Some polynuclear aromatics (PNA) have been found to be potent carcinogens for all tissues and organs of experimental animals that have been exposed to them, but different dose levels are needed for these effects. They have been known for decades to cause cancer at the site of application but also at certain sites distant from the area of contact. Although some hydrocarbons are potent and complete carcinogens, the majority of related hydrocarbons was originally found to be inactive. Since they generally appear together, it was important to know more about their interaction, particularly whether they would synergize, or antagonize. The polycyclic hydrocarbons have been studied by subcutaneous injection, where they prove very potent carcinogens. They are also very active on the skin of mice where they produce cancer on prolonged application. Inhalation studies, require larger doses yielded negative results until particulate matter was introduced which facilitated the development of lung tumors. Although iron oxide dust was used initially, other dusts were also capable of enhancing the response of the tissue to benzo(a)pyrene carcinogenesis. This point is of importance, particularly since the inhalation of PNA in situations of air pollution or coal mining involves particulates, although of a different type. Soot is not a homogenous substance and several factors determine its properties. Soots will lose some of the absorbed chemicals during their residence in air, but they retain their PNAs for long periods of time when they reach the soil. The carcinogenicity of PNAs in the adsorbed state may be completely absent, depending on particle size of the soot and availability of eluting capability of the tissues or cells in contact with the soot. Whenever the carcinogenic polynuclear aromatics can be eluted they will be active in producing cancer if their residence is adequate. There seems to be no reason to assume that a large increase in coal combustion in the future will by necessity lead to greater risks of cancer to the coal miners or the general urban dweller, because activities to be started now can take into consideration the requirements necessary for control of air pollution in mines as well as in cities. If new uses of coal will be developed, it will be a completely different situation, and statements about the carcinogenic risk from coal utilization do not apply there. Although some of the same carcinogenic PNAs are involved in the health hazards from those processes, other carcinogens and also cocarcinogens will be present, and the exposed workers will not have the apparent benefits of adsorption of PNAs on soot.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC1638110 | PMC |
http://dx.doi.org/10.1289/ehp.7933203 | DOI Listing |
ACS Omega
January 2025
College of Safety Science & Engineering, Liaoning Technical University, Huludao, Liaoning 125105, China.
The objective of this study was to evaluate the effect of injecting flue gas (CO, N, and O) originating from coal-fired power plants into a coal seam on CH extraction and CO geological storage. To this end, a multifield thermal-fluid-solid-coupled mathematical model of flue gas injection extraction was established. The results showed that with the increase in time increase, the volume concentration of CH decreased, but the CO, N, and O increased.
View Article and Find Full Text PDFCoal mining industry is one of the main source for economy of every nations, whereas safety in the underground coal mining area is still doubtful. According to some reports, there is heavy loss of life and money due to the occasional accidents in the coal mining area. Some existing researchers has been addressed this issue and approached their method.
View Article and Find Full Text PDFMethodsX
June 2025
CUMT-UCASAL Joint Research Center for Biomining and Soil Ecological Restoration, State Key Laboratory for Fine Exploration and Intelligent Development of Coal Resources, China University of Mining and Technology, Xuzhou, Jiangsu province, 221116, PR China.
A critical challenge in ecological restoration of open-pit mine dumps in cold regions with limited topsoil resources is how to rapidly mitigate the plant growth-inhibitory effects of mineral black clay, thereby converting it into arable soil. Leveraging the high degradation capacity of coal seam-associated microorganisms on fossil carbon materials, combined with soil conditioning techniques, this study developed a microbial-based approach for modifying black clay. Seed germination experiments informed both laboratory and field trial designs.
View Article and Find Full Text PDFSci Rep
January 2025
Guizhou Mining Safety Science Research Institute Co., Ltd, Guiyang, 550025, China.
To enhance the safety of coal mining operations and improve the efficiency of gas extraction, hydraulic flushing technology has been widely used in low permeability coal seams. This study aims to investigate the mechanism of hydraulic flushing by conducting experiments focusing on four aspects: sample strength, punching pressure, punching position and vibration direction. The results show that an increase in hydraulic flushing pressure leads to a deeper impact groove, whereas higher sample strength results in a shallower groove.
View Article and Find Full Text PDFEnviron Res
January 2025
School of Creative Science and Engineering, Faculty of Science and Engineering, Waseda University, Tokyo 169-8050, Japan; Department of Earth Resources Engineering, Faculty of Engineering, Kyushu University, Fukuoka 819-0395, Japan. Electronic address:
Layered double hydroxides (LDHs) can effectively stabilize Se oxyanions, yet the thermal stability of Se oxyanions incorporated into LDHs remains unclear. In this study, calcination products of three types of LDHs loaded with SeO2- 3 or SeO2-4 were analyzed using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray absorption fine structure spectroscopy (XAFS) and leaching tests. It has been found that SeO2-4 can be reduced to SeO2- 3 in the Fe-containing LDHs after calcination at temperatures above 450 °C.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!