The evaluation of the efficiency of polymer additives with special emphasis on uv absorbers and antioxidants in polyurethane elastomers has been completed. Aliphatic polyurethanes were chosen for this study because their properties closely relate to the requirements of maxillofacial prosthesis. The polyurethane elastomers were either synthesized by ourselves or formulated according to the manufacturer's recommendation. Eleven different types of uv absorbes, coupled with one antioxidant, were incorporated into the polyurethane systems. The Atlas twin-lamp carbon arc Weatherometer was used as the source of uv. The samples were periodically withdrawn for examination of yellowing and tackiness. It was found that, although the incorporation of uv stabilizers enhanced the uv resistance of polyurethanes, the problem of tackiness resulting from uv aging was not solved satisfactorily. The phenomenon of yellowing, however, was significantly improved, mainly due to the aliphatic structure of polyurethanes. The most promising uv absorbers are Tinuvin 770 and the combination of Tinuvin 328, ZnO, and an antioxidant. Their effectiveness in other polyurethane systems is not known and further research is underway to explore this field. Hopefully, these findings will greatly assist the successful application polyurethane elastomers in maxillofacial prosthesis.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/jbm.820120308 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Dynamic characteristics of a compliant seat coupled with the human body and a manikin during the exposure to the whole-body vibration: effect of the polyurethane foam, the track position and the measurement location.
Acta Bioeng Biomech
June 2024
2Institute of Sound and Vibration Research, University of Southampton, United Kingdom.
Transmissibility is used to assess dynamic responses of the occupant-seat system, and most studies have exclusively assessed the transmissibility from the floor to the cushion or the backrest surface with the human body. In this investigation, the vertical vibration transmitted from the floor to six specific locations both on the seat surface and the frame when the seat was fixed on three positions on the track was examined utilizing an SAE J826 manikin and 12 male adults (0.25 to 20 Hz) for a duration of 120 seconds at three vibration amplitudes.
View Article and Find Full Text PDFComparative Evaluation of Surface Roughness and Color Stability of Polyetheretherketone with Conventional Interim Prosthetic Materials: An Study.
J Contemp Dent Pract
October 2024
Department of Prosthodontics, Government Dental College, Kozhikode, Kerala, India, Orcid: https://orcid.org/0000-0003-1456-3851.
Aim: The aim of this study was to compare the surface roughness and color stability of polyetheretherketone (PEEK) with those of conventional interim prosthetic materials like polymethylmethacrylate, bis-acrylic composite, and rubberized diurethane dimethacrylate, following immersion in solutions of varying pH value.
Materials And Methods: A total of 320 circular discs with 10 mm diameter and 2 mm height were divided based on the fabrication ( = 80)-group A: polymethylmethacrylate; group B: bis-acrylic composite; group R: rubberized diurethane; and group P: hot-pressed PEEK-and were subjected to baseline measurement of roughness ( = 40) and color ( = 40) using 3D profilometer and UV-Vis spectrophotometer, respectively. Later, 10 samples from each group were immersed in distilled water, black coffee, green tea, and Pepsi, respectively, for 120 days, and measurements of roughness and color were repeated.
Synthesis, characterization and molecular docking of chitin-curcumin based thermoset polyurethane elastomers for angiogenic potential.
Int J Biol Macromol
January 2025
Department of Chemistry, The University of Lahore, Lahore, Pakistan.
This current study has been carried out to investigate the angiogenic potential and in silico studies of designed thermoplastic polyurethanes (PU) for biomedical potential. For this purpose, curcumin based thermoplastic polyurethanes has been synthesized by two step methodology. Different characterization techniques such as FTIR, solid state HNMR, CNMR and XRD were used to confirm the synthesis of designed thermoplastic polyurethanes.
View Article and Find Full Text PDFDetachable Top Electrode-Organic Photodetector for Repeated Nondestructive Evaluation of Device Performance and Surface Analysis of the Active Layer.
ACS Appl Mater Interfaces
January 2025
Department of Electrical Engineering and Information Systems, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan.
Organic photodetectors (OPDs) are key devices for monitoring vital signs, such as heart rate and blood oxygen level. For realizing the long-term measurement of biosignals, stable operation is essential. To improve the stability of OPDs, it is important to analyze each layer to understand the degradation mechanism.
View Article and Find Full Text PDFFrom biofilms to biocatalysts: Innovations in plastic biodegradation for environmental sustainability.
J Environ Manage
February 2025
National Institute for Materials Advancement, Pittsburg State University, Pittsburg, KS, 66762, USA; Department of Chemistry, Pittsburg State University, Pittsburg, KS, 66762, USA. Electronic address:
The increase in plastic waste has evolved into a severe environmental crisis, which requires innovative recycling technologies to repurpose used plastic with adequate environmental protection. This review highlights the urgent need for innovative approaches to the treatment and degradation of post-use plastics. It investigates the promising role of biofilms in the biodegradation of polymers, especially for polymers such as polyethylene terephthalate (PET), polyurethane (PU), and polyethylene (PE).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!