This study investigated the effectiveness of free nitrous acid (FNA) on mitigating membrane fouling, with the associated mechanisms, in two nitritation membrane bioreactors (MBRs) operated with Nitrosomonas-enriched culture. Results showed that FNA stress, regulated by pH and nitrite concentration, maintained a low-level fouling as opposed to the control MBR where trans-membrane pressure (TMP) exceeded 30 kPa. Compared to the control MBR, production of biofilm in the FNA stressed MBR was reduced by 68.1% in terms of mass and 78.2% in terms of thickness. Suspended biomass and biofilm extracellular polymeric substances (EPS) characterized by liquid chromatography (LC-OCD-OND) indicated FNA stress reduced the amount of low molecular weight neutrals and hydrophobic dissolved organic carbon. These components would have had high fouling potential. Excitation emission matrix (EEM) fluorescence contours indicated that exposure to FNA stimulated the production of tyrosine-like proteins but reduced those of SMP like and humic acid-like substances. This could have affected the adhesion between bacteria and membrane and so contributed to the reduced biofilm and fouling. X-ray photoelectron spectroscopy (XPS) analysis revealed marked differences in intensities of the main functionalities in the EPS for both sludge and biofilm, due to the oxidative effect of FNA, e.g. FNA stress resulted in more aliphatic C-OH, amines and amides while the control had more C=O, amino acids and amino sugars. This study showed that in-situ generated FNA could be employed to mitigate membrane fouling effectively via its biocidal and oxidative effect.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.watres.2025.123446DOI Listing

Publication Analysis

Top Keywords

membrane fouling
12
fna stress
12
free nitrous
8
nitrous acid
8
extracellular polymeric
8
polymeric substances
8
nitritation membrane
8
fna
8
control mbr
8
membrane
6

Similar Publications

This study introduces a novel application of electrocoagulation (EC) as a pretreatment method for seawater desalination, uniquely focusing on reducing organic and biological fouling in reverse osmosis membranes. The EC process was investigated as an alternative to conventional approaches such as chemical coagulation, chlorination, and fouling inhibitors. EC was conducted in a batch cell using iron electrodes.

View Article and Find Full Text PDF

Oil production entails the generation of large volumes of complex effluents that contain emulsified oil in water. Difficult to manage, the use of membrane separation processes (MSP) is an interesting option for the treatment of oily effluents, separating oil-in-water (o/w) emulsions with high efficiency. Modifying the surface of membranes with metals minimizes fouling, which is the main drawback of MSP.

View Article and Find Full Text PDF

This study investigated the effectiveness of free nitrous acid (FNA) on mitigating membrane fouling, with the associated mechanisms, in two nitritation membrane bioreactors (MBRs) operated with Nitrosomonas-enriched culture. Results showed that FNA stress, regulated by pH and nitrite concentration, maintained a low-level fouling as opposed to the control MBR where trans-membrane pressure (TMP) exceeded 30 kPa. Compared to the control MBR, production of biofilm in the FNA stressed MBR was reduced by 68.

View Article and Find Full Text PDF

Enhancing textile wastewater reuse: Integrating Fenton oxidation with membrane filtration.

J Environ Manage

March 2025

Ondokuz Mayıs University, Engineering Faculty, Environmental Engineering Department, Kurupelit, Samsun, Türkiye.

The textile industry produces large volumes of wastewater with complex organic pollutants, dyes, and chemicals that are challenging to treat. This study introduces an integrated approach combining Fenton oxidation and membrane filtration in a continuous flow system to improve textile wastewater treatment. The study optimized the removal efficiencies of COD, TOC, and colour by varying the dosages of Fe and HO, as well as adjusting the pH and flow rates.

View Article and Find Full Text PDF

Membrane fouling is the major technology issue facing the wide application of electrodialysis (ED) for water purification in real world cases. The fouling of membrane in ED leads to reduce the removal rate, increase in membrane damage, and it requires continuous costly maintenance. Herein, a successful dual process combining ED and electrocoagulation (EC) was designed to combat anionic membrane (AMX) fouling and to boost organic dye pollutant (methyl orange, (MO)) removal efficiency.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!