Download full-text PDF

Source
http://dx.doi.org/10.1007/BF00198898DOI Listing

Publication Analysis

Top Keywords

metal leaching
4
leaching experimental
4
experimental coal
4
coal fly-ash
4
fly-ash oyster
4
oyster cultch
4
metal
1
experimental
1
coal
1
fly-ash
1

Similar Publications

Municipal solid waste incineration fly ash (MSWIFA) is considered a hazardous solid waste, traditionally disposed by solidified landfill methods. However, solidified landfills present challenges with leaching heavy metals, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). To address this issue, this study examined two pretreatment methods for MSWIFA: sintering at 850℃ for 30 min and washing with three water baths (20 min each) at a 3:1 liquid-solid ratio.

View Article and Find Full Text PDF

In this study, in order to solve the problems of resource utilization of electrolytic manganese residue and the destruction of natural resources by the over-exploitation of raw materials of traditional ceramics, electrolytic manganese residue (EMR), red mud (RM), and waste soil (WS) were used to prepare self-foaming expanded ceramsite (SEC), and different firing temperatures and four groups with different mixing ratios of these three raw materials were considered. Water absorption, porosity, heavy metal ion leaching, and compressive strength in the cylinder of SEC were evaluated. The chemical composition and microscopic morphology of SEC were investigated by XRD and SEM.

View Article and Find Full Text PDF

Mine tailings are a byproduct of mineral extraction and often pose an environmental challenge due to the contamination of soil and water bodies with dissolved metals. However, this type of waste offers the opportunity for the recovery of valuable metals such as silver (Ag). In the present investigation, an integral analysis of a sample of tailings was carried out, addressing granulometry, elemental composition, neutralization potential (NP), and acid potential (AP), as well as mineralogy, for the dissolution of silver from this type of waste.

View Article and Find Full Text PDF

The use of reduction leaching in the production of alumina from bauxite by the Bayer process in order to decrease the amount of waste (bauxite residue) by adding elemental iron or aluminum, as well as Fe salts and organic compounds in the stage of high-pressure leaching, requires the purchase of relatively expensive reagents in large quantities. The aim of this study was to investigate the possibility of the use of electrolytically reduced bauxite residue (BR) as a substitute for these reagents. Reduced BR was obtained from Al-goethite containing BR using a bulk cathode in alkaline suspension.

View Article and Find Full Text PDF

Supplying critical metals such as cobalt, lithium, and nickel, to achieve sustainable development goals will be one of the most important concerns in the coming decades. A significant challenge in this area is the separation of some similar elements, such as nickel and cobalt. This study proposes a novel and eco-friendly process to selectively recover cobalt from nickel and manganese.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!