Biocompatibility and Antibacterial Activity of Eugenol and Copaiba Essential Oil-Based Emulsions Loaded on Cotton Textile Materials.

The present study was focused on the preparation, characterization and application onto cotton fabrics of different topical oil-in-water emulsions based on chitosan, eugenol and copaiba essential oil for potential topical applications. Different amounts of copaiba essential oil (oil phases) and eugenol were used, while the water phase consisted of hamamelis water. The designed formulations were evaluated via optical microscopy and rheological parameters assessment.

The Impact of Biomass Composition Variability on the Char Features and Yields Resulted through Thermochemical Processes.

This paper explores the intricate relations between biomass polymeric composition, thermochemical conversion routes, char yields and features in order to advance the knowledge on biomass conversion processes and customize them to meet specific requirements. An exhaustive characterization has been performed for three types of biomasses: (i) spruce bark, a woody primary and secondary residue from forestry and wood processing; (ii) wheat straws-agricultural waste harvest from arable and permanent cropland; and (iii) vine shoots, a woody biomass resulting from vineyard waste. Chemical (proximate and ultimate analysis), biochemical, trace elements, and thermal analyses were performed.

Copper Ion Removal by Adsorption Using Fly Ash-Based Geopolymers: Process Optimization Insights from Taguchi and ANOVA Statistical Methods.

The present study aimed to use geopolymer materials synthesized from different fly ashes, which are promising for the adsorption of copper ions from aqueous solutions. The characterization of fly ashes and prepared adsorbents was performed by energy-dispersive X-ray spectroscopy (EDS) analysis, Brunauer-Emmett-Teller (BET) surface area analysis, and Scanning Electron Microscopy (SEM). Taguchi and ANOVA methods were used to predict the effect of different working parameters on copper ion removal by prepared geopolymers.

Preliminary Studies about Valorization of Bioactive Content in Modern Dermato-Cosmetic Applications to Combat Skin Oxidative Stress.

The development of products with skin-protective effects has been driven by the increasing incidence of skin diseases that are exacerbated by increasing pollution, urbanization, poor living, working, fatigue, dietary habits, and general treatment. The ability of antioxidants to protect the skin from oxidative stress and its effects makes them one of the most important ingredients in today's cosmetics. This article aims first to characterize the plant extracts obtained from () and then to evaluate the preliminary criteria for a new marketed product: the stability, antioxidant activity, and in vitro behavior of certain serums based on plant extract and hyaluronic acid.

The use of artificial neural networks in studying the progression of glaucoma.

In ophthalmology, artificial intelligence methods show great promise due to their potential to enhance clinical observations with predictive capabilities and support physicians in diagnosing and treating patients. This paper focuses on modelling glaucoma evolution because it requires early diagnosis, individualized treatment, and lifelong monitoring. Glaucoma is a chronic, progressive, irreversible, multifactorial optic neuropathy that primarily affects elderly individuals.

Multi-shell gold nanoparticles functionalized with methotrexate: a novel nanotherapeutic approach for improved antitumoral and antioxidant activity and enhanced biocompatibility.

Methotrexate (MTX) is a folic acid antagonist routinely used in cancer treatment, characterized by poor water solubility and low skin permeability. These issues could be mitigated by using drug delivery systems, such as functionalized gold nanoparticles (AuNPs), known for their versatility and unique properties. This study aimed to develop multi-shell AuNPs functionalized with MTX for the improvement of MTX antitumoral, antioxidant, and biocompatibility features.

Comparative In Vitro Study between Biocompatible Chitosan-Based Magnetic Nanocapsules and Liposome Formulations with Potential Application in Anti-Inflammatory Therapy.

This study describes the comparison between the interaction of a series of peptide-functionalized chitosan-based nanocapsules and liposomes with two cell lines, i.e., mouse macrophages RAW 264.

Bio-Based Materials as a Sustainable Solution for the Remediation of Contaminated Marine Sediments: An LCA Case Study.

