A completely automated pilot plant used for fermentation has been employed with direct digital control (DDC) technology for monitoring and regulating growth of human cells. A human hybridoma cell line (3D6) producing anti-human immunodeficiency virus (HIV)-1 antibodies was used as a model for large-scale production (300-liter airlift fermentor) in continuous culture. Parameters controlled were pH, dissolved oxygen, temperature and the flow rate of four gases used in the process. A control strategy was implemented to achieve constant fluid velocity and mixing by maintaining the rate of gas flow at a constant level. Another advantage of this approach was that the total gas flow required for optimal fluid circulation was reduced from 1 volume gas/volume fermenter/hour (vvh) to 0.3 vvh. Use of a low flow rate eliminated the serious problems of foaming, which contributed significantly to cell destruction, shorter filter-life and other considerations. Dilution rate was optimized at laboratory scale for maximum productivity, which results in relatively low viability. At a dilution rate of 0.0076 h-1, a total cell density of 6-7 x 10(5) cells/ml with a viability of approximately 75% was maintained during long-term continuous cultivation. These growth conditions resulted in a product titer stabilized in the range of 35 micrograms IgG/ml. Batchwise purification was achieved with a recovery of more than 50% and a final purification of active monoclonal antibody representing about 99% product. Results from isoelectric focusing and Western blotting demonstrated batch-to-batch consistency of the purified human monoclonal antibody to HIV-1 during the continuous growth process.(ABSTRACT TRUNCATED AT 250 WORDS)

Download full-text PDF

Source

Publication Analysis

Top Keywords

large-scale production
8
human monoclonal
8
pilot plant
8
flow rate
8
gas flow
8
dilution rate
8
monoclonal antibody
8
rate
5
stable continuous
4
continuous large-scale
4

Similar Publications

Global climate change has become one of the most large-scale, widespread, and far-reaching challenges facing mankind. Against this background, China has proposed a "dual-carbon" target in 2020, which greatly demonstrates China's determination and commitment to carbon emission reduction, and the burden of realizing the "dual-carbon" target is mainly borne by heavy polluters. The burden of achieving the "dual-carbon" goal is mainly borne by the heavily polluting firms.

View Article and Find Full Text PDF

Ethyl cellulose (EC) is a biocompatible, renewable, and recyclable material with diverse sources, making it an attractive candidate for industrial applications. Electrospinning has gained significant attention for the production of EC fibers. However, conventional electrospinning methods face challenges such as bead formation, low yield, and the absence of porous internal structures, limiting both the functional performance and scalability.

View Article and Find Full Text PDF

In various applications, the pore structure of a porous medium must be controlled to facilitate heat and mass transfer, which considerably influence the system performance. Freeze-casting is a versatile technique for creating aligned pores; However, because of the complexity of the associated equipment and the energy inefficiency of liquid-nitrogen-based cooling in a room-temperature environment, limits scalability for industrial applications. This study is aimed at establishing a novel freeze-casting strategy with a simple mold design combining heat-conductive and insulating materials for long-range pore alignment via directional ice growth under deep-freezing conditions, rendering it feasible for large-scale production.

View Article and Find Full Text PDF

Factor XIa (FXIa) is a plasma protease that plays a crucial role in the intrinsic pathway of blood coagulation, making it a promising target for antithrombotic therapy. Circular DNA aptamers, with their dramatically enhanced biological and structural stability, hold great potential as new-generation DNA-based anticoagulants. However, the functional selection and large-scale synthesis of them remains a substantial challenge.

View Article and Find Full Text PDF

Large-scale and long-term wildlife research and monitoring using camera traps: a continental synthesis.

Biol Rev Camb Philos Soc

January 2025

Wildlife Observatory of Australia (WildObs), Queensland Cyber Infrastructure Foundation (QCIF), Brisbane, Queensland, 4072, Australia.

Camera traps are widely used in wildlife research and monitoring, so it is imperative to understand their strengths, limitations, and potential for increasing impact. We investigated a decade of use of wildlife cameras (2012-2022) with a case study on Australian terrestrial vertebrates using a multifaceted approach. We (i) synthesised information from a literature review; (ii) conducted an online questionnaire of 132 professionals; (iii) hosted an in-person workshop of 28 leading experts representing academia, non-governmental organisations (NGOs), and government; and (iv) mapped camera trap usage based on all sources.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!