[Size estimation method for patch used in reconstruction of LV cavity].

The reconstruction of LV cavity is accomplished by suturing a patch to the viable myocardium to exclude the infarcted area from the high LV pressures. However, there is no clear guideline to estimate the size of patch used for LV reconstruction. We have designed a new method to determine the correct patch size, and applied it in 5 cases. The suture line of the patch is at the junction of contractile (functional) and infarcted portions of LV. The patch size is determined by the length of AB, termed "a", as the base, where "point A" represents the junction on the LV anterior wall side, and "point B" the junction of the LV posterior wall side, from RAO 30 degrees projection of the left ventriculogram obtained by cardiac catheterization. In LV aneurysm, we designed the patch in the range of a/2 < l < or = pi a/2, where patch length on RAO 30 degrees is considered "l". An effort was made to reconstruct to normalize LV volume and contour by designing the patch size to be a/2 < l < a, particularly when the contractile portion was enlarged by aneurysm. On the other hand, in post AMI VSD, LV contractile portion is not enlarged in early stage. Therefore, the patch was designed in the range of a < l < or = pi a/2 to maintain LV volume. Postoperative LV volume can be calculated prior to surgery, by using the lengths of the designed patch. Postoperative analysis indicated that the actual LV volume and contour were almost identical to our estimation. This method is very useful in planning the patch size for LV reconstruction.