Well-drilling fluid and a number of the known components (barite, clay, Aldacide, Surflo, and Dowicide, were tested for effects on the biomass and community structure of the microbiota that colonize marine sands exposed for eight weeks to running ambient seawater. Shading the microbiota from light depressed the microflora without a significant effect on the biomass, while well-drilling fluids layered on the surface or mixed with the sand significantly increased a component of the bacteria and the microfauna as reflected in changes in the fatty acid composition. There were some shading effects from the surface layering of well-drilling fluids as reflected in the fatty acids from the microflora when compared to the sands mixed with well-drilling fluids. Barite had essentially no effect on the biomass or community structure while clays increased nearly all of the biomass indicators for the bacteria as well as the microfauna; the clay overlay mirrors the effect of the drilling fluids. Aldacide shifted the bacterial composition, depressing the proportions of microbes containing the cyclopropane fatty acids and the anaerobic pathways of desaturation. Concentrations of 1 and 15 microgram/L increased the bacterial biomass as reflected in the total lipid (16:0) and extractable lipid phosphate coupled with a decrease in the total microeukaryotes. Surflo increased the biomass and shifted the bacterial community structure at concentrations between 4 and 800 microgram/L. The lowest level also stimulated the microfauna. Dowicide at 100 microgram/L increased the bacteria forming cis-vaccenic acid and the microfauna similar to low concentrations of Surflo.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/BF01055181 | DOI Listing |
Int J Biol Macromol
January 2025
Department of Petroleum and Gas Engineering Technology, Federal Polytechnic of Oil and Gas, Bonny-island, PMB 5027, Rivers State, Nigeria.
Chromium-based lignosulfonate (CrLS) deflocculants that are commonly used in water-based drilling muds (WBDMs) to deflocculate bentonites under high temperature (HT), high-pressure (HP), and high-salinity (HS) oil well drilling conditions have been found to contain heavy metals such as chromium, which is toxic and degrades rapidly. However, different ways of addressing this issue have been proffered, including the use of natural polymers such as starch, cellulose, or anionic inorganic agents such as sodium polyphosphates with little or no impact. Other lignosulfonate (LS)-based deflocculants, like sodium-based LS and bio-based LS, have shown a number of benefits, such as being better for the environment, more soluble and evenly distributed in WBDMs, more resistant to salt contamination, easily biodegradable, safe, and able to go through different chemical changes.
View Article and Find Full Text PDFJ Mol Model
November 2024
Instituto de Química, Universidade Federal Do Rio de Janeiro, Centro de Tecnologia, Bloco A, Rio de Janeiro, RJ, 21941-909, Brazil.
Context: Drilling fluids must reduce the coefficient of friction between the drilling equipment and the drilled rock or well casing. Friction forces become particularly relevant in drilling with a high angle gain, in which cases oil-based fluids are generally used. The latter are highly lubricating, but harmful to the environment.
View Article and Find Full Text PDFCarbohydr Polym
January 2025
Hubei Engineering Research Centers for Clean Production and Pollution Control of Oil and Gas Fields, Jingzhou, Hubei 434023, China.
As the concept of green and sustainable development gains widespread acceptance, the demand for non-toxic, biodegradable, renewable, and widely sourced natural materials (NMs) is increasing across various fields. In oil and gas well drilling operations, water-based drilling fluids (WBDFs) are at the forefront of eco-friendly practices. Their rheological modification and fluid loss control properties are two fundamental and crucial aspects ensuring safe drilling.
View Article and Find Full Text PDFACS Appl Mater Interfaces
August 2024
School of Materials Sciences and Chemistry, and School of Earth Resources, China University of Geosciences, Wuhan 430074, China.
Traditional granular hydrogels showed excellent injectivity, thermal integrity, and efficient remediation of heterogeneous reservoirs. However, granular hydrogels have demonstrated their inability to adapt to fractures due to the lack of sufficient interactions. Herein, we present new nanocomposite hydrogels consisting of cationic nanogelators and anionic granular hydrogels that can chemically in situ reform bulk hydrogels in the fractures.
View Article and Find Full Text PDFACS Omega
May 2024
Key Laboratory of Ministry of Education of China on Enhanced Oil and Gas Recovery, Northeast Petroleum University, Daqing, Heilongjiang 163318, China.
In view of the problems in which the solid content of drilling fluid increases in the middle and late stages of horizontal well drilling, the lubricity of mud cakes on the borehole wall decreases, and the friction of pipe string increases due to the gradual thickening of mud cakes, which leads to the sticking and the obvious decrease of cementing strength at the second interface, a mud cake improver Mul-GX with lubrication and interface enhancement effect was studied in this paper. Based on the hydration and filling mechanism, the lubricity of the mud cake was improved, its thickness was reduced, and its strength was improved through synergistic effects of solvated water film lubrication and buffering, hardening and crystallization of gelled substances, and filling and dispersion of elastic particles. The mud cake improver Mul-GX is composed of the metasilicate GX-ZQ, polymer copolymer GX-JB, and polymer GX-TX, and the mass ratio of each component was GX-ZQ: GX-JB: GX-TX = 15:1:0.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!