The adsorption of carbon monoxide and carbon dioxide (CO and CO2) on a number of specially prepared alpha-Fe2O3 samples was measured gravimetrically at 25°C. The samples were prepared from a steel-pickling waste (97 wt% FeSO4·7H2O) by roasting the original material at 700°C for 5 h in air, oxygen, and nitrogen. Estimated surface coverages by the adsorbed CO and CO2 were made on the basis of nitrogen-adsorption-based surface areas, while the nature of the sample surfaces was investigated by both X-ray photoelectron spectroscopy (XPS) and field emission SEM (FESEM) techniques. In addition a depth profiling study utilizing a sputtering argon beam and XPS was undertaken. Morphological studies using FESEM showed that neither CO nor CO2 caused any significant structural changes. The nature of the resultant alpha-Fe2O3 sample surfaces differed, with the degree of oxygenation decreasing in the order of preparatory gases: oxygen, (wet) air, nitrogen [IP(O), IP(A), and IP(N)]. The amounts of both CO and CO2 adsorbed decreased in the sample order IP(A) > IP(O) > IP(N), though in the case of CO adsorption, the amounts adsorbed on IP(A) and IP(O) were not greatly different. In all cases the amounts adsorbed represented only fractional coverage. Adsorption of the more acidic CO2 is thought to be favored more by basic Ox-2 than by O2- sites on both IP(O) and IP(A), but with surface hydroxyl groups also playing a role (particularly on IP(A)). The CO2 adsorption should result in the formation of mono-, di-, and polydentate carbonate and bicarbonate species, with increasing degassing temperatures favoring the polydentate species and the decomposition of the bicarbonate and carbonate to form undissociated CO2. The adsorption of CO (a weak base) is postulated to take place on strong Lewis acid, highly coordinated, metal sites to form metal carbonyl species, on strong base sites (O2-) to form carbonite, oxalate, and ketenic species, and, to a lesser degree, on surface hydroxyl groups to form formyl and formate species. Copyright 1997 Academic Press. Copyright 1997Academic Press
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1006/jcis.1997.5128 | DOI Listing |
Environ Res
January 2025
Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China; CAS Key Laboratory of Renewable Energy, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of High-Quality Recycling of End-of-Life New Energy Devices, Guangzhou 510640, China. Electronic address:
Hydrogen sulfide (HS) is a major air pollutant posing a serious threat to both the environment and public health. In this study, a novel nitrogen-rich biocarbon that effectively removes HS was produced from a mixture of sewage sludge and pine sawdust using melamine as nitrogen source. Compared with pristine biocarbons, nitrogen (N)-doped biocarbons possessed an adjustable porosity, e.
View Article and Find Full Text PDFJ Colloid Interface Sci
January 2025
School of Chemistry, Sun Yat-sen University, Guangzhou 510275, Guangdong, China. Electronic address:
Syngas has important industrial applications, and converting CO to CO is critical for syngas production. Metal-organic frameworks (MOFs) have demonstrated significant potential in photocatalytic syngas conversion, although the impact of catalytic reactions on tunable H/CO ratios remains unclear. Herein, we present a novel bimetallic NiCo-MOF catalyst, NiCo, exhibiting high catalytic activity in syngas conversion due to the CO product self-driven effect.
View Article and Find Full Text PDFAdv Mater
January 2025
State Key Laboratory of Petroleum Molecular & Process Engineering, Shanghai Key Laboratory of Green Chemistry and Chemical Processes, School of Chemistry and Molecular Engineering, East China Normal University, Shanghai, 200062, China.
Copper-based electrocatalysts are recognized as crucial catalysts for CO electroreduction into multi-carbon products. However, achieving copper-based electrocatalysts with adjustable valences via one-step facile synthesis remains a challenge. In this study, Cu/CuO heterostructure is constructed by adjusting the anion species of the Cu ions-containing electrolyte during electrodeposition synthesis.
View Article and Find Full Text PDFMolecules
December 2024
LAQV/REQUIMTE, Associated Laboratory for Green Chemistry, Department of Chemistry, NOVA School of Science and Technology, NOVA University Lisbon, 2829-516 Caparica, Portugal.
This paper investigates the use of spent tyre rubber as a precursor for synthesising adsorbents to recover rare earth elements. Through pyrolysis and CO activation, tyre rubber is converted into porous carbonaceous materials with surface properties suited for rare earth element adsorption. The study also examines the efficiency of leaching rare earth elements from NdFeB magnets using optimised acid leaching methods, providing insights into recovery processes.
View Article and Find Full Text PDFSci Rep
January 2025
Thermodynamics Research Laboratory, School of Chemical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran.
This study investigates the pyrolysis mechanism of cellulose using reactive molecular dynamics simulations to prepare biochars for CO separation applications. Six biochars with densities ranging from 0.160 to 0.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!