Numerous problems, including weathering, cracks, leaks, and bending, among others, appear in concrete after construction. The optimum procedure for treating concrete cracks is the subject of this study. The research goal is to find potential crack treatment materials and analyze the effect on the properties of concrete caused by the addition of bacterial solution to the concrete mix along with a particular method of preparation of bacterial solution. The principal results of the experimental testing showcased a successive growth in the compressive strength when the concrete cubes were casted with the bacterial addition from Bacillus family with a significant change in the quality of concrete. Following are the primary research outcomes of the method:•Use of Bacillus bacterial with direct addition in concrete improves concrete's performance.•The proposed method of concrete mix with Bacillus Sphaericus Solution in 30 ml concentration, replacing partial water cement ratio, yields maximum compressive strength on 28th day curing. For expediting setting time with high compressive strength, adding Bacillus Sphaericus solution in 45 ml concentration is recommended.•For achieving a homogenous mix with lesser cracks on 28th day, Bacillus Subtilis Spores in 30 ml concentration can be added to concrete with partial replacement of the water requirement.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11758841PMC
http://dx.doi.org/10.1016/j.mex.2024.103151DOI Listing

Publication Analysis

Top Keywords

compressive strength
12
concrete
10
bacterial solution
8
concrete mix
8
bacillus sphaericus
8
sphaericus solution
8
solution concentration
8
28th day
8
bacillus
6
technique improving
4

Similar Publications

The inadequate thermal insulation of the building envelope contributes significantly to the high power consumption of air conditioners in houses. A crucial factor in raising a building's energy efficiency involves utilizing bricks with high thermal resistance. This issue is accompanied by another critical challenge: recycling and disposing of waste in a way that is both economically and environmentally beneficial, including using it to fuel industrial growth, in order to reduce the harmful effects of waste on the environment as waste generation in our societies grows.

View Article and Find Full Text PDF

In the manufacturing of some sectors, such as marble and brick, certain byproducts, such as sludge, powder, and pieces containing valuable chemical compounds, emerge. Some concrete plants utilize these byproducts as mineralogical additives in Turkey. The objective of the experimental study is to ascertain whether the incorporation of waste from the marble and brick industries, in powder form, into cement manufacturing as a mineralogical additive or substitute is a viable option.

View Article and Find Full Text PDF

Zinc oxide nanoparticle-embedded tannic acid/chitosan-based sponge: A highly absorbent hemostatic agent with enhanced antimicrobial activity.

Int J Biol Macromol

January 2025

Nanotechnology Research Center, Faculty of Pharmacy, Tehran University of Medical Sciences, Tehran 1416634793, Iran; Wound Care Solution, Nano Fanavaran Narin Teb Co., Tehran, P.O. Box 19177-53531, Iran; Physical Chemistry I, Department of Chemistry and Biology & Research Center of Micro and Nanochemistry and Engineering (Cμ), University of Siegen, 57076 Siegen, Germany. Electronic address:

This study reports the development of a highly absorbent Chitosan (CS)/Tannic Acid (TA) sponge, synthesized via chemical cross-linking with Epichlorohydrin (ECH) and integrated with zinc oxide nanoparticles (ZnO NPs) as a novel hemostatic anti-infection agent. The chemical properties of the sponges were characterized using Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and zeta potential measurements. Morphological and elemental analyses conducted through scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDAX) revealed a uniform distribution of ZnO NPs, with particle sizes below 20 nm.

View Article and Find Full Text PDF

This study introduces a novel landfill cover material, employing lake sediment as a substrate, stabilised with fly ash, slag, desulfurisation gypsum and construction waste. The mechanical properties, including shear strength parameters, unconfined compressive strength, hydraulic conductivity, volumetric shrinkage, and water content, of the solidified sludge were evaluated. The microscopic mechanism of the solidified sludge were investigated through XRD, FTIR, and SEM-EDS techniques.

View Article and Find Full Text PDF

Incorporating zinc into biocompatible materials has been identified as a potential strategy for promoting bone regeneration and osteogenic activity during hard tissue regeneration. This work aimed to investigate the impact of zinc doping on the structure of akermanite, which was synthesized using the sol-gel combustion method, with the goal of improving the biological response. Powder XRD and FT-IR analysis confirmed the phase purity and the respective functional groups associated with Zn-doped akermanite.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!