Background And Aims Of The Study: Air embolism during open heart surgery seems to be a common occurrence and may be responsible for neuropsychological deficit or myocardial damage.

Material And Methods: Forty-two consecutive patients undergoing valvular surgery were studied using the long axis view of the heart by two dimensional transesophageal echocardiography (TEE). The patients were randomized into two groups of 21 each. In group 1, the routine air evacuation method was used. In group 2, the same air evacuation method was used and controlled with a Doppler ultrasonic probe adjusted around the root of the aorta. At the end of air evacuation, intracardiac microbubbles and retained air were analyzed with TEE and when air was founded, its location was communicated to the surgeons who tried to remove it by shaking the heart and tilting the operating table for 15 minutes. The patients were assessed for detection of cardiac or neurological postoperative complications.

Results: The incidences of microbubbles and retained air were 57% and 43% in group 1, and 62% and 38% in group 2 respectively (ns). The mean grade of microbubbles was lower in group 2: 1.4 +/- 0.8 vs. 2.2 +/- 0.9, p < 0.05. TEE allowed to significantly decrease (p < 0.05) retained air and mean grade of microbubbles to 14% and 1.3 +/- 0.8 in group 1, and to 10% and 0.8 +/- 0.8 in group 2, without statistical difference between the two groups. Despite the help of TEE, manual attempts to eradicate retained air were unsuccessful in five patients (three in group 1, two in group 2).

Conclusions: The use of aortic ultrasonic probe allowed to reduce the amount of microbubbles. TEE was a useful tool not only for the detection of retained air but also for locating it, and guiding the procedure to eliminate it.

Download full-text PDF

Source

Publication Analysis

Top Keywords

retained air
20
air evacuation
12
air
10
group
9
valvular surgery
8
transesophageal echocardiography
8
evacuation method
8
ultrasonic probe
8
microbubbles retained
8
grade microbubbles
8

Similar Publications

Preparation of nitrogen-doped biocarbon from sewage sludge and pine sawdust for superior hydrogen sulfide removal: Experimental and DFT studies.

Environ Res

January 2025

Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China; CAS Key Laboratory of Renewable Energy, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of High-Quality Recycling of End-of-Life New Energy Devices, Guangzhou 510640, China. Electronic address:

Hydrogen sulfide (HS) is a major air pollutant posing a serious threat to both the environment and public health. In this study, a novel nitrogen-rich biocarbon that effectively removes HS was produced from a mixture of sewage sludge and pine sawdust using melamine as nitrogen source. Compared with pristine biocarbons, nitrogen (N)-doped biocarbons possessed an adjustable porosity, e.

View Article and Find Full Text PDF
Article Synopsis
  • Recent research highlights the potential of polyhydroxyalkanoates (PHAs), especially poly(3-hydroxybutyrate) (P3HB), for creating fine fiber nonwoven structures, with fiber diameters ranging from 2.5 µm to 20 µm through the meltblow process.
  • The study identifies limitations in existing PHA fabrics, such as brittleness and low flexibility, but shows how advancements in their processing can lead to stable three-dimensional nonwoven parts.
  • It also reveals that the PHA copolymer poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) demonstrates improved elongation properties and resilience compared to P3HB, especially
View Article and Find Full Text PDF

High-performance and cost-effective hole-collecting materials (HCMs) are indispensable for commercially viable perovskite solar cells (PSCs). Here, we report an anchorable HCM composed of a triazatruxene core connected with three alkyl carboxylic acid groups (). In contrast to the phosphonic acid-containing tripodal analog (), molecules can form a hydrophilic monolayer on a transparent conducting oxide surface, which is beneficial for subsequent perovskite film deposition in the traditional layer-by-layer fabrication process.

View Article and Find Full Text PDF

The plane running between two adjacent pulmonary segments consists of a very thin layer of connective tissue through which the pulmonary vein also runs. To perform an anatomically correct segmentectomy, this segmental plane needs to be divided. Before the operation, the locations of vessels and bronchi are confirmed by three-dimensional computed tomography.

View Article and Find Full Text PDF

A Chain Entanglement Gelled SnO₂ Electron Transport Layer for Enhanced Perovskite Solar Cell Performance and Effective Lead Capture.

Adv Mater

January 2025

School of Chemistry and Chemical Engineering, Ministry of Education Key Laboratory of Special Functional Aggregated Materials, Shandong Key Laboratory of Advanced Organosilicon Materials and Technologies, Shandong University, Jinan, 250100, China.

SnO₂ is a widely used electron transport layer (ETL) material in perovskite solar cells (PSCs), and its design and optimization are essential for achieving efficient and stable PSCs. In this study, the in situ formation of a chain entanglement gel polymer electrolyte is reported in an aqueous phase, integrated with SnO₂ as the ETL. Based on the self-polymerization of 3-[[2-(methacryloyloxy)ethyl]dimethylammonium]propane-1-sulfonic acid (DAES) in an aqueous environment, combining the catalytic effect of LiCl (as a Lewis acid) with the salting-out effect, and the introduction of polyvinylpyrrolidone (PVP) as the other polymer chain, a chain entanglement gelled SnO (G-SnO) structure is successfully constructed with a wide range of functions.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!