Broadband and omnidirectional absorption is the first requirement for any solar energy harvesting technology. For example, the realization of silicon thin-film photovoltaics is hampered by the low absorption coefficient of silicon. This work introduces a nano-light-mixer (NLM) array to address this hurdle. Silicon surface nanopillar (NP) arrays demonstrate efficient absorption of solar power. In this work, an NP is deformed into an NLM to form an array. The deformation entails the narrowing of the NP bottom diameter, and the introduction of sidewall surface decorations. A numerical investigation demonstrates an enhancement in broadband absorption of ∼25% under normal illumination compared with an optimized NP array. Superior omnidirectional absorption is shown. The broadband absorption of the NLM array is driven by transmission suppression, higher photon penetration depths, and the generation of greater light intensity distributions in the vertical and horizontal directions. Next, NLM and NP arrays are fabricated, and their light-trapping properties are examined with near-field scanning optical microscopy (NSOM). NSOM is employed to examine the period dependency of the far-field and near-field responses to 532 nm excitation (solar spectrum maximum). The NLM array is a promising approach to support optical absorption and light trapping for thin-film technologies.

Download full-text PDF

Source
http://dx.doi.org/10.1039/d4nr05050aDOI Listing

Publication Analysis

Top Keywords

omnidirectional absorption
12
nlm array
12
broadband omnidirectional
8
absorption
8
absorption solar
8
solar energy
8
broadband absorption
8
solar
5
nlm
5
array
5

Similar Publications

Broadband and omnidirectional absorption is the first requirement for any solar energy harvesting technology. For example, the realization of silicon thin-film photovoltaics is hampered by the low absorption coefficient of silicon. This work introduces a nano-light-mixer (NLM) array to address this hurdle.

View Article and Find Full Text PDF

Pixel-level metal blackbody microcavities via hierarchical laser writing.

Sci Adv

February 2025

State Key Lab of Modern Optical Instrumentation, Centre for Optical and Electromagnetic Research, College of Optical Science and Engineering; International Research Center (Haining) for Advanced Photonics, Zhejiang University, Hangzhou 310058, China.

Conventional blackbody cavities, known for their near-unity broadband omnidirectional emissivity (absorptivity), are however constrained by their large volume (e.g., >10 cm), imposing crucial restrictions on integration with existing devices.

View Article and Find Full Text PDF

Solar-driven interfacial evaporation is regarded as a green and sustainable strategy to address the global freshwater crisis. Nevertheless, it remains challenging to develop a photothermal structure with highly efficient evaporation under omnidirectional illumination. Herein, a three-dimensional multiscale pyramidal array photothermal structure (PAPS) was developed from the inspiration of durian skin.

View Article and Find Full Text PDF

Ultra-Broadband Perfect Absorbers Based on Biomimetic Metamaterials with Dual Coupling Gradient Resonators.

Adv Mater

December 2024

Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang, 110819, China.

Ultra-broadband metamaterial absorbers can achieve near-perfect absorption of omnidirectional electromagnetic waves, crucial for light utilization and manipulation. Traditional ultra-broadband metamaterials rely on the superposition of different resonator units either in the plane or in perpendicular directions to broaden absorption peaks. However, this approach is subject to quantity restrictions and complicates the fabrication process.

View Article and Find Full Text PDF

Blackbody radiation is incoherent and omnidirectional, whereas various novel applications in renewable energy require a degree of directional control of a thermally emitted beam. So far, such directional control has required nano-structuring the surface of a thermally emitting material, typically by forming diffraction gratings. This, however, necessitates lithography and usually results in polarization-dependent properties.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!