Magnetic aromatic polyamide (MAPA) composites were synthesized using a green mechanochemical ball milling process and used for magnetic solid-phase extraction (MSPE) and detection of trace level fluoroquinolone antibiotics (FQs) from water samples. The formation of MAPAs was facilitated by deep eutectic systems (DESys) created from magnetic beads and organic monomers during ball milling. A comprehensive study was conducted to investigate the kinetics, thermodynamics, and mechanisms of MAPA adsorption of ciprofloxacin hydrochloride (CIP) and ofloxacin (OFL) from water. The maximum adsorption capacities for CIP and OFL were found to be 151.5 mg/g and 164.1 mg/g, respectively. Additionally, the recyclability and selective adsorption capabilities of MAPAs were evaluated. MAPAs were subsequently used for MSPE of CIP and OFL in water samples. Both UV-Vis spectrometry and HPLC methods can be used for analysis, the MSPE-HPLC method showed superior linearity for CIP (0.06-1500 μg/L) and OFL (1-1200 μg/L), with R² values of 0.9995 and 0.9999, and limit of detection (LOD) as low as 0.006 μg/L and 0.02 μg/L, respectively. Both analytical methods are highly effective and practical for use with real water samples. MAPA used for MSPE offer a promising green approach for detecting antibiotic contamination in aquatic ecosystems.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.chroma.2025.465830 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Role of carbon materials on the aging-resistance of zero-valent aluminum for pollutant removal.
J Colloid Interface Sci
March 2025
Key Laboratory of Marine Environment and Ecology, Ministry of Education, Qingdao 266100, China; Shandong Provincial Key Laboratory of Marine Environment and Geological Engineering (MEGE), Qingdao 266100, China; College of Environmental Science and Engineering, Ocean University of China, Qingdao 266100, China. Electronic address:
In recent years, zero-valent aluminum (ZVAl) has attracted significant attention as a novel material in the field of water treatment. However, its high reactivity leads to rapid aging when exposed to air, limiting its preservation and practical utilization. To address this issue, carbon materials modified ZVAl (C@ZVAl) were prepared by mechanical ball-milling to improve the aging resistance of ZVAl.
View Article and Find Full Text PDFEfficient bamboo biorefining based on liquid hot water pretreatment: Co-production of xylo-oligosaccharides and lignin-containing cellulose nanofiber films.
Int J Biol Macromol
March 2025
Institute of Zhejiang University-Quzhou, 99 Zheda Road, Quzhou, Zhejiang Province 324000, China; Key Laboratory of Biomass Chemical Engineering of Ministry of Education, Zhejiang University, Hangzhou 310027, China. Electronic address:
Liquid hot water (LHW) pretreatment is an environmentally friendly that uses hot water under certain pressure to break down biomass in the absence of chemicals. In this paper, bamboo was used as the substrate to prepare the lignin-containing cellulose nanofibers (LCNFs) and xylo-oligosaccharides (XOS) using LHW strategy. The results showed that a total xylose yield of 63.
View Article and Find Full Text PDFIncreasing the adsorption efficiency of coal bottom ash modified by high-energy ball milling for dyed pollutant removal in water medium.
Environ Sci Pollut Res Int
March 2025
Department of Chemical Engineering, Federal University of Santa Maria, Santa Maria, 97105-900, Brazil.
In this study, coal bottom ash particles were modified through high-energy ball milling and evaluated for the removal of methyl violet 10B (MV) dye from aqueous environment via the adsorption process. The presence of a partially amorphous structure with nano- and submicron particles, containing silanol group (Si-OH), along with higher surface area and pore volume values compared to the unmodified sample, was confirmed by different characterization methods, including X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), BET analysis, scanning electron microscopy (SEM/EDS), and laser granulometry. These characteristics provided an appreciable adsorptive activity to the modified material, achieving an adsorption capacity of 27.
View Article and Find Full Text PDFSolvent-free fabrication of an NiP/UiO-66 catalyst for the hydrogenation of furfural to cyclopentanone.
Dalton Trans
March 2025
Key Laboratory of Jiangxi Province for Environment and Energy Catalysis, School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, P. R. China.
Dispersing metal phosphides on supports with large surface areas is a feasible way to boost the catalytic hydrogenation performance. However, metal-organic frameworks (MOFs), which are very promising porous materials, have rarely been used to load metal phosphides owing to the harsh synthesis conditions of metal phosphides. This work demonstrated a facile and solvent-free method to construct a highly dispersed NiP/UiO-66 catalyst (the particle size of NiP was 2.
View Article and Find Full Text PDFStructural insights of mechanochemically amorphised MIL-125-NH.
Chem Commun (Camb)
March 2025
School of Physical and Chemical Sciences, University of Canterbury, Private Bag 4800, Christchurch 8140, New Zealand.
In this work, we investigated the response of the metal-organic framework MIL-125-NH to ball-milling. Both localised and bulk analyses revealed prolongued ball-milling results in a complete loss of long-range structural order. Investigation of this disorder revealed partial retention of the local bonding of the secondary building unit, suggesting structure collapse progressed primarily through metal-linker bond breakage.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!