The increased use of soda lime for low flow anaesthesia leads to some problems related to the interaction with halogenated agents. These agents may be absorbed by soda lime or degradated according to their water content. Halothane and enflurane, in contact with soda lime, produce some metabolites, but their concentration is low when compared to their own lethal concentration. Sevoflurane degradates to four compounds. Compound A may reach a value between 13.3-42.1 ppm in the inspired fraction: these values are 50-100 times lower than the toxic concentrations. Isoflurane and desflurane are degradable at very low extent. Some case reports of unexpected high carboxyhemoglobin levels during anaesthesia indicate the possibility of CO production from soda lime and baralyme when halogenated agents are used. This reaction occurs only with anaesthetics containing CHF2-moiety (isoflurane, enflurane and desflurane) and when some specific factors make soda lime or baralyme completely dry. Low flow anaesthesia preserves the moisture content of the soda lime and protects from carbon monoxide production, by increasing water content in the circle.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
The Effect of H Fluence Irradiation on the Optical, Structural, and Morphological Properties of ZnO Thin Films.
Materials (Basel)
December 2024
Departamento de Física, Facultad de Ciencias, Universidad Nacional Autónoma de México, Ciudad de México 04510, Mexico.
Polycrystalline zinc oxide (ZnO) thin films were deposited on soda-lime glass substrates using the chemical spray pyrolysis method at 450 °C. The samples were irradiated with 8 keV H ions at three different fluences using a Colutron ion gun. The effects of the irradiation on the structural, morphological, and optical properties were studied with different techniques, including Rutherford Backscattering Spectrometry (RBS), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Ultraviolet and Visible Spectroscopy (UV-Vis).
View Article and Find Full Text PDFPurpose: This study aims to compare the surface roughness (SR), contact angle (CA), surface free energy (SFE), and bacterial adhesion of resin-based materials used in additive, subtractive, and conventional manufacturing techniques.
Materials And Methods: This study involved four groups of 23 specimens: Indirect conventional resin composite (ICRC), subtractively manufactured resin composite (SMRC), additively manufactured resin composite (AMRC), and soda-lime-silica glass (SLSG). One specimen per group was analyzed by Energy Dispersive X-ray Spectroscopy (EDS) before polishing.
An Unusual Incident of "Cannot Ventilate" Situation Due to a Broken Soda Lime Canister: A Case Report.
A A Pract
December 2024
From the Department of Anesthesiology and Critical Care, All India Institute of Medical Sciences (AIIMS), Rishikesh, Uttarakhand, India.
The circle breathing system enables rebreathing using a carbon dioxide absorbent. This case report presents a rare incident of ventilation failure in a 30-year-old male patient due to a broken unidirectional valve in a soda lime canister. Despite the anesthesia machine passing automated checks, a mechanical blockage from caked soda lime in the inner inspiratory chamber led to insufficient tidal volume delivery.
View Article and Find Full Text PDFCO removal from biogas improved stable treatment of low-alkalinity municipal wastewater using anaerobic membrane bioreactor.
Bioresour Technol
January 2025
Department of Civil and Environmental Engineering, Graduate School of Engineering, Tohoku University, 6-6-06 Aramaki Aza Aoba, Aoba-ku, Sendai, Miyagi, 980-8579, Japan; Department of Frontier Sciences for Advanced Environment, Graduate School of Environmental Studies, Tohoku University, 6-6-20 Aoba, Aramaki-Aza, Sendai, Miyagi 980-8579, Japan. Electronic address:
This study addressed a less-reported issue: the insufficient alkalinity encountered when anaerobic membrane bioreactors (AnMBRs) are used to treat municipal wastewater (MWW). In the present study, a 20-L AnMBR was initiated at an MWW treatment plant. During the initial startup, a continuous decrease in pH was observed.
View Article and Find Full Text PDFNew experimental methodology for determining the second crossover energy in insulators under stationary e-irradiation in a SEM.
Ultramicroscopy
January 2025
LaMaCoP, University of Sfax, Soukra Street Km 3, PO Box 1171, 3000 Sfax, Tunisia. Electronic address:
A new experimental methodology is proposed which uses the electrostatic influence method (EIM) in scanning electron microscope (SEM) in order to estimate the second crossover energy E for uncharged insulators. This experimental methodology based on simultaneous time measurement of the displacement and leakage currents, is approached to the short pulse irradiation technique but under stationary e-irradiation and allows determining the intrinsic secondary electron emission yield, σ (σ is the value of the total secondary electron yield just at the beginning of the irradiation before significant charge accumulation or before the formation of a surface potential). The obtained value of E for soda-lime glass is confirmed by two additional experiments based on secondary electron imaging.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!