Contaminated sediments may induce long-term risks to humans and ecosystems due to the accumulation of priority and emerging inorganic and organic pollutants having toxic and bio-accumulation properties that could become a secondary pollution source. This study focused on the screening of novel bio-based materials to be used in the decontamination of marine sediments considering technical and environmental criteria. It aimed to compare the environmental impacts of cellulose-based adsorbents produced at lab scale by using different syntheses protocols that involved cellulose functionalization by oxidation and branching, followed by structuring of an aerogel-like material via Soxhlet extraction and freeze-drying or their combination.

Efficient phosphate removal utilizing N, Zn-doped carbon dots as an innovative nanoadsorbent.

The primary goal of this study is to examine PO adsorption from aqueous solutions using zinc-doped carbon dots (Zn-N-CDs) as a new adsorbent and cost-effective technique. Zn-N-CDs were produced through a hydrothermal process and subsequently identified using various techniques. The effect of reaction time, temperature, pH, ionic strength, adsorbent dosage, initial PO concentration, and anion competition (NO , Cl, HCO , and SO ) on PO adsorption using Zn-N-CDs were investigated.

Enrofloxacin Pharmaceutical Formulations through the Polymer-Free Electrospinning of β-Cyclodextrin-oligolactide Derivatives.

Enrofloxacin (ENR), a member of the fluoroquinolone class of antibiotics, is widely used in veterinary medicine to treat bacterial infections. Like many antibiotics, ENR has limited water solubility and low bioavailability. To address these challenges, drug formulations using solid dispersions, nanosuspensions, surfactants, cocrystal/salt formation, and inclusion complexes with cyclodextrins may be employed.

Variations in the Thermomechanical and Structural Properties during the Cooling of Shape-Memory R-PETG.

One of the useful features of 3D-printed specimens of recycled polyethylene terephthalate glycol (R-PETG) is the ability to repetitively develop free recovery as well as the work-generating, shape-memory effect. This behavior is enabled by the R-PETG's capacity to stiffen during cooling, thus allowing for a new temporary shape to be induced. Aiming to devise an explanation for the polymer's stiffening, in this study, the variation in some of the R-PETG's parameters during cooling are emphasized and discussed.

Influence of the Plastic Deformation Process on the Residual Stresses and Hardness of an Al-5Mg Alloy.

The service behavior of ductile metallic materials, when they have previously undergone technological plastic deformation, depends on the deformation conditions. These are represented, among others, by the deformation rate, the process temperature, the applied pressures, and the introduced stresses, as well as other process variables. The investigation of the mechanical properties obtained after plastic deformation is an important means that contains two characteristics: on the one hand, to determine to what extent the parameters of the technological manufacturing process influence the main characteristics of the final component; and, on the other hand, on the basis of these characteristics, to analyze whether the component subjected to plastic deformation will be able to function reliably and safely.

A Meta-Analytical Way of Systematizing the Use of Hyaluronan Gels for the Relief of Osteoarthritis, Compared with New Treatment Alternatives.

Hyaluronic acid, in the form of a gel or viscoelastic colloidal solution, is currently used for the viscosupplementation of joints affected by osteoarthritis, but its effectiveness is under debate in relation to newer alternatives. Based on meta-analytical arguments, the present article reinforces the opinion that there are still no decisive arguments for its complete replacement but for its use adapted to the peculiarities of the disease manifestation and of the patients. A "broad" comparison is first made with almost all alternatives studied in the last decade, and then a meta-regression study is performed to compare and predict the effect size induced by viscosupplementation therapy and its main challenger of clinical interest, the platelet-rich plasma treatment.

Experimental and computational assessment of Antiparkinson Medication effects on meiofauna: Case study of Benserazide and Trihexyphenidyl.

Two concentrations (6.25 and 1.25 mg/L) were used for two Parkinson's disease medications, Benserazide, and Trihexyphenidyl, to test their effects on the meiobenthic nematofauna.

The impact of palliative care on the frailty-stroke continuum: from theoretical concepts to practical aspects.

With a constant increase in prevalence and incidence worldwide, stroke remains a public health issue in the 21 century. Additionally, population aging inevitably leads to increased vulnerability in the general population, a clinical state known as frailty. While there are adequate guidelines on the treatment of stroke in the acute setting, there are a lot of gaps regarding the chronic management of stroke patients, particularly the frail ones.

