Electrochemical water splitting involving two-half chemical cell reactions is a promising approach to generate hydrogen and oxygen. Although this method is sustainable, the sluggish kinetics of the oxygen evolution reaction (OER) occurring at the anode due to a high overpotential is an issue to be addressed. Recently, various chemical and structural engineering approaches have been explored to improve the efficiency of the OER by reducing the overpotential. Among them, incorporating noble metals into the electrodes by doping or creating heterojunctions is an appealing approach to develop efficient OER electrocatalysts. Based on this principle, herein, we synthesized a bismuth-oxide (BiO) electrocatalyst incorporated with silver nanoparticles (Ag NPs) by a facile one-step hydrothermal method to take advantage of the high conductivity of Ag NPs and the low band gap along with fast redox reaction of BiO. With the Ag concentration in the hydrothermal precursor solution, the thickness of hydrothermally formed BiO nanoplates decreases, resulting in the increased electrochemical surface area (ECSA) from 71 to 300 cm. The optimal electrode, heterojunction-formed Ag-BiO (denoted H-Ag-BiO), exhibits the lowest overpotential of 260 mV for the OER at a current density of 10 mA cm with an excellent durability of 77.5% after stability tests for 240 h due to the number of active sites produced by Ag doping (manifesting defects), and heterojunction established between Ag nanoparticles and BiO nanoplates. The approach explored in this work could be further utilized to produce other effective electrocatalysts for accelerating OER performances.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.4c22156 | DOI Listing |
Small
March 2025
Xi'an Engineering Research Center of Environmental Nanocomposites, Shaanxi University of Science and Technology & Xi'an Frontier Materials Technology Co., LTD, Xi'an, 710116, China.
The crystalline CoP@ amorphous WP core-shell nanowire arrays are oriented grown on the Ni foam (CoP@WP/NF). The amorphous WP shell provides more active sites, and the interface charge coupling accelerates the kinetic of the catalytic reaction, making the CoP@WP/NF catalysts excellent activity. In acidic, only 13 and 97 mV overpotentials are needed to reach 10 mA cm and 100 mA cm, respectively, which are the lowest overpotentials among all reported Transition metal phosphide (TMP) catalysts, of course, much lower than that of the Pt/C catalyst (31 mV at 10 mA cm, 120 mV at 100 mA cm).
View Article and Find Full Text PDFSmall
March 2025
College of Materials Science and Engineering, Hunan Joint International Laboratory of Advanced Materials and Technology for Clean Energy, Hunan University, Changsha, 410082, P. R. China.
Transition metal selenides (TMSe) are promising oxygen evolution reaction (OER) electrocatalysts but act as precursors rather than the actual active phase, transforming into amorphous oxyhydroxides during OER. This transformation, along with the formation of selenium oxyanions and unstable heterointerfaces, complicates the structure-activity relationship and reduces stability. This work introduces novel "layered-hierarchical dual lattice strain engineering" to inhibit the surface reconstruction of NiSe by modulating both the nickel foam (NF) substrate with MoN nanosheets (NM) and the NiSe nanorods-nanosheets catalytic layer (NiSe-NiSe-NiO, NSN) with ultrafast interfacial bimetallic amorphous NiFeOOH coating, achieving the optimized NM/NSN/NiFeOOH configuration.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
March 2025
Jilin University, State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, 2699 Qianjin Street, 130012, Changchun, CHINA.
Reducing iridium packing density (gIr cm-3 electrode) represents a critical pathway to lower geometric Ir loading in proton exchange membrane water electrolyzers (PEMWEs), yet conventional approaches often cause performance issues of anode catalyst layer due to decreased structural stability and limited electron/mass transport efficiency. Here we present deformable hollow IrOx nanospheres (dh-IrOx) as a structural-engineered catalyst architecture that achieves an ultralow Ir packing density (20% of conventional IrO2 electrodes) while maintaining high catalytic activity and durability at reduced Ir loadings. Scalable synthesis of dh-IrOx via a hard-template method-featuring precise SiO2 nanosphere templating and conformal Ir(OH)3 coating-enables batch production of tens of grams.
View Article and Find Full Text PDFFoods
February 2025
LAQV-REQUIMTE & Department of Chemistry, University of Aveiro, Campus Universitário Santiago, 3810-193 Aveiro, Portugal.
The physicochemical and sensory properties of wines are influenced by several factors, starting in the vineyard and evolving during the winemaking stages. After bottling, variables such as bottle position, closure type, storage temperature, and storage time shape wine characteristics. In this study, red wines stored for approximately 0.
View Article and Find Full Text PDFMaterials (Basel)
February 2025
Faculty of Materials and Environmental Engineering, Technical University of Cluj-Napoca, 400641 Cluj-Napoca, Romania.
The recycling of spent automotive batteries is essential for minimizing their environmental impact. This requires eco-innovative methods with low cost and energy use. The present study explores the recycling of battery electrodes through the melt quenching method, a process that incorporates spent anode and cathode plates into a vitreous host matrix.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!