Purpose: Microwave antennas of various designs were inserted into arrays of nylon catheters implanted in brain tumors with the goal of raising temperatures throughout the target volume to 43.0 degrees C.
Methods And Materials: All antennas were flexible, and included dipole, choke dipole, modified dipole, and helical designs driven at 915 or 2450 MHz. Antennas were tested in brain-equivalent phantom in arrays. Phase shifting and phase rotation techniques were incorporated into the treatment system to steer power in the tumor, assisted by a treatment planning computer that predicted power deposition patterns and temperature distributions. Choke antennas were designed and tested to reduce a dependence of the central power location on depth of insertion into tissue. Temperature data analysis used only central and orthogonal axes mapping data measured at 2.0 mm intervals.
Results: A total of 23 patients were treated, using from one to six microwave antennas. Minimum tumor temperatures, averaged over the 60 min treatment, ranged from 37.2-44.3 degrees C (mean 40.0 degrees C) and maximum average tumor temperatures ranged from 46.5-60.1 degrees C (mean 49.1 degrees C). The percentage of all measured temperatures reaching therapeutic levels (> or = 43.0 degrees C) was 70.9. T90, the temperature at which 90% of all measured temperatures equaled or exceeded, was 40.8 degrees C, and T50 was 44.2 degrees C.
Conclusion: Patient data analysis showed that the array of four dipole antennas spaced 2.0 cm apart were capable of heating a volume of 5.9 cm (along the central array axis) x 2.8 cm x 2.8 cm.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/0360-3016(94)90402-2 | DOI Listing |
Sci Rep
January 2025
Department of Microwave and Antenna Engineering, Faculty of Electronics, Telecommunications, and Informatics, Gdańsk University of Technology, Gdańsk, 80-233, Poland.
An ultrawideband slant-polarized monopulse feed is designed and fabricated for microwave applications. The proposed configuration features four end-launched diagonal horns allowing for the production of sum and difference channels in two principal planes. The key advantage of this proposed monopulse antenna over traditional monopulse feeds is its ability to combine the benefits of ultrawideband performance with slant polarization while maintaining acceptable side lobe level.
View Article and Find Full Text PDFNat Commun
January 2025
State Key Laboratory for Extreme Photonics and Instrumentation, International Research Center for Advanced Photonics, Ningbo Innovation Center, College of Optical Science and Engineering, Zhejiang University, Hangzhou, 310058, China.
The frequency-modulated continuous-wave (FMCW) technology combined with optical phased array (OPA) is promising for the all-solid-state light detection and ranging (LiDAR). We propose and experimentally demonstrate a silicon integrated OPA combined with an optical frequency microcomb for parallel LiDAR system. For realizing the parallel wavelengths emission consistent with Rayleigh criterion, the wide waveguide beyond single mode region combined with the bound state in the continuum (BIC) effect is harnessed to obtain an ultra-long optical grating antenna array.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Department of Civil Environmental and Mechanical Engineering, University of Trento, 38123 Trento, Italy.
The present study proposes an L-shaped coplanar strip dipole antenna for sensing the presence of adulterants in liquid food samples. The proposed antenna dimensions are optimized using ANSYS HFSS, and a prototype is fabricated and validated. The sensing region is optimized based on the current distribution and measured reflection coefficients.
View Article and Find Full Text PDFNat Commun
January 2025
Institute of Electromagnetic Space, Southeast University, Nanjing, China.
Holographic multiple-input multiple-output (MIMO) method leverages spatial diversity to enhance the performance of wireless communications and is expected to be a key technology enabling for high-speed data services in the forthcoming sixth generation (6G) networks. However, the antenna array commonly used in the traditional massive MIMO cannot meet the requirements of low cost, low complexity and high spatial resolution simultaneously, especially in higher frequency bands. Hence it is important to achieve a feasible hardware platform to support theoretical study of the holographic MIMO communications.
View Article and Find Full Text PDFMicrosyst Nanoeng
January 2025
School of Instrument Science and Opto-Electronics Engineering, Beijing Information Science and Technology University, 100192, Beijing, China.
Flexible electromagnetic metamaterials are a potential candidate for the ideal material for electromagnetic control due to their unique physical properties and structure. Flexible electromagnetic metamaterials can be designed to exhibit specific responses to electromagnetic waves within a particular frequency range. Research shows that flexible electromagnetic metamaterials exhibit significant electromagnetic control characteristics in microwave, terahertz, infrared and other frequency bands.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!