Li-O batteries urgently needs high discharge capacity and stable cycling performance, requiring effective and reliable bifunctional catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, Hovenia acerba Lindl-like heterostructure composed of cobalt sulfide and tin dioxide supported on carbon substrate (CoS/SnO@C) is prepared via CO laser irradiation technology. The half-wave potential of CoS/SnO@C for the ORR is 0.88 V, while the overpotential of the OER at 10 mA cm is as low as 270 mV. The Li-O batteries employing the bifunctional CoS/SnO@C catalyst displays a high discharge specific capacity of 3332.25 mAh g and long cycling life of 226 cycles. Additionally, theory calculations demonstrate that the construction of heterostructure decreases energy barrier of the rate-determining step (RDS) for both ORR and OER. Notably, SnO behaves as the electronic promoter to optimize the electronic structure of heterostructure interface and triggers charge redistribution of CoS, which weakens the adsorption strength of the O-intermediates and allows to break the linear scaling relationship, thus further enhancing the catalytic performance of CoS/SnO@C. This research furnishes directions for the design of heterogeneous catalysts, highlighting its great potential for application in rechargeable Li-O batteries.

Download full-text PDF

Source
http://dx.doi.org/10.1002/smll.202406516DOI Listing

Publication Analysis

Top Keywords

li-o batteries
16
electronic promoter
8
linear scaling
8
scaling relationship
8
high discharge
8
cos/sno@c
5
promoter breaks
4
breaks linear
4
relationship ultra-rapid
4
ultra-rapid high-temperature
4

Similar Publications

Enhancing Li-O battery performance with conductive hierarchical metal-organic framework composite cathodes.

Dalton Trans

March 2025

School of Chemistry and Chemical Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, People's Republic of China.

Li-O batteries are recognized for their high theoretical capacity and energy density, positioning them as excellent candidates for next-generation energy storage. This study explores the use of Metal-Organic Frameworks (MOFs) with high specific surface areas and open metal sites as cathode materials to address existing challenges. We developed conductive "cactus-like" composites by employing hydroxylated graphene (G-OH) as a substrate to grow columnar M(HHTP) and MM(HHTP) (M = Cu, Ni) in a one-pot synthesis, enhancing the structure's conductivity and order.

View Article and Find Full Text PDF

High Entropy Oxide-Polyoxometalate Sub-1 nm Hetero-Nanowires as Cathode Catalysts in Li-O Batteries.

J Am Chem Soc

March 2025

Engineering Research Center of Advanced Rare Earth Materials, Department of Chemistry, Tsinghua University, Beijing 100084, China.

It is desirable for lithium-oxygen batteries (LOBs) to fabricate the cathode catalysts with high catalytic activity and stability. High entropy oxide (HEO) sub-1 nm nanowires (SNWs) with the nearly 100% active site exposure and intrinsic stability are doubtless one of the best candidates. Herein, under a mild solvothermal condition, by incorporating phosphomolybdic acid (PMA) into multimetal oxide reaction system, a series of HEO-PMA SNWs are successfully prepared, where the variety of metal oxides is adjustable from mono component to six components.

View Article and Find Full Text PDF

Polyoligomeric silsesquioxane (POSS) tailored with trifluoromethanesulfonylimide-lithium and solvated in tetraglyme (G4) is a potential electrolyte for Li-ion batteries. Using classical MD simulations, at different G4/POSS(-LiNSO2CF3)8 molar ratios, the interactions of Li+ ions with the oxygen atoms of G4 and, oxygen/nitrogen sites of the pendant tails, the behavior of POSS(--NSO2CF3)8 anion, and the mobility of species are investigated. The RDFs showed that there exist competing interactions of the O(G4), O(POSS), and N(POSS) sites with Li+ ions.

View Article and Find Full Text PDF

Synergy of O2 Permeance and H2O Resistance by PIM-Enhanced PDMS Composite Membranes for "Closed-Type" Aprotic Li-Air Batteries.

Small

February 2025

State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing, 210009, China.

Aprotic Li-O batteries exhibit ultra-high energy density through the redox reaction of O. However, their open-structure design makes them prone to water infiltration and electrolyte leakage. Traditionally, dense and thick oxygen-permeable membranes (OPMs) are employed to prevent HO intrusion, but this approach limits O permeance and constrains charge current densities.

View Article and Find Full Text PDF

The practical development of Li-O batteries is often hindered by poor cycling stability, which arises from volatile liquid electrolytes, an unstable anode/electrolyte interface, and sluggish reaction kinetics related to LiO. In this study, we design a long-life quasi-solid-state Li-O battery by integrating a gel polymer electrolyte (GPE) with a tetramethylpiperidinyloxy (TEMPO) redox mediator anchored in a poly(2,2,6,6-tetramethylpiperidinyloxy-4-methacrylate) (PTMA) cathode. During cycling, the GPE stabilizes the lithium/electrolyte interface and retains the electrolyte, while the TEMPO moieties anchored in the PTMA cathode effectively enhance the catalytic selectivity for LiO formation and decomposition.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!