high temperature titanium alloy. To study the thermomechanical behavior of near-α titanium alloy and proper design of hot forming, isothermal compression test of TiH-based PM near-α type Ti-5.05Al-3.

Using a two-step method of surface mechanical attrition treatment and calcium ion implantation to promote the osteogenic activity of mesenchymal stem cells as well as biomineralization on a β-titanium surface.

Surface treatment is known as a very efficient measure by which to modulate the surface properties of biomaterials in terms of grain structure, topography, roughness and chemistry to determine the osseointegration of implants. In this work, a two-step method of surface modification was employed to impart high osteogenic activity and biomineralization capacity on a Ti-25Nb-3Mo-2Sn-3Zr alloy (a type of β-titanium named TLM). The preliminary surface mechanical attrition treatment (SMAT) refined the average grain size from 170 ± 19 μm to 74 ± 8 nm in the TLM surface layer and promoted the surface to be much rougher and more hydrophilic.

In-situ hydrothermal synthesis of NiCo alloy particles@hydrophilic carbon cloth to construct corncob-like heterostructure for high-performance electromagnetic wave absorbers.

NiCo alloy particles (NiCo-APs)@hydrophilic carbon cloth (HCC) composites were successfully prepared by uniformly decorating magnetic NiCo-APs on the surface of three-dimensional HCC by employing an in-situ hydrothermal method. The NiCo-APs@HCC composites exhibited a unique corncob-like network structure that helped improve the electromagnetic wave (EMW) absorption performance of composites. The EMW absorption properties of the composites could be controlled by altering the Ni/Co molar ratio.

3D Modeling of Silver Doped ZrO Coupled Graphene-Based Mesoporous Silica Quaternary Nanocomposite for a Nonenzymatic Glucose Sensing Effects.

We described the novel nanocomposite of silver doped ZrO combined graphene-based mesoporous silica (ZrO-Ag-G-SiO,) in bases of low-cost and self-assembly strategy. Synthesized ZrO-Ag-G-SiO were characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDX), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, Nitrogen adsorption-desorption isotherms, X-ray photoelectron spectroscopy (XPS), and Diffuse Reflectance Spectroscopy (DRS). The ZrO-Ag-G-SiO as an enzyme-free glucose sensor active material toward coordinate electro-oxidation of glucose was considered through cyclic voltammetry in significant electrolytes, such as phosphate buffer (PBS) at pH 7.

NiCo alloy/C nanocomposites derived from a Ni-doped ZIF-67 for lightweight microwave absorbers.

In this work, we prepared NiCo alloy/C with rhombic dodecahedron structure and superior microwave absorption performance by using ZIF-67 as the raw material. The rhombic dodecahedron NiCo alloy/C was with rough particles on the surface was photographed by field emission scanning electron microscopy. By adjusting the doping amount of Ni and the temperature of pyrolysis, improved the impedance matching of NiCo alloy/C.

Surface Modification Effect and Electrochemical Performance of LiOH-High Surface Activated Carbon as a Cathode Material in EDLC.

This study aimed to improve the performance of the activated carbon-based cathode by increasing the Li content and to analyze the effect of the combination of carbon and oxidizing agent. The crystal structure and chemical structure phase of Li-high surface area activated carbon material (Li-HSAC) was analyzed by X-ray diffraction (XRD) and Raman spectroscopy, the surface state and quantitative element by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and the surface properties with pore-size distribution by Brunauer-Emmett-Teller (BET), Barrett-Joyner-Halenda (BJH) and t-plot methods. The specific surface area of the Li-YP80F is 1063.

Synthesis of ultralight three-dimensional nitrogen-doped reduced graphene oxide/multi-walled carbon nanotubes/zinc ferrite composite aerogel for highly efficient electromagnetic wave absorption.

Developing light-weight, thin thickness and high-efficiency electromagnetic wave (EMW) absorbers was regarded as an effective strategy for dealing with the increasingly serious problem of electromagnetic radiation pollution. Herein, nitrogen-doped reduced graphene oxide/multi-walled carbon nanotubes/zinc ferrite (NRGO/MWCNTs/ZnFeO) composite aerogel was synthesized via solvothermal followed by hydrothermal and lyophilization processes. Morphological characterization results manifested that the attained ternary composite aerogel displayed unique three-dimensional porous netlike structure, which was composed of partial stack of adjacent NRGO sheets entangled by MWCNTs and decorated with ZnFeO microspheres.