Purpose: The assessment of the effects of nasal absorption enhancers on the rat nasal epithelium and membrane permeability in vivo after a single nasal dose of the enhancers.
Methods: The release of marker compounds (protein, cholesterol and acid phosphatase) from the nasal epithelium was measured using a lavage technique. The nasal membrane permeability was determined after intravenous administration of a systemic tracer (FITC-albumin).
Results: The effects of the absorption enhancers could be classified into four categories. The first consisted of HP beta CD (5%), DM beta CD (2%) and RAMEB (2%) and was not different from the control (physiological saline). For the second category, DM beta CD (5%), effects were significantly higher than for the control. The third category, SGC (1%), was more active than DM beta CD (5%) but less active than the last group. The fourth, most membrane damaging, category consisted of STDHF (1%), laureth-9 (1%) and LPC (1%). Administration of these three enhancers also resulted in release of acid phosphatase, indicating that severe membrane damage occurred. The release of cholesterol from nasal epithelium was largely dependent on the cholesterol solubilisation of the absorption enhancers. The amount of cholesterol released by laureth-9 and LPC was the largest.
Conclusions: The results of this in vivo study are in agreement (i.e. similarity in rank order) with morphological and ciliotoxicity studies of nasal absorption enhancers, demonstrating that this in vivo model is a valuable tool to classify nasal absorption enhancers according to their effects on the rat nasal epithelium.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1023/a:1016207809199 | DOI Listing |
Sci Rep
January 2025
Department of Mechanical and Industrial Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, 576104, India.
Fiber-reinforced polymer composites are subjected to harsh environmental conditions over the course of their designed lifespan. Studying the aging process of fiber-reinforced polymer composites exposed to boiling water is critical for improving their durability. This study uses a hand lay-up technique to fabricate composites from glass fiber, bamboo fiber, nanoclay, and epoxy.
View Article and Find Full Text PDFSci Rep
January 2025
Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran.
This study investigates the mechanical and microstructural properties of loose sandy soil stabilized with alkali-activated Ground Granulated Blast Furnace Slag (GGBFS). To examine the effects of varying GGBFS contents, curing times, and confining pressures on mechanical behavior, undrained triaxial and unconfined compressive strength (UCS) tests were conducted. Microstructural analyses using FE-SEM, EDX, and FTIR were performed to elucidate the nature and development of cementation.
View Article and Find Full Text PDFSci Rep
January 2025
Laboratory of Materials, Nanotechnologies and Environment, Center of Sciences of Materials, Faculty of Sciences, Mohammed V University in Rabat, Avenue Ibn Battouta, BP:1014, 10000, Rabat, Morocco.
In this study, novel polyaniline-coated perovskite nanocomposites (PANI@CoTiO and PANI@NiTiO) were synthesized using an in situ oxidative polymerization method and evaluated for the photocatalytic degradation of Rhodamine B (RhB) a persistent organic pollutant. The nanocomposites displayed significantly enhanced photocatalytic efficiency compared to pure perovskites. The 1%wt PANI@NiTiO achieved an impressive 94% degradation of RhB under visible light after 180 min, while 1wt.
View Article and Find Full Text PDFJ Phys Chem A
January 2025
Laboratory of Physical Chemistry, Department of Chemistry, National and Kapodistrian University of Athens, Zografou GR-15784, Greece.
The photophysical properties of five dyes, i.e., perylene, anthracene, aminoanthracene, 1,6-diphenylhexatriene, and 7-diethylamino-4-methylcoumarin, in solvent and attached to the poly(methyl methacrylate) (PMMA) polymer, were studied via DFT and TD-DFT calculations.
View Article and Find Full Text PDFAdv Colloid Interface Sci
January 2025
State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310058, China; Zhejiang-Russia Joint Laboratory of Photo-Electro-Magnetic Functional Materials, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310058, China.
Microwave absorption materials (MAMs) gradually exhibit crucial applications in reducing electromagnetic wave (EMW) pollution, avoiding EMW information leakage, and solving radar stealth. Metal-organic frameworks (MOFs)-derived materials are flourishing in the domain of EMW absorption attributed to their especial structures, heteroatom doping and controllable components. Herein, various strategies to enhance the EMW absorption ability of MOFs-derived materials are outlined, covering structural design and compositional regulation.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!