Background: Cystoscopy-assisted submucosal injections of urethral bulking agents offer a safe and efficient alternative to surgery for treating urinary incontinence in both dogs and women. To address the concern of their transient therapeutic effect, a preclinical study evaluating the biocompatibility, safety, and durability of nanofibrillated cellulose as a bulking agent was designed. Plant-based nanofibrillated cellulose is considered renewable, biocompatible, and non-degradable in vivo. To the best of our knowledge, no studies of nanofibrillated cellulose injected into the urethral wall of experimental animals have been published to date.
Methods: After assessing the rheological behavior of nanofibrillated cellulose, a biocompatibility study with 50 rats and a durability study with two Beagle dogs were conducted. In anesthesized rats, deposits of either nanofibrillated cellulose or sodium chloride as an inert control were injected into the urethral wall via a caudal laparotomy. The rats were euthanized for histopathological assessment after 7, 30, and 90 days. In dogs, cystoscopy-assisted injections of nanofibrillated cellulose were followed with magnetic resonance imaging at 14 days and at 2, 3, 6, and 12 months.
Results: The rheological studies demonstrated a gel-like behavior under a wide range of shear stress. Nanofibrillated cellulose induced a moderate host tissue response according to the EN ISO 10993-6 standard, consisting primarily of macrophages, foreign body giant cells, lymphocytes, and plasma cells. No significant difference was observed in the tissue response at different time points. In dogs, the bulking agent was visible in 4/5 (80%) injection sites on magnetic resonance imaging at 12 months post-injection. No signs of migration, abscess formation or any major or long-term complications were observed.
Conclusions: Nanofibrillated cellulose maintains a chronic but stable and tolerable inflammatory response for up to 90 days in the urethral wall of rats. Durability in the urethral wall of dogs indicates a potential long-term effect.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11849868 | PMC |
http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0317859 | PLOS |
Nanoscale
March 2025
KTH Royal Institute of Technology, Department of Fiber and Polymer Technology, School of Engineering Sciences in Chemistry, Biotechnology and Health, Teknikringen 56, SE-100 44 Stockholm, Sweden.
Biobased cellulose nanofibrils (CNFs) constitute important building blocks for biomimetic, nanostructured materials, and considerable potential exists in their hybridization with tailorable polymeric nanoparticles. CNFs naturally assemble into oriented, fibrillar structures in their cross-section. This work shows that polymeric nanoparticle additives have the potential to increase or decrease orientation of these cellulose structures, which allows the control of bulk mechanical properties.
View Article and Find Full Text PDFSci Rep
March 2025
Cellulose and Wood Materials Laboratory, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland.
This study investigates lignocellulose nanofibrils (LCNF) as a sustainable alternative material for printed circuit board (PCB) substrates, demonstrating an application through the development of an eco-friendly computer mouse demonstrator. LCNF is derived from lignin-rich cellulose pulp, a side stream product of biorefinery processes, combining the natural strength of cellulose fibrils with lignin to enhance mechanical and electrochemical properties. The research outlines the process of fibrillating lignin-rich cellulose pulp at 10 kW/h per kg into LCNF, followed by thermal and pressure treatment (at Δp = 50 - 1500 kN, ΔT = 30 - 120 °C) to achieve a rigid PCB substrate.
View Article and Find Full Text PDFACS Nano
March 2025
Beijing Key Laboratory of Lignocellulosic Chemistry, Engineering Research Center of Forestry Biomass Materials and Energy, Ministry of Education, Beijing Forestry University, Beijing 100083, China.
Inspired by the reinforcement mechanisms observed in biomaterials, cellulose/lignin composite membranes are prepared successfully by mixing nanolignin and nanocellulose and impregnating them with metal ion solution. Metal ion cross-linking and hydrogen bonds between cellulose and lignin create a robust cross-linking network. The composite films achieve a tensile strength of 223.
View Article and Find Full Text PDFACS Appl Bio Mater
March 2025
Institute of Wood Science, Universität Hamburg, Haidkrugsweg 1, 22885 Barsbüttel, Germany.
The growing interest in gel-based additive manufacturing, also known as three-dimensional (3D) gel-printing technology, for research underscores the crucial need to develop robust biobased materials with excellent printing quality and reproducibility. The main focus of this study is to prepare and characterize some composite gels obtained with a low-molecular-weight gelling (LMWG) peptide called Fmoc-diphenylalanine (Fmoc-FF) and two types of cellulose nanofibrils (CNFs). The so-called Fmoc-FF peptide has the ability to self-assemble into a nanowire shape and therefore create an organized network that induces the formation of a gel.
View Article and Find Full Text PDFInt J Biol Macromol
March 2025
Nuclear and Energy Research Institute, IPEN-CNEN/SP, Av. Prof. Lineu Prestes, 2242 - Cidade Universitária, CEP 05508-000, São Paulo, SP, Brazil.
This study investigates the potential of pineapple leaf fiber (PALF), as a renewable source, to produce cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC), addressing a gap in the literature regarding optimal conditions for CNC extraction from PALF. Chemical analysis revealed a high α-cellulose content (78.14 %), making PALF suitable for nanocellulose production.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!