Growth and adherence on stainless steel by Enterococcus faecium cells.

Enterococcus faecium isolated from Brazilian raw milk was used in this study. For growth studies, E. faecium was inoculated into 10% RSM (reconstituted skim milk) and MRS both, incubated at 6.5 and 9 degrees C for 10 days and at 30, 42, and 45 degrees C for 48 h. Cells were enumerated after spread-plating onto MRS agar and incubating at 30 degrees C for 48 h. The ability of E. faecium cells to adhere to stainless-steel chips (6 by 6 by 1 mm, AISI 304, finish #4) was investigated. MRS broth containing stainless steel chips was inoculated to an initial concentration of 10(3) or 10(6) CFU/ml of E. faecium. Adherent cells were stained with acridine orange and enumerated by epifluorescence microscopy. E. faecium grew between 6.5 and 42 degrees C in MRS and between 9 and 40 degrees C in RSM. In MRS broth with 10(6) or 10(3) CFU/ml, the g (generation time) values were 0.62 and 0.42 h and R (growth rate) values were 1.6 and 2.4 h-1. Values of R = 2.3 h-1 and g = 0.43 h were determined for E. faecium growing in RSM with 10(3) CFU/ml. In MRS broth, for samples with a starting concentration of 10(6) cells per ml, adherence to stainless-steel chips was first observed at 2 h. However, adherence was first observed at 4 h in samples with an initial concentration of 10(3) cells per ml. After 10 h of exposure the number of adherent cells was similar for all samples regardless of initial inoculum. These results indicate that E. faecium readily adheres to stainless steel. It also underscores the need to control E. faecium by using appropriate low storage temperatures and adequate sanitizing practices in the dairy industry.