Fluorescence Quenching of Graphene Quantum Dots from Orange Peel for Methyl Orange Detection.

Nanomaterials (Basel)

Institute of Nanochemistry and Nanobiology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China.

Published: February 2025

Methyl orange (MO) is an organic synthetic dye widely used in laboratory and industrial applications. In laboratory settings, it serves as an acid-base indicator due to its distinct color change in both acidic and alkaline environments. Industrially, it is primarily utilized in the textile industry for its ultraviolet (UV) absorption properties. However, the discharge and leakage of methyl orange into the environment can cause severe ecological damage and pose potential carcinogenic and teratogenic risks to human health. Therefore, detecting and quantifying the concentration of methyl orange in various matrices is crucial. This study reports the synthesis of graphene quantum dots (GQDs) from orange peel as a precursor, using ethanol and dimethylformamide (DMF) as solvents. Cyan (c-GQDs) and yellow (y-GQDs) graphene quantum dots were synthesized through a bottom-up hydrothermal method. The difference in color is attributed to the redshift caused by the varying ratio of pyridine nitrogen to pyrrole nitrogen. These GQDs exhibited notable optical properties, with c-GQDs emitting cyan fluorescence and y-GQDs emitting yellow fluorescence under UV light. To investigate fluorescence quenching effects, nine commonly used dyes were tested, and all were found to quench the fluorescence of y-GQDs, with methyl orange having the most significant effect. The fluorescence quenching of orange peel-derived GQDs in the presence of methyl orange is attributed to poor dispersion in DMF solution. Additionally, the GQDs possess high specific surface area, abundant surface functional groups, and excellent electronic conductivity, which contribute to their effective fluorescence quenching performance. The average thickness of y-GQDs (the vertical dimension from the substrate upwards) was 3.51 nm, confirming their graphene-like structure. They emitted yellow fluorescence within the wavelength range of 450-530 nm. Notably, a significant linear correlation was found between the concentration of methyl orange and the fluorescence intensity of y-GQDs (regression coefficient = 0.9954), indicating the potential of GQDs as effective sensing materials for organic pollutant detection.

Download full-text PDF

Source
http://dx.doi.org/10.3390/nano15050376DOI Listing

Publication Analysis

Top Keywords

methyl orange
28
fluorescence quenching
16
graphene quantum
12
quantum dots
12
orange
10
fluorescence
9
orange peel
8
concentration methyl
8
fluorescence y-gqds
8
yellow fluorescence
8

Similar Publications

Fluorescence Quenching of Graphene Quantum Dots from Orange Peel for Methyl Orange Detection.

Nanomaterials (Basel)

February 2025

Institute of Nanochemistry and Nanobiology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China.

Methyl orange (MO) is an organic synthetic dye widely used in laboratory and industrial applications. In laboratory settings, it serves as an acid-base indicator due to its distinct color change in both acidic and alkaline environments. Industrially, it is primarily utilized in the textile industry for its ultraviolet (UV) absorption properties.

View Article and Find Full Text PDF

One-Step Solvothermal Synthesis of FeO Acicular Aggregates Induced by Reaction Medium and Urea for Photocatalytic Degradation of Azo Dyes.

Nanomaterials (Basel)

February 2025

College of Materials Science and Engineering, National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044, China.

Based on the magnetic sensitivity of FeO in various fields, we aimed to propose a one-step solvothermal process for the synthesis of single-phase FeO induced by the reaction medium and urea, avoiding high-temperature reduction in H or N atmospheres. Feasibility was tested with purified water (HO), methyl alcohol (MA), ethyl alcohol (EA), and ethylene glycol (EG) as reaction media. The findings indicated that the solvothermal reaction system utilizing EA was more effective for the synthesis of cubic magnetic FeO.

View Article and Find Full Text PDF

Pickering self-floating adsorbents: Natural tea polyphenol nanoparticle-based beads for efficient separation of cationic dyes with simple recovery.

Int J Biol Macromol

March 2025

National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, PR China; College of Biomedical Engineering, Sichuan University, Chengdu 610064, PR China. Electronic address:

Energy-efficient separation and recovery of adsorbents, particularly nano/micro-adsorbent materials, and effective adsorption of water-soluble ionic dyes continue to be crucial challenges in wastewater treatment. In this study, a novel water-suspended Pickering adsorbent with adsorption selectivity was developed using natural polyphenol nanomaterials. The preparation procedure is simple and cost-effective, involving ultrasonic emulsification and calcium alginate crosslinking without the use of complex equipment or expensive chemicals.

View Article and Find Full Text PDF

Membrane fouling is the major technology issue facing the wide application of electrodialysis (ED) for water purification in real world cases. The fouling of membrane in ED leads to reduce the removal rate, increase in membrane damage, and it requires continuous costly maintenance. Herein, a successful dual process combining ED and electrocoagulation (EC) was designed to combat anionic membrane (AMX) fouling and to boost organic dye pollutant (methyl orange, (MO)) removal efficiency.

View Article and Find Full Text PDF

Growing environmental concerns have driven the search for sustainable wastewater treatment solutions, particularly for the removal of persistent synthetic dyes. This study explores hydrogels made from squid pen protein (SPP) and chitosan, biodegradable polymers, for anionic dye adsorption-reactive blue 4 (RB4) and methyl orange (MO). A 50%/50% SPP/chitosan hydrogel was optimal for RB4 adsorption while minimizing chitosan use.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!