The granular bases commonly used in the construction of road infrastructure projects often require a high consumption of raw materials. The potential utilization of recycled materials, specifically Reclaimed Asphalt Pavement (RAP) derived from road asphalt pavement demolition, emerges as a promising sustainable advantage for infrastructure projects, considering its potential environmental and cost benefits in other layers of the structure. In this context, this research proposes a feasibility study on the use of RAP as a granular base layer, supported by an advanced laboratory analysis that includes a range of tests simulating the in-service conditions as well as a full-scale demonstration of the material behavior under static and dynamic loads. Various design variables, such as different gradations and binder content, are considered. The results demonstrate that, despite having discontinuous gradation and smaller aggregate sizes than those commonly applied in natural base layers, the evaluated recycled materials exhibit a higher load-bearing capacity and resistance to permanent deformation than the reference materials commonly used as granular bases. Notable enhancements of up to 30% in elastic modulus, coupled with reductions of around 20% in permanent deformations, have been documented using the asphalt cement potential in the old pavement.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11857242 | PMC |
http://dx.doi.org/10.3390/ma18040854 | DOI Listing |
Materials (Basel)
March 2025
School of Highway, Chang'an University, Middle Section of South Erhuan Road, Xi'an 710064, China.
The environmental pollution caused by waste plastics has raised widespread concern within the global academic community. The use of waste plastic in road construction is seen as a future trend for road materials, offering benefits such as energy conservation, pollution reduction, and the enhanced high-temperature performance of asphalt mixtures. However, conventional testing methods have limited the scope of performance measurements for modified asphalt mixtures, and fewer studies have explored the pavement performance of such mixtures.
View Article and Find Full Text PDFMaterials (Basel)
March 2025
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.
Asphalt pavement has become a vital component of modern highway construction due to its high wear resistance, short construction period, economic viability, and excellent skid resistance. However, increasing traffic volume has heightened the structural performance requirements of asphalt pavement, especially during compaction. The compaction degree of asphalt mixtures has emerged as a key indicator for assessing construction quality.
View Article and Find Full Text PDFMaterials (Basel)
March 2025
Shaanxi Zhouzhi County Transportation Bureau, Xi'an 710064, China.
The substantial voids of porous pavement materials permit light and exhaust pollutants to infiltrate to a considerable depth. Consequently, utilizing porous mixtures as carriers for photocatalytic materials enables greater exposure to an environment conducive to the exhaust degradation reaction. This study employed porous asphalt mixtures and porous cement concrete as carriers for photocatalytic pavements.
View Article and Find Full Text PDFMaterials (Basel)
February 2025
School of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China.
The double-layer one-time-paving technology for asphalt mixtures enhances the interlayer adhesion and stability of pavement by simultaneously laying and compacting two layers of asphalt mixture, demonstrating improvements over traditional layer-by-layer paving and compaction methods. Based on this technology, the effects of paving techniques, mixture types, and structural layer thickness on the low-temperature crack resistance of pavement at -10 °C were investigated. Results indicated that, compared to traditional paving methods, the maximum tensile strain and bending strain energy density of pavement using the double-layer one-time-paving technique increased by at least 14% and 20%, respectively, under a 95% confidence level.
View Article and Find Full Text PDFMaterials (Basel)
February 2025
School of Highway, Chang'an University, South Erhuan Middle Section, Xi'an 710064, China.
In order to utilize a large amount of waste scallop shells in road engineering and develop environmentally friendly and high-performance asphalt, the impact of scallop shell powder (SSP) on the high temperature performance of base asphalt and styrene-butadiene-styrene (SBS)-modified asphalt was evaluated in this study. The effects of SSP on the conventional properties of base asphalt and SBS-modified asphalt were investigated according to penetration, softening point, ductility, and rotational viscosity at 135 °C, and recommended dosing amounts were given, respectively. The high-temperature rheological properties of SSP-modified asphalt were evaluated according to temperature sweep and multiple stress creep and recovery (MSCR) tests.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!