Objective: To study biomechanical characteristics of the normal and surgically altered canine thoracolumbar vertebral column to determine the effects of surgery and trauma on lateral stability.
Animals: The T13-L1 vertebral motion units of 48 mixed-breed dogs were dissected free of surrounding musculature and prepared for biomechanical testing by cross-pinning the vertebral bodies and mounting in polymethylmethacrylate.
Procedure: Normal and surgically altered spinal specimens were subjected to lateral bending. The mean slope of the bending moment versus angular displacement curve and the load to failure were compared between treatment groups and significance was determined by the method of least squares (P < 0.05). Specimens were surgically altered by facetectomy, lateral fenestration, diskectomy, and combinations of these procedures. Each specimen was subjected to lateral bending to failure at a rate of 2.5 cm/min in a swing arm bending jig designed to simulate 4-point bending and subject the specimen to pure bending.
Results: Only specimens undergoing diskectomy had a significant decrease in slope and load at failure. Unilateral and bilateral facetectomies and fenestration induced a nonsignificant decrease in stiffness, compared with control specimens.
Conclusions: Fenestrations and facetectomies do not appear to increase the risk of injury to the canine thora-columbar spinal cord during lateral bending.
Clinical Relevance: Fenestrations and facetectomies, as used in routine laminectomies, may be performed without concern for significant destabilization of the spine in lateral bending; however, it is possible that thoracolumbar spinal fractures involving only the vertebral body may significantly destabilize the spine in all modes of bending.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Quasi-static and dynamic compression behavior of stacked pyramidal lattice structures with I-beam struts.
Sci Rep
January 2025
Department of Mechanical and Nuclear Engineering, Khalifa University of Science & Technology, Abu Dhabi, UAE.
This study investigates the quasi-static and dynamic compression performance of a newly designed stacked pyramidal lattice (SPL) structure composed of struts that resemble I-beams. These novel lattice structures are 3D-printed considering three different stacking sequences, and their stiffness, strength, and energy absorption properties are experimentally assessed through low-velocity impact (1.54 m/s) and quasi-static compression tests.
View Article and Find Full Text PDFDevelopment and biomechanical evaluation of a 3D printed analogue of the human lumbar spine.
3D Print Med
January 2025
Musculoskeletal Biomechanics Research Lab, Department of Mechanical Engineering, McGill University, 845 Sherbrooke St. W (163), Montréal, QC, H3A 0C3, Canada.
Background: There exists a need for validated lumbar spine models in spine biomechanics research. Although cadaveric testing is the current gold standard for spinal implant development, it poses significant issues related to reliability and repeatability due to the wide variability in cadaveric physiologies. Moreover, there are increasing ethical concerns with human dissection practices.
View Article and Find Full Text PDFA hydrodynamic antenna: novel lateral line system in the tail of myliobatid stingrays.
Proc Biol Sci
January 2025
Department of Organismic and Evolutionary Biology, Harvard University, 26 Oxford Street, Cambridge, MA 02138, USA.
Eagle rays, cownose rays and manta rays (order Myliobatiformes) have a slender tail that can be longer than the animal's body length, but its function and structure are unknown. Using histology, immunohistochemistry and three-dimensional imaging with micro-computed tomography scans, we describe the anatomy and function of the tail in , the cownose ray. The tail is an extension of the vertebral column with unique morphological specializations.
View Article and Find Full Text PDFUnilateral Lumbo-Pelvic Fixation for Denis Type I Unilateral Sacral Fracture: A Finite Element Analysis.
JOR Spine
March 2025
Department of Trauma Surgery, Orthopaedics and Plastic Surgery University Medical Center Göttingen Göttingen Germany.
Background: Unilateral sacral fractures with posterior ring instability represent a prevalent type of posterior pelvic ring fracture. While lumbo-pelvic fixation is recognized as a highly stable method, the sufficiency of unilateral lumbo-pelvic fixation (ULF) for such fractures remains under debate.
Purpose: This study aims to assess the biomechanical stability of ULF compared to traditional bilateral lumbo-pelvic fixation (BLF) and triangular osteosynthesis (TO), incorporating clinical observations, and previous biomechanical data.
Comparing the Hip and Lumbar Joint Range of Motion in Patients With Lower Lumbar Disc Herniation and Healthy Subjects.
J Sport Rehabil
January 2025
Department of Physiotherapy, School of Paramedical and Rehabilitation Sciences, Mashhad University of Medical Sciences, Mashhad, Iran.
Background: One possible factor contributing to low back pain is hip range of motion (ROM). However, there is inconstancy in published studies, which may be due to the heterogeneity of patients. Therefore, the present study focuses on the relationship between hip ROM and lower lumbar disc herniation (LLDH).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!