Photo Luminescence and Radiative Carrier Losses in Monolayer Transition Metal Dichalcogenides.

The carrier losses due to radiative recombination in monolayer transition metal dichalcogenides are studied using fully microscopic many-body models. The density- and temperature-dependent losses in various Mo- and W-based materials are shown to be dominated by Coulomb correlations beyond the Hartree-Fock level. Despite the much stronger Coulomb interaction in 2D materials, the radiative losses are comparable-if not weaker-than in conventional III-V materials.

Compact wearable dual-mode imaging system for real-time fluorescence image-guided surgery.

A wearable all-plastic imaging system for real-time fluorescence image-guided surgery is presented. The compact size of the system is especially suitable for applications in the operating room. The system consists of a dual-mode imaging system, see-through goggle, autofocusing, and auto-contrast tuning modules.

Engineering light-emitting diode surgical light for near-infrared fluorescence image-guided surgical systems.

The near-infrared (NIR) fluorescence signal in the 700 to 900 nm from molecular probes used in fluorescence image-guided surgery (FIGS) is usually weak compared to the NIR component from white light-emitting diode surgical light, which is typically switched off during FIGS to enhance the molecular fluorescence contrast of the image. We propose a simple solution to this critical issue in FIGS by removing NIR light from surgical light with a low cost commercial 3M cool mirror film 330.

Oblique incidence reflectometry: optical models and measurements using a side-viewing gradient index lens-based endoscopic imaging system.

A side-viewing, 2.3-mm diameter oblique incidence reflectometry endoscope has been designed to obtain optical property measurements of turbid samples. Light from a single-mode fiber is relayed obliquely onto the tissue with a gradient index lens-based distal optics assembly and the resulting diffuse reflectance profile is imaged and collected with a 30,000 element, 0.

Computerized interferometric surface measurements [Invited].

The addition of electronics, computers, and software to interferometry has enabled enormous improvements in optical metrology. This paper discusses four areas in which computerized interferometric measurement improvements have been made in the measurement of surface shape and surface roughness: (a) The use of computer-generated holograms for the testing of aspheric optics, (b) phase-shifting interferometry for getting interferometric data into a computer so the data can be analyzed, (c) computerized interference microscopes, including multiple-wavelength and coherence scanning, for the precision measurement of surface microstructure, and (d) vibration-insensitive dynamic interferometers for enabling precise measurements in noncontrolled environments.

Ratio images and ultraviolet C excitation in autofluorescence imaging of neoplasms of the human colon.

The accepted screening technique for colon cancer is white light endoscopy. While most abnormal growths (lesions) are detected by this method, a significant number are missed during colonoscopy, potentially resulting in advanced disease. Missed lesions are often flat and inconspicuous in color.

Fluorescence-based surface magnifying chromoendoscopy and optical coherence tomography endoscope.

A side-viewing, 2.3-mm diameter, surface magnifying chromoendoscopy-optical coherence tomography (SMC-OCT) endoscope has been designed for simultaneous, nondestructive surface fluorescence visualization and cross-sectional imaging. We apply this endoscope to in vivo examination of the mouse colon.

Snapshot imaging Mueller matrix polarimeter using polarization gratings.

A snapshot imaging Mueller matrix polarimeter (SIMMP) is theoretically described and empirically demonstrated through simulation. Spatial polarization fringes are localized onto a sample by incorporating polarization gratings (PGs) into a polarization generator module. These fringes modulate the Mueller matrix (MM) components of the sample, which are subsequently isolated with PGs in an analyzer module.

Noise characteristics of heterodyne/homodyne frequency-domain measurements.

We theoretically develop and experimentally validate the noise characteristics of heterodyne and/or homodyne measurements that are widely used in frequency-domain diffusive imaging. The mean and covariance of the modulated heterodyne output are derived by adapting the random amplification of a temporal point process. A multinomial selection rule is applied to the result of the temporal noise analysis to additionally model the spatial distribution of intensified photons measured by a charge-coupled device (CCD), which shows that the photon detection efficiency of CCD pixels plays an important role in the noise property of detected photons.

Ultrahigh resolution all-reflective optical coherence tomography system with a compact fiber-based supercontinuum source.

We report the construction and characterization of an all-reflective optical coherence tomography (OCT) system using a newly developed compact fiber-based broadband supercontinuum source. The use of only reflective optical components has enabled us to avoid chromatic dispersion effects and to obtain ultrahigh resolution OCT images of biological samples. We achieved an axial resolution of 2 μm in air with 87 dB dynamic range at a center wavelength around 1300 nm.

Signal detectability in diffusive media using phased arrays in conjunction with detector arrays.

We investigate Hotelling observer performance (i.e., signal detectability) of a phased array system for tasks of detecting small inhomogeneities and distinguishing adjacent abnormalities in uniform diffusive media.

Optical polarimetry for noninvasive glucose sensing enabled by Sagnac interferometry.

