Depending on the size of the prepared tooth spark eroded and milled, Procera crowns (Nobelpharma AB, Göteborg, Sweden) are manufactured from one of five diameters of pure titanium rods. In this study microindentation hardness tests were performed on the outer 400 microns and center of 10 samples for each type of rod. Five tensile samples were also machined for each of the diameters and tested in tension in a universal testing machine. Cast titanium samples were similarly prepared and tested. Some significant differences in hardness and considerable differences in strength and ductility were identified between the prefabricated rods. In comparison, cast titanium was significantly harder and stronger but less ductile.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/s0022-3913(96)90035-9 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Gelatin Multiwalled Carbon Nanotube Composite 3D Printed Semi Biological Mesh for Abdominal Hernia Treatment.
Chem Asian J
January 2025
Indian Institute of Technology Ropar, Biomedical Engineering, Department of Biomedical Engineering, IIT Ropar, Main Campus, India, 140001, Ropar, INDIA.
Hernia is characterized by the protrusion of organs or tissue through weakened areas in the abdominal cavity wall. A common treatment for hernia involves the implantation of a mesh which promotes the growth of new tissue around or within the implanted material in the damaged area. The mesh is typically made from synthetic materials like polypropylene.
View Article and Find Full Text PDFHighly printable, strong, and ductile ordered intermetallic alloy.
Nat Commun
January 2025
Department of Materials Science and Engineering, College of Engineering, City University of Hong Kong, Hong Kong, China.
Ordered intermetallic alloys are renowned for their impressive mechanical, chemical, and physical properties, making them appealing for various fields. However, practical applications of them have long been severely hindered due to their severe brittleness and poor fabricability. It is difficult to fabricate such materials into components with complex geometries through traditional subtractive manufacturing methods.
View Article and Find Full Text PDFMultiscale Numerical Study of Enhanced Ductility Ratios and Capacity in Carbon Fiber-Reinforced Polymer Concrete Beams for Safety Design.
Polymers (Basel)
January 2025
Department of Civil and Environmental Engineering, Ben-Gurion University of the Negev, Beer Sheva 8410501, Israel.
Rigid reinforced concrete (RC) frames are generally adopted as stiff elements to make the building structures resistant to seismic forces. However, a method has yet to be fully sought to provide earthquake resistance through optimizing beam and column performance in a rigid frame. Due to its high corrosion resistance, the integration of CFRP offers an opportunity to reduce frequent repairs and increase durability.
View Article and Find Full Text PDFResonance Frequency as an Indicator of the Damage in Carbon Composite Plates: Analysis on Composites Prepared with Conventional and Sustainable Resins Subjected to Impact Tests.
Polymers (Basel)
January 2025
Department of Mechanical and Aerospace Engineering, Politecnico di Torino, 10129 Turin, Italy.
This paper experimentally investigates the impact response of composite laminates made with conventional and bio-based epoxy resin. Drop tower impact tests were conducted at varying energy levels, including repeated low-energy impacts, to evaluate perforation resistance. The laminates' residual strength and damage tolerance were assessed using the Damage Index (DI) and by analysing the resonance frequency variations through the Impulse Excitation Technique (IET).
View Article and Find Full Text PDFEffect of Hydride Types on the Fracture Behavior of a Novel Zirconium Alloy Under Different Hydrogen-Charging Current Densities.
Materials (Basel)
January 2025
State Key Laboratory of Explosion Science and Protection Technology, Beijing Institute of Technology, Beijing 100081, China.
Hydrogen embrittlement is a critical issue for zirconium alloys, which receives long-term attention in their applications. The formation of brittle hydrides facilitates crack initiation and propagation, thereby significantly reducing the material's ductility. This study investigates the tensile properties and hydride morphology of a novel zirconium alloy under different hydrogen-charging current densities ranging from 0 to 300 mA/cm, aiming to clarify the influence of hydrides on the fracture behavior of the alloy.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!