Background: Primary retention and progressive loss of retention of various attachment systems are critical elements in appropriate attachment selection; nevertheless, research on attachment retention reveals a broad spectrum of retention values for the same attachment system and between various systems. Accordingly, the aim of this study was to compare the retention of two different types of attachments (Ti Si snaps and locators) in two-implant-retained mandibular overdentures.

Methods: A completely edentulous mandibular educational cast was scanned. An STL file including the implant beds and mucosal space was designed. Two implant analogs were incorporated into each model in the canine area bilaterally, and conventional overdentures were fabricated over two types of implant attachments, the Ti Si snap attachments and the locator attachments, with the use of Retention sil in both groups at the fitting surface of the overdenture. Each group contained five 3D-printed edentulous mandibular models. Retention was measured by using a universal testing machine after the models were subjected to cyclic loading. This measurement was carried out at the time of insertion, after 75,000 cycles (simulating 6 months of clinical use) and 150,000 cycles (simulating 12 months of clinical use). The means and standard deviations of the recorded readings were collected, tabulated, and statistically analyzed.

Results: Student's t test revealed significant differences between the two groups. The Ti Si attachment group presented the highest retention rate at the time of insertion and after 6 months. However, there was no significant difference between the groups after 12 months. Both groups presented statistically significant changes in the mean retention value over time, as demonstrated by two-way ANOVA (time of insertion > six months > twelve months). Tukey's post hoc test revealed a nonsignificant difference between six months and twelve months.

Conclusion: Within the limitations of this study, the following conclusions can be drawn.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11869697PMC
http://dx.doi.org/10.1186/s12903-025-05625-yDOI Listing

Publication Analysis

Top Keywords

retention
11
locator attachments
8
attachments retention
8
retention sil
8
edentulous mandibular
8
time insertion
8
cycles simulating
8
simulating months
8
months clinical
8
test revealed
8

Similar Publications

Background: Flexible optical intubation (FOI) is the preferred technique for managing anticipated difficult airways, particularly in awake patients when anatomical factors complicate conventional laryngoscopy. Mastering the procedure requires skills, but a comprehensive overview of the evidence on training and assessment of FOI skills is lacking. There is no evidence-based consensus on educational strategies and recommendations for skill acquisition and retention, thus highlighting a significant gap in airway management training.

View Article and Find Full Text PDF

Objectives: This in vitro study evaluated the effects of simulated toothbrushing on surface roughness, gloss, and color stability of milled and printed resin-based and lithium disilicate materials for permanent dental restorations.

Materials And Methods: Five materials were tested, including CAD/CAM prepolymerized resin blocks, a ceramic material, a resin composite and a newly FDA-cleared 3D-printed resin for permanent crowns. Specimens underwent a controlled brushing protocol simulating 5 years of brushing (50,000 cycles).

View Article and Find Full Text PDF

Layered vanadium-based oxides with preintercalated metal cations are attracting extensive attention as highly promising candidates for aqueous zinc-ion batteries (AZIBs) due to the increase in structural stability originating from the pillar effect. However, the strong electrostatic interaction between the rigid metal cation pillars and zinc ions results in sluggish ionic transport, thereby limiting the high-rate performance. Herein, a layered vanadium-based oxide with protonated 1,4-diaminobutane organic cation (BDA) pillars is designed as a cathode material for AZIBs.

View Article and Find Full Text PDF

Single -crystal sodium nickel phosphate nanoparticles as supercapacitor cathodes with ultra-high capacitance and rate-performance.

Nanoscale

March 2025

Key Laboratory of Applied Surface and Colloid Chemistry, Shaanxi Normal University, Ministry of Education, Xi'an, 710062, P. R. China.

Sodium nickel phosphate (NaNiPO, NNP) is an attractive cathode material for high performance supercapacitors due to its abundance of active sites for oxidation/reduction, highly stable framework structure, . However, its disadvantages of low electric conductivity, disturbances of its impure crystalline phase, and the numerous pores/gaps produced by agglomerated polycrystalline morphologies in this cathode often limit its electrochemical performance. Herein, single-crystalline NNP rod-like nanoparticles with high phase purity have been prepared by spontaneous combustion combined with subsequent solid-phase calcination.

View Article and Find Full Text PDF

Background: Despite favorable hemodynamic and neurohormonal effects, endothelin receptor antagonists have not improved outcomes in patients with heart failure (HF), possibly because they cause fluid retention.

Methods: In this randomized, double-blind, multicenter trial (SERENADE [Macitentan in Heart Failure With Preserved Ejection Fraction and Pulmonary Vascular Disease]), we evaluated the effects of an endothelin receptor antagonist, macitentan, in patients with HF, left ventricular ejection fraction ≥40%, and pulmonary vascular disease. After a 4-week placebo run-in (to ensure clinical stability), followed by a 5-week single-blind macitentan run-in, patients who did not exhibit fluid retention were randomized to macitentan or placebo.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!