Optical polarimetry is used in pharmaceutical drug testing and quality control for saccharide-containing products (juice, honey). More recently, it has been proposed as a method for noninvasive glucose sensing for diabetic patients. Sagnac interferometry is commonly used in optical gyroscopes, measuring minute Doppler shifts resulting from mechanical rotation.

Nanoamorphous carbon as a blackbody source in plasmonic thermal emitters.

Ag/dielectric/Ag-type plasmonic thermal emitters (PTEs) following a hexagonal lattice were fabricated, and their plasmonic emission spectrums were characterized with Fourier transform infrared spectroscopy. Nanoamorphous carbon (NAC) is used as a dielectric layer. Doping NAC with various materials over a wide range of levels enables control of the resistivity of the composite films where MoSi(2) was selected as the dopant.

Doppler-free spectroscopy of mercury at 253.7 nm using a high-power, frequency-quadrupled, optically pumped external-cavity semiconductor laser.

We have developed a stable, high-power, single-frequency optically pumped external-cavity semiconductor laser system and generate up to 125 mW of power at 253.7 nm using successive frequency doubling stages. We demonstrate precision scanning and control of the laser frequency in the UV to be used for cooling and trapping of mercury atoms.

White-light Sagnac interferometer for snapshot multispectral imaging.

The theoretical and experimental demonstration of a multispectral Sagnac interferometer (MSI) is presented. The MSI was created by including two multiple-order blazed diffraction gratings in both arms of a standard polarization Sagnac interferometer (PSI). By introducing these high-order diffractive structures, unique spectral passbands can be amplitude modulated onto coincident carrier frequencies.

Adjustable adaptive compact fluidic phoropter with no mechanical translation of lenses.

We demonstrate a compact optical phoroptor consisting of adjustable astigmatic and defocus lenses. The lenses are fluidically controlled and allow for an arbitrary refractive error to be corrected without mechanically moving lenses. Shack-Hartmann measurements were used to characterize the optical properties of the individual lenses.

Effect of optical aberration on Gaussian laser speckle.

Optical aberration effects up to the second moment of Gaussian laser speckle are theoretically investigated for both partially and fully developed speckle. In the development, a plane-wave illuminated diffuser generates a phase-perturbed random field in the object plane that creates speckle in the image plane. Theoretical derivations show that image field statistics are generally non-circular Gaussian due to aberrations.

Mueller matrix retinal imager with optimized polarization conditions.

A new Mueller matrix polarimeter was used to image the retinas of normal subjects. Light from a linearly polarized 780 nm laser was passed through a system of variable retarders and scanned across the retina. Light returned from the eye passed through a second system of retarders and a polarizing beamsplitter to two confocal detection channels.

Aberration fields of a combination of plane symmetric systems.

By generalizing the wave aberration function to include plane symmetric systems, we describe the aberration fields for a combination of plane symmetric systems. The combined system aberration coefficients for the fields of spherical aberration, coma, astigmatism, defocus and distortion depend on the individual aberration coefficients and the orientations of the individual plane symmetric component systems. The aberration coefficients can be used to calculate the locations of the field nodes for the different types of aberration, including coma, astigmatism, defocus and distortion.

Continuous-wave all-solid-state 244 nm deep-ultraviolet laser source by fourth-harmonic generation of an optically pumped semiconductor laser using CsLiB6O10 in an external resonator.

We report an all-solid-state laser system that generates over 200 mW cw at 244 nm. An optically pumped semiconductor laser is internally frequency doubled to 488 nm. The 488 nm output is coupled to an external resonator, where it is converted to 244 nm using a CsLiB(6)O(10) (CLBO) crystal.

Optimization of Mueller matrix polarimeters in the presence of error sources.

Methods are presented for optimizing the design of Mueller matrix polarimeters and and in particular selecting the retardances and orientation angles of polarization components to ensure accurate reconstruction of a sample's Mueller matrix in the presence of error sources. Metrics related to the condition number and to the singular value decomposition are used to guide the design process for Mueller matrix polarimeters with the goal of specifying polarization elements, comparing polarimeter configurations, estimating polarimeter errors, and compensating for known error sources. The use of these metrics is illustrated with analyses of two example polarimeters: a dual rotating retarder polarimeter, and a dual variable retarder polarimeter.

Hardware assessment using the multi-module, multi-resolution system (M3R): a signal-detection study.

The multi-module, multi-resolution system (M3R) is used for hardware assessment in objective, task-based signal detection studies in projection data. A phantom capable of generating multiple realizations of a random textured background is introduced. Measured backgrounds from this phantom are used along with simulated lumpy and uniform backgrounds to investigate signal-to-noise ratio as a function of exposure time.

Modeling and optimization for a prismatic snapshot imaging polarimeter.

Thin birefringent prisms placed near an image plane introduce sinusoidal fringes onto a 2D polarized scene making possible a snapshot imaging polarimeter, which encodes polarization information into the modulation of the fringes. This approach was introduced by Oka and Kaneko [Opt. Express 11, 1510 (2003)], who analyzed the instrument through the Mueller calculus.