Validation of quantitative backscattered electron imaging for the measurement of mineral density distribution in human bone biopsies.

Bone

Ludwig Boltzmann-Institut für Osteologie, 4. Medizinische Abteilung, Hanusch Krankenhaus und Unfallkrankenhaus Meidling, Wien, Austria.

Published: October 1998

The measurement of bone mineral density (BMD) using X-rays is usually employed to monitor the mineral content in a given portion of bone. However, this method cannot differentiate between changes in bone volume or in degree of mineralization of the bone matrix. In contrast to BMD, bone mineral density distribution (BMDD), as measured on bone sections by quantitative backscattered electron imaging (qBEI), is able to distinguish differences in the degree of mineralization. For routine clinical research, we have validated the method of calibration and standardization of the backscattered electron (BE) signal. Carbon and aluminum were used as reference materials for BE gray levels and osteoid and apatite for calcium concentration. Experiments were performed to get knowledge about precision (intraassay variance-instrumental stability and interassay variance-reproducibility) and accuracy (standardization) of this method as well as the biological variance (intraindividual and interindividual) in human bone. On transiliac biopsies or necropsies from 20 individuals having had accidental death (13 females, 7 males, age 30-85 years) BMDD measurements were conducted. The patients' medical history as well as the histomorphology of these bones showed no evidence of metabolic bone disease. For instance, the standard deviations of the weighted mean calcium concentrations were <0.3%, <0.4%, <0.9%, and <2.6% of the mean for the intraassay, interassay, intraindividual, and interindividual variations, respectively. In addition, a mean BMDD histogram for transiliac bone specimens was calculated from the 20 aforementioned individuals. The method used allows detection of the degree of mineralization independently from the actual bone volume, a result that seems to be of special interest in the assessment of the effect of treatments for osteoporosis. The power of this technique is demonstrated by using bone from a patient with a metabolic bone disease. In this case of osteomalacia due to celiac disease, the mean calcium concentration in the bone matrix was reduced by 19.3% as compared with normal.

Download full-text PDF

Source
http://dx.doi.org/10.1016/s8756-3282(98)00112-4DOI Listing

Publication Analysis

Top Keywords

backscattered electron
12
mineral density
12
bone
9
quantitative backscattered
8
electron imaging
8
density distribution
8
human bone
8
bone mineral
8
degree mineralization
8
validation quantitative
4

Similar Publications

Titanium Oxide Formation in TiCoCrFeMn High-Entropy Alloys.

Materials (Basel)

January 2025

Faculty of Advanced Technologies and Chemistry, Military University of Technology, Sylwestra Kaliskiego 2, 00-908 Warsaw, Poland.

High-entropy materials, characterized by complex chemical compositions, are difficult to identify and describe structurally. These problems are encountered at the composition design stage when choosing an effective method for predicting the final phase structure of the alloy, which affects its functional properties. In this work, the effects of introducing oxide precipitates into the matrix of a high-entropy TiCoCrFeMn alloy to strengthen ceramic particles were studied.

View Article and Find Full Text PDF

Laser shock peening (LSP) is an effective method for enhancing the fatigue life and mechanical properties of Ti alloys. However, there is limited research on the effects of LSP on crystal structure and dislocation characteristics. In this study, Ti-6Al-4V alloy was subjected to laser shock peening with varying laser power levels.

View Article and Find Full Text PDF

Effects of Pre-Deformation in Corrosion Fatigue Crack Growth of Al-Mg-Zn Alloy.

Materials (Basel)

January 2025

State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha 410083, China.

This study investigated the effect of pre-deformation on the corrosion fatigue crack propagation (CFCG) of Al-Mg-Zn alloy in a corrosive environment. Tensile tests at different pre-deformation levels and molecular dynamics simulations analyzed changes in dislocation density. Corrosion fatigue experiments were conducted in a 3.

View Article and Find Full Text PDF

Bilayer TiO/Mo-BiVO Photoelectrocatalysts for Ibuprofen Degradation.

Materials (Basel)

January 2025

Section of Condensed Matter Physics, Department of Physics, National and Kapodistrian University of Athens, University Campus, 15784 Athens, Greece.

Heterojunction formation between BiVO nanomaterials and benchmark semiconductor photocatalysts has been keenly pursued as a promising approach to improve charge transport and charge separation via interfacial electron transfer for the photoelectrocatalytic degradation of recalcitrant pharmaceutical pollutants. In this work, a heterostructured TiO/Mo-BiVO bilayer photoanode was fabricated by the deposition of a mesoporous TiO overlayer using the benchmark P25 titania catalyst on top of Mo-doped BiVO inverse opal films as the supporting layer, which intrinsically absorbs visible light below 490 nm, while offering improved charge transport. A porous P25/Mo-BiVO bilayer structure was produced from the densification of the inverse opal underlayer after post-thermal annealing, which was evaluated on photocurrent generation in aqueous electrolyte and the photoelectrocatalytic degradation of the refractory anti-inflammatory drug ibuprofen under back-side illumination by visible and UV-Vis light.

View Article and Find Full Text PDF

Friction-stir-welded dissimilar AA2024/AA7075 joints have an apparent influence on grain and texture development at the weld interface due to differences in physical and chemical properties between the two aluminum alloys. In this work, the effect of tool shoulder profile on grain structure and texture evolution in the center interface zone (CIZ) and bottom interface zone (BIZ) of dissimilar AA2024/AA7075 joints were quantitatively studied by electron back-scattering diffraction (EBSD). The results indicate that abundant fine and coarse equiaxial grains are produced in the CIZ and BIZ of the joints produced with a concentric circle shoulder (CCS) and three-helix shoulder (THS), and the average grain size of the BIZ is lower than that of the CIZ for the same CCS or THS joint.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!