In the Keshen Gas Field in Kuqa Piedmont, the Cretaceous Bashijiqike formation is the main producing layer. The deepest exploratory wells exceed 8000 m, with reservoir pressures reaching 150 MPa, temperatures peaking at 190 °C, and formation thicknesses ranging from 100 to 300 m. The extreme operating conditions and well-controlled risks limit the testing methods after stimulation. Therefore, it is necessary to get a clear understanding of whether this kind of reservoir can be stimulated by network fracturing and how to determine whether it has been effectively fractured. By summarizing the commonly used network fracturing technologies for the ultra-deep reservoirs in Kuqa Piedmont and based on the geological and mechanical conditions affecting the formation of longitudinal and transverse fracture networks, the geological and engineering factors forming complex fracture network by coupling extension of artificial fractures and natural fractures are analyzed. Theoretical variations in operating curves during successful temporary plugging and diversion are investigated. The actual operating curve and theoretical curve are compared and analyzed after the temporary plugging diversion agent enters the artificial fractures. Combined with the microseismic monitoring and interpretation of wells after network fracturing, the analysis conclusions are mutually verified. Comprehensive research results suggest that, for ultra-deep and extremely thick reservoirs with well-developed natural fractures, theoretically, the transverse fracture network and multilayer stimulation can be achieved through fracturing. Currently, the technologies of temporary plugging diversion inside fractures and temporary plugging layering at the fracture opening are ineffective. Therefore, it is important to research ultra-deep temporary plugging layering and temporary plugging diversion technologies, which can provide strong technical support for exploration breakthroughs and efficient exploration for reservoirs deeper than 8000 m.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11886745PMC
http://dx.doi.org/10.1021/acsomega.4c09675DOI Listing

Publication Analysis

Top Keywords

temporary plugging
24
network fracturing
16
plugging diversion
16
ultra-deep extremely
8
extremely thick
8
thick reservoirs
8
reservoirs kuqa
8
kuqa piedmont
8
transverse fracture
8
fracture network
8

Similar Publications

In the Keshen Gas Field in Kuqa Piedmont, the Cretaceous Bashijiqike formation is the main producing layer. The deepest exploratory wells exceed 8000 m, with reservoir pressures reaching 150 MPa, temperatures peaking at 190 °C, and formation thicknesses ranging from 100 to 300 m. The extreme operating conditions and well-controlled risks limit the testing methods after stimulation.

View Article and Find Full Text PDF

Cellulose nanofiber-reinforced supramolecular polymer gels for temporary plugging of fractured oil and gas reservoirs.

Carbohydr Polym

May 2025

School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China; Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China; State Key Laboratory of Deep Oil and Gas, China University of Petroleum (East China), Qingdao 266580, China. Electronic address:

The development of oil and gas from fractured reservoirs is hindered by reservoir complexity, wellbore instability, lost circulation, and formation fluid intrusion during drilling. Various plugging materials and strategies have been employed; however, physical plugging materials often suffer from mismatched particle and fracture sizes, while chemical plugging materials face challenge with low plugging strength as well as tedious operation conditions. In addition, achieving both high plugging effectiveness during use and superior degradability after service remains a challenge.

View Article and Find Full Text PDF

For the purpose of efficient temporary plugging and self-removal of the plugging of reservoir formations, the thermally induced expandable and acid-generating temporary plugging agent (TAPA) was prepared with acrylonitrile (AN), methacrylic acid (MAA), ,-dimethylacrylamide (DMAA), and butyl acrylate (BA) as the shell monomers as well as the carboxylate esters with high boiling points as the core material. The TAPA was structurally characterized, and the properties were studied. The results showed that the TAPA had a good spherical structure with a median particle size (D50) of 16.

View Article and Find Full Text PDF

Fibrin-glue-assisted retinopexy for coloboma-associated retinal detachment.

Indian J Ophthalmol

December 2024

Srimati Kanuri Santhamma Center for Vitreo-Retinal Diseases, Anant Bajaj Retina Institute, L. V. Prasad Eye Institute, Hyderabad, Telangana, India.

Background: Retinal detachment (RD) is common (23%-40%) in eyes with uveal coloboma due to early vitreous syneresis, inherent defects at the locus minoris resistentiae, and breaks in intercalary membrane (ICM).[1] Managing eyes with coloboma RD is difficult due to complexity of accessing and repairing retinal breaks. In RD surgeries, tamponade agents are used to provide surface tension across retinal breaks to prevent further fluid flow into the subretinal space until the effect of retinopexy is permanent.

View Article and Find Full Text PDF

Self-Degradable Rubber Plug for Temporary Plugging and Its Degradation Mechanism.

Gels

September 2024

College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023, China.

Article Synopsis
  • A self-degradable rubber plug (SDRP) was created to improve temporary plugging technologies by enhancing degradation properties.
  • The SDRP's optimized formula includes specific percentages of monomer, initiator, crosslinker, and degradation catalyst, allowing it to transform from liquid to solid gel within 30-110 minutes at elevated temperatures.
  • The degradation process lasts 3-10 days, during which the unstable crosslinker breaks down under heat and catalyst influence, leading to lower viscosity and increased water mobility until the plug fully degrades.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!