Skin-inspired polysaccharide-based hydrogels with tailored properties for information transmission application.

Int J Biol Macromol

The Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi, 214122, China. Electronic address:

Published: February 2025

Conductive hydrogels have attracted significant research interest in flexible electronics owing to their intrinsic flexibility and biocompatibility. However, the rapid and sustainable fabrication of green conductive hydrogels with excellent mechanical and conductive properties remains a significant challenge. Inspired by the structure of human skin, modified polysaccharide-reinforced polyvinyl alcohol (PVA) ionic conductive hydrogels with tailored properties were developed through Zn coordination and Hofmeister effect. The results demonstrated that precisely tunable mechanical properties (σ = 0.39-1.93 MPa, ε = 501-1010 %) and conductivity (IC = 0.26-1.10 S/m) were achieved through the regulation of ionic concentrations at relatively low levels. The enhancement in both mechanical and conductive properties arose from multiscale interactions, including the formation of dense nanofibril networks and crystalline domains, alongside multiple metal coordination and hydrogen bonding interactions. Meanwhile, the conductive hydrogel exhibits a low strain detection limit (2 %), highlighting its promising applications in human health monitoring. Crucially, a wireless information transmission system was developed based on this ionic conductive hydrogel, aimed at facilitating information transmission for deaf-mute individuals. This work presents an eco-friendly and biomimetic strategy for fabricating ionic conductive hydrogels with tailored properties, expanding their advanced applications in flexible sensing.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.ijbiomac.2025.141354DOI Listing

Publication Analysis

Top Keywords

conductive hydrogels
16
hydrogels tailored
12
tailored properties
12
ionic conductive
12
conductive
8
mechanical conductive
8
conductive properties
8
conductive hydrogel
8
properties
6
hydrogels
5

Similar Publications

Lithium Bond-Mediated Molecular Cascade Hydrogel for Injury-Free and Repositionable Adhesive Bioelectronic Interfaces.

Adv Mater

March 2025

Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education, School of energy and power engineering, Dalian University of Technology, Dalian, 116024, P. R. China.

Flexible bioelectronic interfaces with adhesive properties are essential for advancing modern medicine and human-machine interactions. However, achieving both stable adhesion and non-damaging detachment remains a significant challenge. In this study, a lithium bond-mediated molecular cascade hydrogel (LMCH) for bioelectronic interfaces is designed, which facilitates robust adhesion at the tissue level and permits atraumatic detachment for repositioning as required.

View Article and Find Full Text PDF

The modern era demands multifunctional materials to support advanced technologies and tackle complex environmental issues caused by these innovations. Consequently, material hybridization has garnered significant attention as a strategy to design materials with prescribed multifunctional properties. Drawing inspiration from nature, a multi-scale material design approach is proposed to produce 3D-shaped hybrid materials by combining chaotic flows with direct ink writing (ChDIW).

View Article and Find Full Text PDF

Soybean protein isolates (SPIs) have been widely studied because of their excellent gel-forming properties. However, their unstable gel structures and poor strength limit their applications in the food industry. To address this, konjac glucomannan (KGM) and oxidized chitin nanocrystals (O-ChNCs) were introduced into SPI-based hydrogels to enhance their mechanical properties.

View Article and Find Full Text PDF

We herein demonstrate the utility of gelatin methacryloyl (GelMA)/poly(ethylene glycol) diacrylate (PEGDA)-cerium oxide (CeO) hydrogel inks for manufacturing hydrogel scaffolds with antimicrobial efficacy by vat photopolymerization. For uniform blending with GelMA/PEGDA hydrogels, CeO nanoparticles with a round shape were synthesized by the precipitation method coupled with calculation at 600 °C. In addition, they had highly crystalline phases and the desired chemical structures (oxidation states of Ce and Ce) required for outstanding antimicrobial efficacy.

View Article and Find Full Text PDF

Evaluation of Physicochemical Properties of Polymeric Systems for Potential Applications in Cartilage Tissue Engineering.

Int J Mol Sci

February 2025

Department of Materials Engineering, Faculty of Materials Engineering and Physics, Cracow University of Technology, 37 Jana Pawla II Av., 31-864 Krakow, Poland.

This study investigates the physicochemical properties of hydrogels based on PVA and PVP crosslinked with PEGDA, focusing on their swelling capacity, surface roughness, incubation behavior, and structural modifications upon bioactive component incorporation. Swelling analysis demonstrated that the amount and molecular weight of PEGDA significantly influences the hydrogels' sorption properties, with the highest swelling coefficient observed for samples with 2 mL PEGDA (575 g/mol) due to a looser network structure, while the lowest was recorded for 2.5 mL PEGDA (700 g/mol), indicating a denser network.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!