Liquid crystal monomers (LCMs) are a class of emerging organic pollutants widely used in liquid crystal displays (LCDs) of various electronic products. LCMs can easily be released from LCDs into indoor environments and may pose potential environmental and health risks. Meanwhile, LCMs exhibit a wide range of saturation vapor pressures (PL) and octanol-air partition coefficients (Koa), which enable their presence in various indoor metrices. However, current research on LCMs within indoor multi-medium contexts remains limited. The development of effective analytical methods could significantly advance related research endeavors. This study developed a method using ultrasonic extraction to extract 70 LCMs from dust, gas, and particle samples, and analyzed them using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC × GC-TOF MS). The recoveries of 70 LCMs in dust, gas and particle phases ranged from 77.7 % to 116 %, 73.8 %-127 %, and 62.1 %-147 %, respectively. The instrument's detection limits and quantification limits were 0.01-1.10 ng/mL and 0.04-3.67 ng/mL, respectively. This demonstrated that the method exhibited satisfactory accuracy and sensitivity, and was further applied to analyze 70 LCMs in indoor dust, gas, and particle phases. 52 LCMs were detected in all three matrices, with significant differences in the distribution of these LCMs across the multi-medium. This method is suitable for determining LCMs concentrations in dust, gas, and particle phases, facilitating a more comprehensive analysis of the occurrence levels of indoor LCMs, and providing a technical reference for future studies on the partitioning behavior and risk assessment of LCMs in indoor multi-medium environments, thereby enhancing our understanding of their environmental impact.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.aca.2025.343821DOI Listing

Publication Analysis

Top Keywords

dust gas
16
gas particle
16
liquid crystal
12
lcms
12
lcms indoor
12
particle phases
12
crystal monomers
8
ultrasonic extraction
8
comprehensive two-dimensional
8
two-dimensional gas
8

Similar Publications

Liquid crystal monomers (LCMs) are a class of emerging organic pollutants widely used in liquid crystal displays (LCDs) of various electronic products. LCMs can easily be released from LCDs into indoor environments and may pose potential environmental and health risks. Meanwhile, LCMs exhibit a wide range of saturation vapor pressures (PL) and octanol-air partition coefficients (Koa), which enable their presence in various indoor metrices.

View Article and Find Full Text PDF

PM-bound elements in Luanda's urban atmosphere: Concentrations, sources, and their environmental and health impacts.

Environ Pollut

March 2025

CIMO, LA SusTEC, Instituto Politécnico de Bragança, Campus de Santa Apolónia, 5300- 253, Bragança, Portugal.

An unprecedented study was carried out in the megacity of Luanda, Angola, involving daily sampling of particulate matter (PM) from June to November 2023. The analysis was focused on the detection of 56 metal(loid)s and complemented by the application of several contamination and health risk indices. PM levels ranged from 23.

View Article and Find Full Text PDF

Indoor air pollution is a common problem in poultry and many livestock facilities. Small airborne amino chemicals (AACs), such as ammonia and short-chain amines, are common air pollutants in poultry farms. An elevated concentration of AACs can reduce the indoor air quality (IAQ) of the farm, affecting the production of chicken eggs, the welfare of the animals, and the occupational health of producers.

View Article and Find Full Text PDF

This study investigates the impact of vehicular-released heavy metals (Zn, Fe, Pb, Cd, and Ni) on foliar physiological and biochemical parameters of Conocarpus erectus and its relationship with the Air Pollution Tolerance Index (APTI). Leaf samples were collected from six sites along a busy road (Bahawalpur to Rahim Yar Khan, KLP Road) in Punjab, Pakistan, during the spring season, with control samples taken 50 m away from the roadside. Heavy metal concentrations were analyzed using an Atomic Absorption Spectrophotometer (AAS), revealing significantly higher levels of Pb, Cd, Ni, and Cu in leaf dust at polluted sites, particularly in Ahmadpur.

View Article and Find Full Text PDF

Occultation constraints on solar system formation models.

Philos Trans A Math Phys Eng Sci

February 2025

Southwest Research Institute, 1301 Walnut St., Suite 400, Boulder, CO 80302, USA.

The process by which a system of non-luminous bodies form around a star is fundamental to understanding the origins of our own solar system and how it fits into the context of other systems we have begun to study around other stars. Some basics of solar system formation have emerged to describe the process by which dust and gas around a newly formed star evolve into what we see today. The combination of occultation observations and the flyby observations by New Horizons of the Cold-Classical Kuiper Belt Object (CCKBO), (498958) Arrokoth, has provided essential new constraints on formation models through its three-dimensional shape.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!