In Vitro and In Vivo Analysis of the Mg-Ca-Zn Biodegradable Alloys.

The objective of this work was to analyze the in vitro and in vivo tests of a novel Mg-based biodegradable alloy-Mg-0.5%Ca-with various amounts of Zn (0.5, 1, 1.

Neuromorphic Sensor Based on Force-Sensing Resistors.

This work introduces a neuromorphic sensor (NS) based on force-sensing resistors (FSR) and spiking neurons for robotic systems. The proposed sensor integrates the FSR in the schematic of the spiking neuron in order to make the sensor generate spikes with a frequency that depends on the applied force. The performance of the proposed sensor is evaluated in the control of a SMA-actuated robotic finger by monitoring the force during a steady state when the finger pushes on a tweezer.

Agriculture 4.0: Polymer Hydrogels as Delivery Agents of Active Ingredients.

The evolution from conventional to modern agricultural practices, characterized by Agriculture 4.0 principles such as the application of innovative materials, smart water, and nutrition management, addresses the present-day challenges of food supply. In this context, polymer hydrogels have become a promising material for enhancing agricultural productivity due to their ability to retain and then release water, which can help alleviate the need for frequent irrigation in dryland environments.

Aging of Superficial Musculoaponeurotic System of the Face-Novel Biomarkers and Micro-CT Relevance of Facial Anti-Gravity Support.

The soft superficial tissues of the face are against gravity through an intricate network of ligaments and ligamentous attachments. The aim of this investigation is to delineate the relationship between the muscular, fibrous, and vascular components of the superficial musculoaponeurotic system of the face (SMAS) at the level of its periosteal fixation areas from advanced radiological and novel biomarkers' perspectives. These areas represent key points underlying skin aging and the longevity of restorative surgery results.

The Potential Valorization of Corn Stalks by Alkaline Sequential Fractionation to Obtain Papermaking Fibers, Hemicelluloses, and Lignin-A Comprehensive Mass Balance Approach.

The current study deals with an examination of strategies for the sequential treatment of corn stalks (CSs) in an integrated manner aiming to obtain papermaking fibers and to recover both lignin and hemicelluloses (HCs). Several pathways of valorization were experimentally trialed, focusing on getting information from mass balance analysis in an attempt to reveal the potential outcomes in terms of pulp yield, chemical composition, and papermaking properties such as tensile and burst strength. The raw lignin amounts and purity as well as separated hemicelluloses were also characterized.

The Influence of Cyclic Thermal Shocks at High Temperatures on the Microstructure, Hardness and Thermal Diffusivity of the Rene 41 Alloy.

The precipitation-hardenable nickel-based superalloy Rene 41 exhibits remarkable mechanical characteristics and high corrosion resistance at high temperatures, properties that allow it to be used in high-end applications. This research paper presents findings on the influence of thermal shocks on its microstructure, hardness, and thermal diffusivity at temperatures between 700 and 1000 °C. Solar energy was used for cyclic thermal shock tests.

Analysis of Chemical, Microstructural and Mechanical Properties of a CuAlBe Material Regarding Its Role as a Non-Sparking Material.

We developed and analyzed a novel non-sparking material based on CuAlBe for applications in potentially explosive environments. Using a master alloy of CuBe, an established material for anti-sparking tools used in oil fields, mines, or areas with potentially explosive gas accumulations, and pure Al, we used an Ar atmosphere induction furnace to obtain an alloy with ~10 wt% Al and ~2 wt% Be percentages and good chemical and structural homogeneity. The new material was tested in an explosive gaseous mixture (10% H or 6.

Spinal Cord Injury Management Based on Microglia-Targeting Therapies.

Spinal cord injury is a complicated medical condition both from the clinician's point of view in terms of management and from the patient's perspective in terms of unsatisfactory recovery. Depending on the severity, this disorder can be devastating despite the rapid and appropriate use of modern imaging techniques and convenient surgical spinal cord decompression and stabilization. In this context, there is a mandatory need for novel adjunctive therapeutic approaches to classical treatments to improve rehabilitation chances and clinical outcomes.