Hybrid Electric Vehicles (HEVs) demonstrate superior fuel efficiency and reduced emissions in comparison to conventional vehicles. To further enhance the HEV performance, Powell's based Artificial Bee Colony (ABC) heuristic approach is used. Powell's ABC focuses on the improved local search ability and increased speed of convergence. The multi parameter optimization approach with the PNGV constraints for the four differently weighted objective function parameters, the experiments were carried out for most generally used driving cycles FTP, ECE-EUDC and UDDS. Compared with the initial values, the proposed approach gives the improvement in the fuel efficiency by 10.03 % and the emissions are reduced to a maximum of 18.4 % and improved overall vehicle efficiency is 11.1 % for the ECE-EUDC driving cycle. For the UDDS driving cycle, fuel efficiency can be improved by 18.2 % and the emissions are reduced to a maximum of 43.24 %, improved overall vehicle efficiency 10.1 %. For FTP driving cycle fuel economy by 39.98 % and the emissions are reduced to a maximum of 43.75 %, improved overall vehicle energy efficiency up to 11.6 %. The findings indicate that Powell's ABC approach achieves faster convergence to a notably more precise final solution across various typical driving cycles compared to conventional methods.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11834066 | PMC |
http://dx.doi.org/10.1016/j.heliyon.2025.e42325 | DOI Listing |
Environ Sci Technol
March 2025
Laboratory for Earth Surface Processes, College of Urban and Environmental Sciences, Peking University, Beijing 100871, China.
Pelletization of biomass fuels has been promoted as an effective alternative to mitigate particulate matter (PM) emissions from the residential burning of raw biomass materials; however, environmentally persistent free radicals (EPFRs), a class of harmful components in PM, from the biomass pellet burning have been rarely studied yet. Here, laboratory-based combustion experiments were conducted to characterize EPFRs for different pellets burned in cooking and heating stoves and compared with those for the corresponding uncompressed biofuels. Emission factors (EFs) of EPFRs for biomass pellets ranged from 2.
View Article and Find Full Text PDFBioprocess Biosyst Eng
March 2025
Department of Mechanical Engineering, College of Engineering, Qassim University, 51452, Buraydah, Saudi Arabia.
This study presents the design and performance of microbial fuel cells (MFCs) utilizing sewage water as a renewable source for electricity generation. The proposed MFCs employ an air-cathode, single-chamber configuration that harnesses atmospheric oxygen as the electron acceptor, eliminating the need for consumable electron acceptor chemicals. Unlike traditional systems, no external microorganisms are introduced; instead, indigenous microbial communities present in sewage are utilized as efficient biocatalysts.
View Article and Find Full Text PDFNanomaterials (Basel)
February 2025
Institute of Materials and Environmental Chemistry, HUN-REN Research Centre for Natural Sciences, Magyar Tudósok Körútja 2, H-1117 Budapest, Hungary.
Hydrogen and fuel cell technologies are accepted by consensus as being part of the future energy system, especially in hard-to-abate segments where electrification is not an efficient solution [...
View Article and Find Full Text PDFNanomaterials (Basel)
February 2025
School of Materials Science and Engineering, Xi'an Key Laboratory of Textile Composites, Xi'an Polytechnic University, Xi'an 710048, China.
To enhance the electrocatalytic performance of a flexible Pd@CFs catalyst for methanol oxidation, deep cryogenic treatment in liquid nitrogen was introduced. The effects of the frequency and time of the deep cryogenic treatment on the surface crystal orientation, microstructure morphology, mechanical performance, and electrocatalytic performance for methanol oxidation were studied. The results showed that when the frequency of the deep cryogenic treatment was 2 times and the deep cryogenic time was 24 h, the electrocatalytic performance of the catalyst was the best.
View Article and Find Full Text PDFPhys Chem Chem Phys
March 2025
ICGM, Univ. Montpellier, CNRS, ENSCM, 34095 Montpellier, cedex 5, France.
Platinum-based nanoalloys are efficient electrocatalysts for the oxygen reduction reaction (ORR). measurements have revealed that key properties including induced strain, chemical composition, coordination environment, evolve significantly during operation, which can hampertheir effective implementation in fuel cells. In fact, recent studies indicate that the impact of the early surface activation steps of Pt-based nanoalloys has been hitherto underestimated and is an important factor contributing to loss of their initial electroactivity.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!