Age-hardening was produced by the additions of minor amounts of indium to a Au-Pd-base alloy for metal-ceramics, as in the Au-Pt-based ternary alloys. (1) The age-hardening, detected from the electrical resistance measurement and hardness test, increased with increasing indium contents in the Au-Pd-In ternary alloys, but was not responsible in a Au-Pd-base alloy. (2) Photomicrographs of the ternary alloys demonstrated the characteristic microstructures in the age-hardened state, but did not appear the intragranular precipitations in the as-casted and the solution-annealed state. A nodular reaction at the grain boundary was shown in the initial aging stage, subsequently the precipitations in the matrix resulted with increasing in hardness. The typical Widmannstätten's structure was developed with the over-aged stage. (3) The matrix phase in the Au-Pd-base ternary alloys containing indium was indexed by X-ray diffraction to a face-centered cubic structure. The lattice parameters were found within a=4.05 A to a=4.06 A, and then increased with indium contents. (4) The cause of the age-hardening has been implied during to the formation of intermetallic compounds, i.e. Pd-In system, but the structures can not been identified in the age-hardening state.
Download full-text PDF |
Source |
---|
Adv Sci (Weinh)
January 2025
Department of Physics, University of Ulsan, Ulsan, 44610, Republic of Korea.
The anisotropic properties of materials profoundly influence their electronic, magnetic, optical, and mechanical behaviors and are critical for a wide range of applications. In this study, the anisotropic characteristics of Ni-based van der Waals materials, specifically NiTe and its alloy NiTeSe, utilizing a combination of comprehensive scanning tunneling microscopy (STM), angle-resolved photoemission spectroscopy (ARPES), and density functional theory (DFT) calculations, are explored. Unlike 1T-NiTe, which exhibits trigonal in-plane symmetry, the substitution of Te with Se in NiTe (resulting in the NiTeSe alloy) induces a pronounced in-plane anisotropy.
View Article and Find Full Text PDFACS Catal
January 2025
Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University, V Holešovičkách 2, 180 00 Prague 8, Czech Republic.
Achieving the optimal balance between cost-efficiency and stability of oxygen reduction reaction (ORR) catalysts is currently among the key research focuses aiming at reaching a broader implementation of proton-exchange membrane fuel cells (PEMFCs). To address this challenge, we combine two well-established strategies to enhance both activity and stability of platinum-based ORR catalysts. Specifically, we prepare ternary PtNi-Au alloys, where each alloying element plays a distinct role: Ni reduces costs and boosts ORR activity, while Au enhances stability.
View Article and Find Full Text PDFInt J Mol Sci
December 2024
Clinic of Preventive, Community Dentistry and Oral Health, Victor Babes University of Medicine and Pharmacy, Eftimie Murgu Sq. no 2, 300041 Timisoara, Romania.
Good oral hygiene is crucial during treatment with fixed appliances, emphasising the need for additional or alternative oral health methods during orthodontic treatment. This study investigates the effect of essential oil (EO)-based preparations on biofilm adhesion to orthodontic archwires. Five identical-sized orthodontic archwires of different materials were tested using therapeutic and preventive applications of essential oils.
View Article and Find Full Text PDFACS Nano
January 2025
Key Laboratory of Hydraulic Machinery Transients, Ministry of Education, School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China.
Metal nanocatalysts supported on oxide scaffolds have been widely used in energy storage and conversion reactions. So far, the main research is still focused on the growth, density, size, and activity enhancement of exsolved nanoparticles (NPs). However, the lack of precise regulation of the type and composition of NPs elements under reduction conditions has restricted the architectural development of in situ exsolution systems.
View Article and Find Full Text PDFSci Rep
December 2024
Department of Physics, Laghman University, Mehtarlam City, Laghman, 2701, Afghanistan.
Aluminum alloys have promising characteristics which make them more useful in industrial applications for thermal management and entropy of the fluidic system. Hence, the current research deals with the analysis of entropy and thermal performance of (CHO-HO)/50:50% saturated by (AA7072/AA7076/TiAIV) alloys. Traditional problem modified using enhanced characteristics of ternary alloys and hydrocarbon 50:50% base fluid.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!