Sustainable aqueous zinc ion batteries (AZIBs) necessitate a wide operational temperature range to ensure practicability, yet achieving this often compromises either reaction kinetics at low temperatures or cycling stability at high temperatures. Here we present an electrolyte design that balances this trade-off, enhancing the stability and kinetics of AZIBs across -60 to 60 °C. Our approach incorporates silk fibroin as a multifunctional additive into ZnCl-based "water-in-salt" electrolyte, which modifies both electrolyte structure and electrode interphase. Specifically, Zn||Zn half-cells with this electrolyte realize low hysteresis (180 mV at 1 mA cm) at -60 °C, and stable operation (200 hours at 2 mA cm) at 60 °C. This electrolyte is compatible with both inorganic and organic cathode materials. Remarkably, an ampere-hour-level Zn||VO ⋅ nHO pouch cell with this electrolyte achieves an energy density of ∼72 W h L with minimal capacity decay after 50 cycles at 0.5 A g. Furthermore, the pouch cell stably cycles across -60 to 60 °C. This strategy provides a powerful solution to the challenges of aqueous metal-ion batteries at extreme temperatures.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/anie.202500434 | DOI Listing |
ACS Appl Mater Interfaces
March 2025
Northwest Institute for Nonferrous Metal Research, Xi'an, Shannxi 710016, China.
Porous KTi(PO) nanoparticles are synthesized via a solvothermal method and subsequently modified with nitrogen-doped carbon layers by using polydopamine as the carbon source. The resultant KTi(PO)@N-doped carbon composite (KTP@NC) exhibits a preserved porous structure with abundant pores, facilitating ion diffusion and electrolyte infiltration. Various characterizations, including X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy, reveal the successful formation of an interconnected nitrogen-doped carbon network.
View Article and Find Full Text PDFAdv Mater
March 2025
Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, Guangdong, 518055, P. R. China.
P2-type NaNiMnO (NNMO) as cathode material for sodium-ion batteries (SIBs) largely suffers from continuous accumulation of local stress caused by destructive structural evolution and irreversible oxygen loss upon cycling, leading to rapid capacity degradation. Herein, a strategy of negative enthalpy doping (NED), wherein transition metal (TM) sites are substituted with 0.01 mol each Sn, Sb, Cu, Ti, Mg, and Zn to increase the stability of the TM layers, is proposed.
View Article and Find Full Text PDFNanomaterials (Basel)
March 2025
Grupo de Investigación de Nanotecnología Aplicada para Biorremediación Ambiental, Energía, Biomedicina y Agricultura (NANOTECH), Facultad de Ciencias Físicas, Universidad Nacional Mayor de San Marcos, Av. Venezuela Cdra 34 S/N, Ciudad Universitaria, Lima 15081, Peru.
The use of natural organic extracts in nanoparticle synthesis can reduce environmental impacts and reagent costs. With that purpose in mind, a novel biosynthesis procedure for the formation of magnetic iron-oxide nanoparticles (IONPs) using extract in an aqueous medium has been systematically carried out. First, the biosynthesis was optimized for various extract concentrations, prepared by decoction and infusion methods, and yielded IONPs with sizes from 4 to 9 nm.
View Article and Find Full Text PDFNanomaterials (Basel)
February 2025
College of Materials Science and Engineering, Xi'an University of Science and Technology, Xi'an 710054, China.
With the advancement of industrial production and urban modernization, pollution from heavy metal ions and the accumulation of solid waste have become critical global environmental challenges. Establishing an effective recycling system for solid waste and removing heavy metals from wastewater is essential. Coal gangue was used in this study as the primary material for the synthesis of a fully coal gangue-based phosphorus-silicon-aluminum (SAPO-5) molecular sieve through a hydrothermal process.
View Article and Find Full Text PDFJ Phys Chem Lett
March 2025
Center for Theoretical Biological Physics, Rice University, Houston, Texas 77005, United States.
Cell lysis is one of the most common biological processes in which viruses infect and destroy bacterial cells. It is accomplished by viruses stimulating cell hosts to produce holin proteins that assemble in cellular membranes and break them at specific times. One of the most surprising observations in cell lysis is that antiholin proteins that inhibit membrane permeabilization are also produced.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!